P-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide

Download PDF
ID 683059
Date 10/02/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About the P-tile Avalon® Intel® FPGA IPs for PCI Express 2. IP Architecture and Functional Description 3. Advanced Features 4. Interfaces 5. Parameters 6. Testbench 7. Troubleshooting/Debugging 8. P-tile Avalon® Streaming Intel FPGA IP for PCI Express* User Guide Archives 9. Document Revision History for the P-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide A. Configuration Space Registers B. Root Port Enumeration C. Implementation of Address Translation Services (ATS) in Endpoint Mode D. Packets Forwarded to the User Application in TLP Bypass Mode E. Using the Avery BFM for Intel P-Tile PCI Express Gen4 x16 Simulations F. Bifurcated Endpoint Support for Independent Warm Resets G. Margin Masks for the P-Tile Avalon Streaming Intel FPGA IP for PCI Express
1. About the P-tile Avalon® Intel® FPGA IPs for PCI Express x
1.1. Overview 1.2. Features 1.3. Release Information 1.4. Device Family Support 1.5. Performance and Resource Utilization 1.6. IP Core and Design Example Support Levels
1.1. Overview x
1.1.1. Standards and Specifications Compliance
2. IP Architecture and Functional Description x
2.1. Architecture 2.2. Functional Description
2.1. Architecture x
2.1.1. Clock Domains 2.1.2. Refclk 2.1.3. Reset
2.1.3. Reset x
2.1.3.1. Independent PERST
2.2. Functional Description x
2.2.1. PMA/PCS 2.2.2. Data Link Layer Overview 2.2.3. Transaction Layer Overview
3. Advanced Features x
3.1. PCIe* Port Bifurcation and PHY Channel Mapping 3.2. Virtualization Support 3.3. TLP Bypass Mode
3.2. Virtualization Support x
3.2.1. SR-IOV Support 3.2.2. VirtIO Support
3.2.1. SR-IOV Support x
3.2.1.1. SR-IOV Supported Features List 3.2.1.2. Implementation 3.2.1.3. VF to PF Mapping 3.2.1.4. Function Level Reset (FLR)
3.2.1.2. Implementation x
3.2.1.2.1. VF Error Flag Interface (for x16/x8 Cores Only)
3.2.2. VirtIO Support x
3.2.2.1. VirtIO Supported Features List 3.2.2.2. Overview 3.2.2.3. Parameters 3.2.2.4. VirtIO PCI Configuration Access Interface 3.2.2.5. Registers
3.2.2.5. Registers x
3.2.2.5.1. VirtIO Common Configuration Capability Register (Address: 0x012) 3.2.2.5.2. VirtIO Common Configuration BAR Indicator Register (Address: 0x013) 3.2.2.5.3. VirtIO Common Configuration BAR Offset Register (Address: 0x014) 3.2.2.5.4. VirtIO Common Configuration Structure Length Register (Address 0x015) 3.2.2.5.5. VirtIO Notifications Capability Register (Address: 0x016) 3.2.2.5.6. VirtIO Notifications BAR Indicator Register (Address: 0x017) 3.2.2.5.7. VirtIO Notifications BAR Offset Register (Address: 0x018) 3.2.2.5.8. VirtIO Notifications Structure Length Register (Address: 0x019) 3.2.2.5.9. VirtIO Notifications Notify Off Multiplier Register (Address: 0x01A) 3.2.2.5.10. VirtIO ISR Status Capability Register (Address: 0x02F) 3.2.2.5.11. VirtIO ISR Status BAR Indicator Register (Address: 0x030) 3.2.2.5.12. VirtIO ISR Status BAR Offset Register (Address: 0x031) 3.2.2.5.13. VirtIO ISR Status Structure Length Register (Address: 0x032) 3.2.2.5.14. VirtIO Device Specific Capability Register (Address: 0x033) 3.2.2.5.15. VirtIO Device Specific BAR Indicator Register (Address: 0x034) 3.2.2.5.16. VirtIO Device Specific BAR Offset Register (Address 0x035 ) 3.2.2.5.17. VirtIO Device Specific Structure Length Register (Address: 0x036) 3.2.2.5.18. VirtIO PCI Configuration Access Capability Register (Address: 0x037) 3.2.2.5.19. VirtIO PCI Configuration Access BAR Indicator Register (Address: 0x038) 3.2.2.5.20. VirtIO PCI Configuration Access BAR Offset Register (Address: 0x039) 3.2.2.5.21. VirtIO PCI Configuration Access Structure Length Register (Address: 0x03A) 3.2.2.5.22. VirtIO PCI Configuration Access Data Register (Address: 0x03B)
