Intel® Stratix® 10 Hard Processor System Remote System Update User Guide

Download PDF
ID 683021
Date 11/10/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Overview 2. Use Cases 3. Quad SPI Flash Layout 4. Intel® Quartus® Prime Software and Tool Support 5. Software Support 6. Flash Corruption - Detection and Recovery 7. Remote System Update Example 8. Version Compatibility Considerations 9. Using RSU with HPS First A. Configuration Flow Diagrams B. RSU Status and Error Codes C. U-Boot RSU Reference Information D. LIBRSU Reference Information E. Combined Application Images 10. Document Revision History for the Intel® Stratix® 10 SoC Remote System Update User Guide
1. Overview x
1.1. Features 1.2. System Components 1.3. Glossary
2. Use Cases x
2.1. Manufacturing 2.2. Application Image Boot 2.3. Factory Image Boot 2.4. Modifying the List of Application Images 2.5. Querying RSU Status 2.6. Loading a Specific Image 2.7. Protected Access to Flash 2.8. Remote System Update Watchdog 2.9. RSU Notify 2.10. Updating the Factory Image 2.11. Updating the Decision Firmware 2.12. Retrying when Configuration Fails 2.13. Querying the Decision Firmware Version
3. Quad SPI Flash Layout x
3.1. High Level Flash Layout 3.2. Detailed Quad SPI Flash Layout 3.3. Decision Firmware Data Max Retry Information 3.4. Firmware Version Information
3.1. High Level Flash Layout x
3.1.1. Standard (non-RSU) Image Layout in Flash 3.1.2. RSU Image Layout in Flash – SDM Perspective 3.1.3. RSU Image Layout – Your Perspective
3.2. Detailed Quad SPI Flash Layout x
3.2.1. RSU Image Sub-Partitions Layout 3.2.2. Sub-Partition Table Layout 3.2.3. Configuration Pointer Block Layout 3.2.4. Application Image Layout
4. Intel® Quartus® Prime Software and Tool Support x
4.1. Intel® Quartus® Prime Pro Edition Software 4.2. Programming File Generator 4.3. Intel® Quartus® Prime Programmer 4.4. Supported QSPI Flash Devices
4.1. Intel® Quartus® Prime Pro Edition Software x
4.1.1. Selecting Factory Load Pin 4.1.2. Enabling HPS Watchdog to Trigger RSU 4.1.3. Setting the Max Retry Parameter
4.2. Programming File Generator x
4.2.1. Programming File Generator File Types 4.2.2. Bitswap Option
5. Software Support x
5.1. SDM RSU Support 5.2. Arm Trusted Firmware Support 5.3. U-Boot RSU Support 5.4. Linux* RSU Support
5.3. U-Boot RSU Support x
5.3.1. U-Boot RSU APIs 5.3.2. U-Boot RSU Commands
5.4. Linux* RSU Support x
5.4.1. Intel® Service Driver 5.4.2. Intel® RSU Driver 5.4.3. LIBRSU Library 5.4.4. RSU Client
6. Flash Corruption - Detection and Recovery x
6.1. Decision Firmware 6.2. Decision Firmware Data 6.3. Configuration Pointer Block 6.4. Sub-Partition Table 6.5. Application Image 6.6. Factory Image 6.7. Example Maintenance Procedure
6.7. Example Maintenance Procedure x
6.7.1. Maintenance Procedure
6.7.1. Maintenance Procedure x
6.7.1.1. Recover Decision Firmware Procedure
7. Remote System Update Example x
7.1. Prerequisites 7.2. Building RSU Example Binaries 7.3. Flashing the Binaries 7.4. Exercising U-Boot RSU Commands 7.5. Exercising the RSU Client
7.2. Building RSU Example Binaries x
7.2.1. Setting up the Environment 7.2.2. Building the Hardware Projects 7.2.3. Building Arm* Trusted Firmware 7.2.4. Building U-Boot 7.2.5. Creating the Initial Flash Image 7.2.6. Creating the Application Image 7.2.7. Creating the Factory Update Image 7.2.8. Creating the Decision Firmware Update Image 7.2.9. Building Linux* 7.2.10. Building ZLIB 7.2.11. Building LIBRSU and RSU Client 7.2.12. Building the Root File System 7.2.13. Building the SD Card
