Visible to Intel only — GUID: kfh1631720447512
Ixiasoft
1. Intel® Agilex™ SEU Mitigation Overview
2. Intel® Agilex™ CRAM Error Mitigation
3. Secure Device Manager ECC and SmartVID Errors Detection
4. Intel® Agilex™ SEU Mitigation Implementation Guides
5. IP and Software References
6. Intel® Agilex™ SEU Mitigation User Guide Archives
7. Document Revision History for the Intel® Agilex™ SEU Mitigation User Guide
4.6.1. Launching and Setting Up the Fault Injection Debugger
4.6.2. Configuring Your Device using a Software Object File (.sof)
4.6.3. Constraining Regions for Fault Injection
4.6.4. Injecting Errors to Random Locations
4.6.5. Injecting Errors to Specific Locations
4.6.6. Injecting Double Adjacent Errors
4.6.7. Injecting SDM ECC Errors
4.6.8. Analyzing SEU or SDM ECC Errors Using Signal Tap
Visible to Intel only — GUID: kfh1631720447512
Ixiasoft
4.6.7.1. Injecting SDM ECC Errors: Command-Line Interface
In the command-line interface, run the quartus_fid command with the following syntax:
quartus_fid -–cable=<cable_num> --index=@<device_num>=<sof_file> --number=<n> --ecc="@<device_num>=<sector_location> <error_type>"
Values for <error_type>:
- 1—single bit error
- 2—double bits error
Examples of the quartus_fid Command
-
quartus_fid --cable=1 --index=@1=test.sof --number=1 --ecc="@1=0x07 1"
-
quartus_fid -c 1 -i "@1=test.sof" -n 1 -e "@1=0x07 1"