3.3. TLP Bypass Mode x
3.3.1. Overview 3.3.2. Register Settings for the TLP Bypass Mode 3.3.3. User Avalon® -MM Interface 3.3.4. Avalon® -ST Interface
3.3.2. Register Settings for the TLP Bypass Mode x
3.3.2.1. TLPBYPASS_ERR_EN (Address 0x104194) 3.3.2.2. TLPBYPASS_ERR_STATUS (Address 0x104190)
3.3.4. Avalon® -ST Interface x
3.3.4.1. Configuration TLP 3.3.4.2. Transmit Interface 3.3.4.3. Receive Interface 3.3.4.4. Malformed TLP 3.3.4.5. ECRC
4. Interfaces x
4.1. Overview 4.2. Clocks and Resets 4.3. Serial Data Interface 4.4. Avalon-ST Interface 4.5. Hard IP Status Interface 4.6. Interrupt Interface 4.7. Error Interface 4.8. Hot Plug Interface (RP Only) 4.9. Power Management Interface 4.10. Configuration Output Interface 4.11. Configuration Intercept Interface (EP Only) 4.12. Hard IP Reconfiguration Interface 4.13. PHY Reconfiguration Interface 4.14. Page Request Service (PRS) Interface (EP Only)
4.2. Clocks and Resets x
4.2.1. Interface Clock Signals 4.2.2. Resets
4.2.2. Resets x
4.2.2.1. Interface Reset Signals 4.2.2.2. Function-Level Reset (FLR) Interface (EP Only)
4.4. Avalon-ST Interface x
4.4.1. TLP Header and Data Alignment for the Avalon-ST RX and TX Interfaces 4.4.2. Avalon® -ST RX Interface 4.4.3. Avalon® -ST RX Interface rx_st_ready Behavior 4.4.4. RX Flow Control Interface 4.4.5. Avalon® -ST TX Interface 4.4.6. Avalon® -ST TX Interface tx_st_ready Behavior 4.4.7. TX Flow Control Interface 4.4.8. Tag Allocation
4.4.8. Tag Allocation x
4.4.8.1. Completion Buffer Size
4.6. Interrupt Interface x
4.6.1. Legacy Interrupts 4.6.2. MSI 4.6.3. MSI-X
4.6.3. MSI-X x
4.6.3.1. Implementing MSI-X Interrupts
4.7. Error Interface x
4.7.1. Completion Timeout Interface 4.7.2. VF Error Flags Interface
4.12. Hard IP Reconfiguration Interface x
4.12.1. Address Map for the User Avalon-MM Interface 4.12.2. Configuration Registers Access
4.12.1. Address Map for the User Avalon-MM Interface x
4.12.1.1. User Avalon-MM Control Register (Offset 0x104068)
4.12.2. Configuration Registers Access x
4.12.2.1. Using Direct User Avalon-MM Interface (Byte Access) 4.12.2.2. Using the Debug Register Interface Access (Dword Access)
5. Parameters x
5.1. Top-Level Settings 5.2. Core Parameters
5.2. Core Parameters x
5.2.1. Avalon® Parameters 5.2.2. Base Address Registers 5.2.3. PCI Express and PCI Capabilities Parameters 5.2.4. Device Identification Registers 5.2.5. Configuration, Debug and Extension Options
5.2.3. PCI Express and PCI Capabilities Parameters x
5.2.3.1. Device Capabilities 5.2.3.2. VirtIO Parameters 5.2.3.3. Link Capabilities 5.2.3.4. Legacy Interrupt Pin Register 5.2.3.5. MSI Capabilities 5.2.3.6. MSI-X Capabilities 5.2.3.7. Slot Capabilities 5.2.3.8. Latency Tolerance Reporting (LTR) 5.2.3.9. Process Address Space ID (PASID) 5.2.3.10. Device Serial Number Capability 5.2.3.11. Page Request Service (PRS) 5.2.3.12. Access Control Service (ACS) Capabilities 5.2.3.13. Power Management 5.2.3.14. Vendor Specific Extended Capability (VSEC) Registers 5.2.3.15. TLP Processing Hints (TPH) 5.2.3.16. Address Translation Services (ATS) Capabilities
5.2.3.1. Device Capabilities x
5.2.3.1.1. Multifunction and SR-IOV System Parameters
6. Testbench x
