Visible to Intel only — GUID: zgc1566295620939
Ixiasoft
1. Intel® Agilex™ SEU Mitigation Overview
2. Intel® Agilex™ CRAM Error Mitigation
3. Secure Device Manager ECC and SmartVID Errors Detection
4. Intel® Agilex™ SEU Mitigation Implementation Guides
5. IP and Software References
6. Intel® Agilex™ SEU Mitigation User Guide Archives
7. Document Revision History for the Intel® Agilex™ SEU Mitigation User Guide
4.6.1. Launching and Setting Up the Fault Injection Debugger
4.6.2. Configuring Your Device using a Software Object File (.sof)
4.6.3. Constraining Regions for Fault Injection
4.6.4. Injecting Errors to Random Locations
4.6.5. Injecting Errors to Specific Locations
4.6.6. Injecting Double Adjacent Errors
4.6.7. Injecting SDM ECC Errors
4.6.8. Analyzing SEU or SDM ECC Errors Using Signal Tap
Visible to Intel only — GUID: zgc1566295620939
Ixiasoft
4.6.1. Launching and Setting Up the Fault Injection Debugger
Before you begin, set up the SEU mitigation features to enable error detection and fault injection.
To use the Fault Injection Debugger tool, connect it to the device through the JTAG interface and configure the JTAG chain.
- From the Intel® Quartus® Prime main menu, select Tools > Fault Injection Debugger.
- In the Programmer Fault Injection Debugger window, click Hardware Setup.
The Hardware Setup windows displays the programming hardware connected to your computer.
- Select the programming hardware you want to use.
- Click Close.
- In the Programmer Fault Injection Debugger window, click Auto Detect.
The Auto Detect command populates the device chain with the programmable devices found in the JTAG chain.
Related Information