F-Tile Ethernet Intel® FPGA Hard IP User Guide

ID 683023
Date 6/20/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

5.1. Clock Connections in Single Instance Operation

This clock connection describes a single IP core instantiation in your design.

This is a typical clock connection requirement in a single IP core.

You must make the following clock connections:
  • The i_clk_ref and the i_clk_sys clocks drive the IP core.
  • The output clock o_clk_pll drives both the i_clk_rx and the i_clk_tx input signals.
Figure 20. Typical Clock ConnectionsThis diagram displays single Ethernet IP core and its related clock signals.
Table 24.  Port Connection Guidelines between F-Tile Auto-Negotiation and Link Training for Ethernet Intel® FPGA IP and F-Tile Ethernet Intel® FPGA Hard IP
F-Tile Auto-Negotiation and Link Training for Ethernet Intel® FPGA IP F-Tile Ethernet Intel® FPGA Hard IP
System PLL
out_systempll_clk i_clk_sys
FGT
out_refclk_fgt i_clk_ref
FHT
out_fht_cmmpll_clk i_clk_ref