6.1. Endpoint Testbench 6.2. Test Driver Module 6.3. Root Port BFM
6.3. Root Port BFM x
6.3.1. BFM Memory Map 6.3.2. Configuration Space Bus and Device Numbering 6.3.3. Configuration of Root Port and Endpoint 6.3.4. Issuing Read and Write Transactions to the Application Layer 6.3.5. BFM Procedures and Functions
6.3.5. BFM Procedures and Functions x
6.3.5.1. ebfm_barwr Procedure 6.3.5.2. ebfm_barwr_imm Procedure 6.3.5.3. ebfm_barrd_wait Procedure 6.3.5.4. ebfm_barrd_nowt Procedure 6.3.5.5. ebfm_cfgwr_imm_wait Procedure 6.3.5.6. ebfm_cfgwr_imm_nowt Procedure 6.3.5.7. ebfm_cfgrd_wait Procedure 6.3.5.8. ebfm_cfgrd_nowt Procedure 6.3.5.9. BFM Configuration Procedures 6.3.5.10. BFM Shared Memory Access Procedures 6.3.5.11. BFM Log and Message Procedures 6.3.5.12. Verilog HDL Formatting Functions
6.3.5.9. BFM Configuration Procedures x
6.3.5.9.1. ebfm_cfg_rp_ep Procedure 6.3.5.9.2. ebfm_cfg_decode_bar Procedure
6.3.5.10. BFM Shared Memory Access Procedures x
6.3.5.10.1. Shared Memory Constants 6.3.5.10.2. shmem_write Task 6.3.5.10.3. shmem_read Function 6.3.5.10.4. shmem_display Verilog HDL Function 6.3.5.10.5. shmem_fill Procedure 6.3.5.10.6. shmem_chk_ok Function
6.3.5.11. BFM Log and Message Procedures x
6.3.5.11.1. ebfm_display Verilog HDL Function 6.3.5.11.2. ebfm_log_stop_sim Verilog HDL Function 6.3.5.11.3. ebfm_log_set_suppressed_msg_mask Task 6.3.5.11.4. ebfm_log_set_stop_on_msg_mask Verilog HDL Task 6.3.5.11.5. ebfm_log_open Verilog HDL Function 6.3.5.11.6. ebfm_log_close Verilog HDL Function
6.3.5.12. Verilog HDL Formatting Functions x
6.3.5.12.1. himage1 6.3.5.12.2. himage2 6.3.5.12.3. himage4 6.3.5.12.4. himage8 6.3.5.12.5. himage16 6.3.5.12.6. dimage1 6.3.5.12.7. dimage2 6.3.5.12.8. dimage3 6.3.5.12.9. dimage4 6.3.5.12.10. dimage5 6.3.5.12.11. dimage6 6.3.5.12.12. dimage7
7. Troubleshooting/Debugging x
7.1. Hardware 7.2. Debug Toolkit
7.1. Hardware x
7.1.1. Debugging Link Training Issues 7.1.2. Debugging Data Transfer and Performance Issues
7.1.1. Debugging Link Training Issues x
7.1.1.1. Generic Tools and Utilities 7.1.1.2. Signal Tap II Logic Analyzer 7.1.1.3. Additional Debug Tools
7.1.2. Debugging Data Transfer and Performance Issues x
7.1.2.1. Advanced Error Reporting (AER) 7.1.2.2. Second-Level Debug Tools
7.2. Debug Toolkit x
7.2.1. Overview 7.2.2. Enabling the P-Tile Debug Toolkit 7.2.3. Launching the P-Tile Debug Toolkit 7.2.4. Using the P-Tile Debug Toolkit 7.2.5. Using the P-Tile Link Inspector
A. Configuration Space Registers x
A.1. Configuration Space Registers A.2. Configuration Space Registers for Virtualization A.3. Intel-Defined VSEC Capability Registers
A.1. Configuration Space Registers x
A.1.1. Register Access Definitions A.1.2. PCIe Configuration Header Registers A.1.3. PCI Express Capability Structures A.1.4. Physical Layer 16.0 GT/s Extended Capability Structure A.1.5. MSI-X Registers
A.2. Configuration Space Registers for Virtualization x
A.2.1. SR-IOV Virtualization Extended Capabilities Registers Address Map A.2.2. PCIe Configuration Registers for Each Virtual Function
A.2.2. PCIe Configuration Registers for Each Virtual Function x
A.2.2.1. Alternative Routing ID (ARI) Capability Structure A.2.2.2. TLP Processing Hint (TPH) Capability Structure A.2.2.3. Address Translation Services (ATS) Capability Structure A.2.2.4. Access Control Services (ACS) Capability Structure
A.2.2.1. Alternative Routing ID (ARI) Capability Structure x
A.2.2.1.1. ARI Enhanced Capability Header Register (Offset 0x0) A.2.2.1.2. ARI Capability and Control Register (Offset 0x4)