7.3. Flashing the Binaries x
7.3.1. Flashing the Initial RSU Image to QSPI 7.3.2. Writing the SD Card Image
7.4. Exercising U-Boot RSU Commands x
7.4.1. Using U-Boot to Perform Basic Operations 7.4.2. Watchdog and Max Retry Operation 7.4.3. Updating the Factory Image Using U-Boot 7.4.4. Fallback on Flash Corruption of Application Images 7.4.5. Additional Flash Corruption Detection and Recovery
7.4.5. Additional Flash Corruption Detection and Recovery x
7.4.5.1. Corrupted Decision Firmware 7.4.5.2. Corrupted Decision Firmware Data 7.4.5.3. Corrupted Configuration Pointer Block 7.4.5.4. Corrupted Sub-Partition Table
7.5. Exercising the RSU Client x
7.5.1. Using the RSU Client to Perform Basic Operations 7.5.2. Watchdog Timeout and max retry Operation 7.5.3. Updating the Factory Image Using the RSU Client 7.5.4. Fallback on Flash Corruption of Application Images 7.5.5. Additional Flash Corruption Detection and Recovery
7.5.5. Additional Flash Corruption Detection and Recovery x
7.5.5.1. Corrupted Decision Firmware 7.5.5.2. Corrupted Decision Firmware Data 7.5.5.3. Corrupted Configuration Pointer Block 7.5.5.4. Corrupted Sub-Partition Table
8. Version Compatibility Considerations x
8.1. Component Versions 8.2. Component Interfaces 8.3. Component Version Compatibility 8.4. Using Multiple Intel® Quartus® Prime Software Versions for Bitstreams 8.5. Updating U-Boot to Support Different SSBL per Bitstream
8.5. Updating U-Boot to Support Different SSBL per Bitstream x
8.5.1. Using Multiple SSBLs with SD/MMC 8.5.2. Using Multiple SSBLs with QSPI 8.5.3. U-Boot Source Code Details
9. Using RSU with HPS First x
9.1. Update Hardware Designs to use HPS First 9.2. Creating Initial Flash Image for HPS First 9.3. Creating Application and Update Images for HPS First
A. Configuration Flow Diagrams x
A.1. Load Image on Power Up or nConfig Flow A.2. Try Loading Image Process A.3. Request Specific Image Flow A.4. Configure after Image Failure Process A.5. Watchdog Timeout Flow
C. U-Boot RSU Reference Information x
C.1. Configuration Parameters C.2. Error Codes C.3. Using U-Boot RSU Without a Valid SPT or CPB C.4. Macros C.5. Data Types C.6. Functions C.7. RSU U-Boot Commands
C.1. Configuration Parameters x
C.1.1. rsu_protected_slot C.1.2. rsu_log_level C.1.3. rsu_spt_checksum
C.5. Data Types x
C.5.1. rsu_slot_info C.5.2. rsu_status_info
C.6. Functions x
C.6.1. rsu_init C.6.2. rsu_exit C.6.3. rsu_slot_count C.6.4. rsu_slot_by_name C.6.5. rsu_slot_get_info C.6.6. rsu_slot_size C.6.7. rsu_slot_priority C.6.8. rsu_slot_erase C.6.9. rsu_slot_program_buf C.6.10. rsu_slot_program_factory_update_buf C.6.11. rsu_slot_program_buf_raw C.6.12. rsu_slot_verify_buf C.6.13. rsu_slot_verify_buf_raw C.6.14. rsu_slot_enable C.6.15. rsu_slot_disable C.6.16. rsu_slot_load C.6.17. rsu_slot_load_factory C.6.18. rsu_slot_rename C.6.19. rsu_slot_delete C.6.20. rsu_slot_create C.6.21. rsu_status_log C.6.22. rsu_notify C.6.23. rsu_clear_error_status C.6.24. rsu_reset_retry_counter C.6.25. rsu_dcmf_version C.6.26. rsu_max_retry C.6.27. rsu_dcmf_status C.6.28. rsu_create_empty_cpb C.6.29. rsu_restore_cpb C.6.30. rsu_save_cpb C.6.31. rsu_restore_spt C.6.32. rsu_save_spt C.6.33. rsu_running_factory
C.7. RSU U-Boot Commands x
