Intel® Agilex™ SEU Mitigation User Guide

ID 683128
Date 12/30/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

5.2.1. Fault Injection Debugger GUI Tool

You can access the Fault Injection Debugger GUI by selecting Tools > Fault Injection Debugger from the main menu of the Intel® Quartus® Prime software.
Figure 18.  Fault Injection Debugger GUI


Table 12.   Fault Injection Debugger GUI Control
Section Control Description
Main Hardware Setup Click to open the Hardware Setup window.
Chain Process Start Click to start the program or configure the device.
Auto Detect Click to scan the JTAG chain of the specified hardware and graphically display the device chain.
Select File Click to browse and select the .sof file.
Program/Configure Turn on to call the Programmer backend engine to program or configure the device.
Fault Injection Inject Fault Turn on to inject faults to random locations.
Run For Select to set the number of fault injection iterations before the tool stop injecting errors.
Run until stopped Select to set the tool to keep injecting faults until you click Stop.
Start Click to start the injecting faults.
Stop Click to stop injecting faults.
Read EMR Click to direct the tool to read the error message queue.