A.2.2.2. TLP Processing Hint (TPH) Capability Structure x
A.2.2.2.1. TPH Requester Enhanced Capability Header (Offset 0x0) A.2.2.2.2. TPH Requester Capability Register (Offset 0x4) A.2.2.2.3. TPH Requester Control Register (Offset 0x8)
A.2.2.3. Address Translation Services (ATS) Capability Structure x
A.2.2.3.1. ATS Enhanced Capability Header (Offset 0x0) A.2.2.3.2. ATS Capability Register and ATS Control Register (Offset 0x4)
A.2.2.4. Access Control Services (ACS) Capability Structure x
A.2.2.4.1. ACS Extended Capability Header (Offset 0x0) A.2.2.4.2. ACS Capability Register (Offset 0x4) A.2.2.4.3. ACS Control Register (Offset 0x6) A.2.2.4.4. Egress Control Vector (Offset 0x8)
A.3. Intel-Defined VSEC Capability Registers x
A.3.1. Intel-Defined VSEC Capability Header (Offset 00h) A.3.2. Intel-Defined Vendor Specific Header (Offset 04h) A.3.3. Intel Marker (Offset 08h) A.3.4. JTAG Silicon ID (Offset 0x0C - 0x18) A.3.5. User Configurable Device and Board ID (Offset 0x1C - 0x1D) A.3.6. General Purpose Control and Status Register (Offset 0x30) A.3.7. Uncorrectable Internal Error Status Register (Offset 0x34) A.3.8. Uncorrectable Internal Error Mask Register (Offset 0x38) A.3.9. Correctable Internal Error Status Register (Offset 0x3C) A.3.10. Correctable Internal Error Mask Register (Offset 0x40)
C. Implementation of Address Translation Services (ATS) in Endpoint Mode x
C.1. Sending Translated/Untranslated Requests C.2. Sending a Page Request Message from the Endpoint (EP) to the Root Complex (RC) C.3. Invalidating Requests/Completions
D. Packets Forwarded to the User Application in TLP Bypass Mode x
D.1. EP TLP Bypass Mode (Upstream) D.2. RC TLP Bypass Mode (Downstream)
E. Using the Avery BFM for Intel P-Tile PCI Express Gen4 x16 Simulations x
E.1. Overview E.2. Generate the PCIe PIO Example Design E.3. Integrate Avery BFMs (Root Complex) E.4. Configure the Avery BFM and Update the Simulation Script E.5. Compile and Simulate E.6. View the Results
E.2. Generate the PCIe PIO Example Design x
E.2.1. Avalon® -ST PCIe PIO Example Design
F. Bifurcated Endpoint Support for Independent Warm Resets x
F.1. PCI Express Resets F.2. P-tile PCIe Design Constraints
F.2. P-tile PCIe Design Constraints x
F.2.1. P-tile Dual-Endpoint System Configurations
G. Margin Masks for the P-Tile Avalon Streaming Intel FPGA IP for PCI Express x
G.1. Margin Masks Overview G.2. Nx5 Testing Efficiency G.3. Debug Toolkit Margin Methodology
G.2. Nx5 Testing Efficiency x
G.2.1. First Time Testing G.2.2. Spot Check Testing
G.3. Debug Toolkit Margin Methodology x
G.3.1. Debug Toolkit (DTK) Testing Process G.3.2. DTK Margin Evaluation Based on Margin Mask Values
1. About the P-tile Avalon® Intel® FPGA IPs for PCI Express
2. IP Architecture and Functional Description
3. Advanced Features
4. Interfaces
5. Parameters
6. Testbench
7. Troubleshooting/Debugging
8. P-tile Avalon® Streaming Intel FPGA IP for PCI Express* User Guide Archives
9. Document Revision History for the P-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide
A. Configuration Space Registers
B. Root Port Enumeration
C. Implementation of Address Translation Services (ATS) in Endpoint Mode
D. Packets Forwarded to the User Application in TLP Bypass Mode
E. Using the Avery BFM for Intel P-Tile PCI Express Gen4 x16 Simulations
F. Bifurcated Endpoint Support for Independent Warm Resets
G. Margin Masks for the P-Tile Avalon Streaming Intel FPGA IP for PCI Express

