Intel® Agilex™ SEU Mitigation User Guide

ID 683128
Date 12/30/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.6.4. Injecting Errors to Random Locations

To inject errors to random locations on the device, subject to the constrained ASD regions, use the Fault Injection Debugger tool.
Before you begin, set up the hardware for the Fault Injection Debugger.
  1. In the Fault Injection Debugger tool, under the Fault Injection box, turn on Inject Fault.
  2. If you want the fault injection to run a specific number of iterations, select Run for and specify the number of iterations.
  3. If you want the fault injection to run continuously from when you click Start until you click Stop:
    1. Select Run until stopped.
    2. From the menu, select Tools > Options.
    3. In the Options window, specify the Injection interval time.
  4. Click Start.
    The Intel® Quartus® Prime Messages window shows messages about the injected errors.
  5. To view more information about the injected faults, click Read EMR.
    The Fault Injection Debugger retrieves the content of the error message queue and displays it in the Messages window.
  6. If you selected Run until stopped, click Stop to stop the fault injection runs.