C.7.1. dtb C.7.2. list C.7.3. slot_by_name C.7.4. slot_count C.7.5. slot_disable C.7.6. slot_enable C.7.7. slot_erase C.7.8. slot_get_info C.7.9. slot_load C.7.10. slot_load_factory C.7.11. slot_priority C.7.12. slot_program_buf C.7.13. slot_program_buf_raw C.7.14. slot_program_factory_update_buf C.7.15. slot_rename C.7.16. slot_delete C.7.17. slot_create C.7.18. slot_size C.7.19. slot_verify_buf C.7.20. slot_verify_buf_raw C.7.21. status_log C.7.22. update C.7.23. notify C.7.24. clear_error_status C.7.25. reset_retry_counter C.7.26. display_dcmf_version C.7.27. display_dcmf_status C.7.28. display_max_retry C.7.29. restore_spt C.7.30. save_spt C.7.31. create_empty_cpb C.7.32. restore_cpb C.7.33. save_cpb C.7.34. check_running_factory
D. LIBRSU Reference Information x
D.1. Configuration File D.2. Error Codes D.3. Using LIBRSU Without a Valid SPT or CPB D.4. Macros D.5. Data Types D.6. Functions D.7. RSU Client Commands
D.5. Data Types x
D.5.1. rsu_slot_info D.5.2. rsu_status_info D.5.3. rsu_data_callback
D.6. Functions x
D.6.1. librsu_init D.6.2. librsu_exit D.6.3. rsu_slot_count D.6.4. rsu_slot_by_name D.6.5. rsu_slot_get_info D.6.6. rsu_slot_size D.6.7. rsu_slot_priority D.6.8. rsu_slot_erase D.6.9. rsu_slot_program_buf D.6.10. rsu_slot_program_factory_update_buf D.6.11. rsu_slot_program_file D.6.12. rsu_slot_program_factory_update_file D.6.13. rsu_slot_program_buf_raw D.6.14. rsu_slot_program_file_raw D.6.15. rsu_slot_verify_buf D.6.16. rsu_slot_verify_file D.6.17. rsu_slot_verify_buf_raw D.6.18. rsu_slot_verify_file_raw D.6.19. rsu_slot_program_callback D.6.20. rsu_slot_program_callback_raw D.6.21. rsu_slot_verify_callback D.6.22. rsu_slot_verify_callback_raw D.6.23. rsu_slot_copy_to_file D.6.24. rsu_slot_enable D.6.25. rsu_slot_disable D.6.26. rsu_slot_load_after_reboot D.6.27. rsu_slot_load_factory_after_reboot D.6.28. rsu_slot_rename D.6.29. rsu_slot_delete D.6.30. rsu_slot_create D.6.31. rsu_status_log D.6.32. rsu_notify D.6.33. rsu_clear_error_status D.6.34. rsu_reset_retry_counter D.6.35. rsu_dcmf_version D.6.36. rsu_max_retry D.6.37. rsu_dcmf_status D.6.38. rsu_save_spt D.6.39. rsu_restore_spt D.6.40. rsu_save_cpb D.6.41. rsu_create_empty_cpb D.6.42. rsu_restore_cpb D.6.43. rsu_running_factory
D.7. RSU Client Commands x
D.7.1. count D.7.2. list D.7.3. size D.7.4. priority D.7.5. enable D.7.6. disable D.7.7. request D.7.8. request-factory D.7.9. erase D.7.10. add D.7.11. add-factory-update D.7.12. add-raw D.7.13. verify D.7.14. verify-raw D.7.15. copy D.7.16. log D.7.17. notify D.7.18. clear-error-status D.7.19. reset-retry-counter D.7.20. display-dcmf-version D.7.21. display-dcmf-status D.7.22. display-max-retry D.7.23. create-slot D.7.24. delete-slot D.7.25. restore-spt D.7.26. save-spt D.7.27. create-empty-cpb D.7.28. restore-cpb D.7.29. save-cpb D.7.30. check-running-factory D.7.31. help
E. Combined Application Images x
E.1. Creating the Combined Application Image E.2. Using the Combined Application Image
1. Overview
2. Use Cases
3. Quad SPI Flash Layout
4. Intel® Quartus® Prime Software and Tool Support
5. Software Support
6. Flash Corruption - Detection and Recovery
7. Remote System Update Example
8. Version Compatibility Considerations
9. Using RSU with HPS First
A. Configuration Flow Diagrams
B. RSU Status and Error Codes
C. U-Boot RSU Reference Information
D. LIBRSU Reference Information
E. Combined Application Images
10. Document Revision History for the Intel® Stratix® 10 SoC Remote System Update User Guide