4.4.2. Avalon® -ST RX Interface

The Application Layer receives data from the Transaction Layer of the PCI Express* IP core over the Avalon® -ST RX interface. The application must assert rx_st_ready_i before transfers can begin.

This interface supports two rx_st_sop_o signals and two rx_st_eop_o signals per cycle when the P-Tile IP is operating in a 1x16 configuration. It also does not follow a fixed latency between rx_st_ready_i and rx_st_valid_o.

The x16 core provides two segments with each one having 256 bits of data (rx_st_data_o[511:256] and rx_st_data_o[255:0]), 128 bits of header (rx_st_hdr_o[255:128] and rx_st_hdr_o[127:0]), and 32 bits of TLP prefix (rx_st_tlp_prfx_o[63:32] and rx_st_tlp_prfx_o[31:0]). If this core is configured in the 1x16 mode, both segments are used, so the data bus becomes a 512-bit bus rx_st_data_o[511:0]. The start of packet can appear in the upper segment or lower segment, as indicated by the rx_st_sop_o[1:0] signals.

Note: To achieve the expected performance in Gen4 x16 mode, the user application needs to take advantage of this segmented bus architecture. Otherwise, some performance reduction may occur.

If this core is configured in the 2x8 or 1x8 modes, only the lower segment is used. In this case, the data bus is a 256-bit bus rx_st_data_o[255:0].

Finally, if this core is configured in the 4x4 mode, only the lower segment is used and only the MSB 128 bits of data are valid. In this case, the data bus is a 128-bit bus rx_st_data_o[127:0].

The x8 core provides one segment with 256 bits of data, 128 bits of header and 32 bits of TLP prefix. If this core is configured in 4x4 mode, only the LSB 128 bits of data are used.

The x4 core provides one segment with 128 bits of data, 128 bits of header and 32 bits of TLP prefix.

Table 52.  Avalon-ST RX Interface
Signal Name Direction Description Clock Domain EP/RP/BP

x16 PCIe configuration: rx_st_data_o[511:0]

x8 PCIe configuration: rx_st_data_o[255:0]

x4 configuration: rx_st_data_o[127:0]

O

This is the Receive data bus. The Application Layer receives data from the Transaction Layer on this bus.

For TLPs with an end-of-packet cycle in the lower 256 bits, the 512-bit interface supports a start-of-packet cycle in the upper 256 bits.

coreclkout_hip EP/RP/BP

x16: rx_st_empty_o[5:0]

x8: rx_st_empty_o[2:0]

x4: rx_st_empty_o[1:0]

O

The rx_st_empty_o[5:0] bus is a split bus in x16 mode. rx_st_empty_o[5:3] correspond to the upper segment (rx_st_data_o[511:256]), and rx_st_empty_o[2:0] correspond to the lower segment (rx_st_data_o[255:0]).

The rx_st_empty_o signals specify the number of dwords that are ignored in each segment. The ignored dwords must be counted starting from the most significant bits of each segment.

The rx_st_empty_o signals are only valid when the rx_st_eop_o signals are asserted. These signals are not valid when the rx_st_eop_o signals are not asserted.

coreclkout_hip EP/RP/BP
rx_st_ready_i I

Indicates the Application Layer is ready to accept data.

The readyLatency is 27 cycles.

If rx_st_ready_i is deasserted by the Application Layer on cycle <n>, the Transaction Layer in the PCIe Hard IP continues to send traffic up to <n>+ readyLatency cycles after the deassertion of rx_st_ready_i.

Once rx_st_ready_i reasserts, rx_st_valid_o resumes data transfer within readyLatency cycles.

To achieve the best performance, the Application Layer must include a receive buffer large enough to avoid the deassertion of rx_st_ready_i.

coreclkout_hip EP/RP/BP

x16: rx_st_sop_o[1:0]

x8/x4: rx_st_sop_o

O

Signals the first cycle of the TLP when asserted in conjunction with the corresponding bit of rx_st_valid_o[1:0].

rx_st_sop_o[1]: When asserted, signals the start of a TLP on rx_st_data_o[511:256].

rx_st_sop_o[0]: When asserted, signals the start of a TLP on rx_st_data_o[255:0].

coreclkout_hip EP/RP/BP

x16: rx_st_eop_o[1:0]

x8/x4: rx_st_eop_o

O

The rx_st_eop_o[1:0] bus is a split bus in x16 mode.

When asserted, rx_st_eop_o[1] signals the end of a TLP on the upper segment (rx_st_data_o[511:256]).

When asserted, rx_st_eop_o[0] signals the end of a TLP on the lower segment (rx_st_data_o[255:0]).

The rx_st_eop_o signals indicate the last cycle of the TLP when asserted in conjunction with the corresponding bit of rx_st_valid_o[1:0].

coreclkout_hip EP/RP/BP

x16: rx_st_valid_o[1:0]

x8/x4: rx_st_valid_o

O

These signals qualify the rx_st_data_o signals going into the Application Layer.

coreclkout_hip EP/RP/BP

x16: rx_st_hdr_o[255:0]

x8/x4: rx_st_hdr_o[127:0]

O

This is the received header, which follows the TLP header format of the PCIe specifications.

coreclkout_hip EP/RP/BP

x16: rx_st_tlp_prfx_o[63:0]

x8/x4: rx_st_tlp_prfx_o[31:0]

O

This is the first TLP prefix received, which follows the TLP prefix format of the PCIe specifications. PASID is included.

These signals are valid when the corresponding rx_st_sop_o is asserted.

The TLP prefix uses a Big Endian implementation (i.e, the Fmt field is in bits [31:29] and the Type field is in bits [28:24]).

If no prefix is present for a given TLP, that dword (including the Fmt field) is all zeros.

coreclkout_hip EP/RP/BP

x16: rx_st_vf_active_o[1:0]

x8: rx_st_vf_active_o

x4: NA

 O

When asserted, these signals indicate that the received TLP is targeting a virtual function. When these signals are deasserted, the received TLP is targeting a physical function and the rx_st_func_num signals indicate the function number.

These signals are valid when the corresponding rx_st_sop_o is asserted.

These signals are multiplexed with the rx_st_hdr_o signals in the x4 configuration.

These signals are valid in Endpoint mode only.

 coreclkout_hip EP

x16: rx_st_func_num_o[5:0]

x8: rx_st_func_num_o[2:0]

x4: NA

 O

Specify the target physical function number for the received TLP.

These signals are valid when the corresponding rx_st_sop_o is asserted.

These signals are multiplexed with the rx_st_hdr_o signals in the x4 configuration.

These signals are valid in Endpoint mode only.

 coreclkout_hip EP

x16: rx_st_vf_num_o[19:0]

x8: rx_st_vf_num_o[10:0]

x4: NA

 O

Specify the target VF number for the received TLP. The application uses this information for both request and completion TLPs. For a completion TLP, these bits specify the VF number of the requester for this completion TLP.

These signals are valid when rx_st_vf_active_o and the corresponding rx_st_sop_o are asserted.

These signals are multiplexed with the rx_st_hdr_o signals in the x4 configuration.

These signals are valid in Endpoint mode only.

 coreclkout_hip EP

x16: rx_st_bar_range_o[5:0]

x8/x4: rx_st_bar_range_o[2:0]

O

Specify the BAR for the TLP being output.

For each BAR range, the following encodings are defined:
  • 000: Memory BAR 0
  • 001: Memory BAR 1
  • 010: Memory BAR 2
  • 011: Memory BAR 3
  • 100: Memory BAR 4
  • 101: Memory BAR 5
  • 110: I/O BAR
  • 111: Expansion ROM BAR

These outputs are valid when both rx_st_sop_o and rx_st_valid_o are asserted.

coreclkout_hip EP

x16: rx_st_tlp_abort_o[1:0]

x8/x4: rx_st_tlp_abort_o

O

This output signal is valid when rx_st_valid_o is asserted. It indicates to the application logic to drop a TLP because of an ECRC error. Application logic should not expect the TLP to be replayed.

By default, the PCIe Hard IP drops errored TLPs. However, while in TLP Bypass mode, errored TLPs are forwarded to the RX packet interface.

coreclkout_hip BP

x16: rx_st_data_par_o[63:0]

x8: rx_st_data_par_o[31:0]

x4: rx_st_data_par_o[15:0]

O If Enable Byte Parity Ports on Avalon-ST Interface parameter is enabled, application logic can use these signals to perform parity checking for rx_st_data_o. If a parity error is detected at the input of the Rx buffer inside the PCIe Hard IP, rx_par_err_o signal will be asserted. coreclkout_hip EP/RP/BP

x16: rx_st_hdr_par_o[31:0]

x8/x4: rx_st_hdr_par_o[15:0]

O If Enable Byte Parity Ports on Avalon-ST Interface parameter is enabled, application logic can use these signals to perform parity checking for rx_st_hdr_o. If a parity error is detected at the input of the Rx buffer inside the PCIe Hard IP, rx_par_err_o signal will be asserted. coreclkout_hip EP/RP/BP

x16: rx_st_tlp_prfx_par_o[7:0]

x8/x4: rx_st_tlp_prfx_par_o[3:0]

O If Enable Byte Parity Ports on Avalon-ST Interface parameter is enabled, application logic can use these signals to perform parity checking for rx_st_prfx_o. If a parity error is detected at the input of the Rx buffer inside the PCIe Hard IP, rx_par_err_o signal will be asserted. coreclkout_hip EP/RP/BP
rx_par_err_o O Asserted for a single cycle to indicate that a parity error was detected in a TLP at the input of the RX buffer. This error is logged as an uncorrectable internal error in the VSEC registers. If this error occurs, you must reset the Hard IP because parity errors can leave the Hard IP in an unknown state. coreclkout_hip EP/RP/BP
Figure 17.  Avalon® -ST RX Packet Interface in 1x16 Mode
Figure 18.  Avalon® -ST RX Packet Interface in 2x8 and 1x8 Modes
Note: In 2x8 mode, the pn prefix in the signal names is p0 and p1 for the two x8 ports. In 1x8 mode, the pn prefix in the signal names is p0 for the one x8 port.
Figure 19.  Avalon® -ST RX Packet Interface in 4x4 Mode
Note: In 4x4 mode, the pn prefix in the signal names is p0, p1, p2 and p3 for the four x4 ports.
Note: In the diagrams for the 1x16 mode or 2x8 and 1x8 modes, D0_0 represents a 256-bit block of data. However, in the diagram for the 4x4 mode, D0_0 represents a 128-bit block of data.
Level Two Title