7.4.2. Watchdog and Max Retry Operation

This section uses U-Boot to demonstrate the following:
  • RSU handling of watchdog timeouts.
  • max retry feature, which allows each image to be tried to be loaded up to three times.
  • RSU notify, which allows the HPS software state to be reported before and retrieved after a watchdog timeout.
  • Clearing the RSU status error fields.
  • Resetting the current retry counter value.
Note: The commands listed in this section rely on the commands from the Basic Operation section running first, specifically adding an application image to the P2 flash partition.
  1. Power-cycle the board, stop U-Boot and check the RSU status log: 
    SOCFPGA # rsu status_log
Current Image   : 0x02000000
Last Fail Image : 0x00000000
State           : 0x00000000
Version         : 0x00000202
Error location  : 0x00000000
Error details   : 0x00000000
Retry counter   : 0x00000000

    The application image from slot 1 (partition P2) was loaded, since it is marked as the highest priority in the CPB.

    What do the fields mean:
    • Version field is 0x00000202 —both decision firmware and application firmware RSU interface versions are 2, and the system supports the max retry feature.
    • Retry counter is 0x00000000 —first attempt to load this image.
    • State is 0x00000000 —No errors to report
  2. Query and display the max_retry value: 
    SOCFPGA # rsu display_max_retry 
max_retry = 3
  3. Cause a watchdog timeout by setting the timeout value to lowes possible. This prevents U-Boot from being able to service it in time: 
    SOCFPGA # mw.l 0xffd00204 0
  4. The watchdog immediately times out, and SDM reloads the same application image, since the max retry parameter is set to three. Look at the U-Boot console and check the status log: 
    SOCFPGA # rsu status_log
Current Image   : 0x02000000
Last Fail Image : 0x02000000
State           : 0xf0060001
Version         : 0x0acf0202
Error location  : 0x00000000
Error details   : 0x00000000
Retry counter   : 0x00000001

    The same P2 image is loaded, but the retry counter value is now one, which means this is the second retry for this image to be loaded. The version field shows the last failure was by an application image (0xACF). The state field shows the last error was a watchdog timeout (0xF006) and that the latest notify value from HPS software was from SPL loading U-Boot (0x0001).

  5. Clear the error status so we can see the next errors. Query the status to show the errors were cleared: 
    SOCFPGA # rsu clear_error_status
SOCFPGA # rsu status_log 
Current Image   : 0x02000000
Last Fail Image : 0x00000000
State           : 0x00000000
Version         : 0x00000202
Error location  : 0x00000000
Error details   : 0x00000000
Retry counter   : 0x00000001
  6. Cause another watchdog timeout. At the U-Boot prompt, query the RSU log and observe that the retry counter is now two: 
    SOCFPGA # rsu status_log
Current Image   : 0x02000000
Last Fail Image : 0x02000000
State           : 0xf0060001
Version         : 0x0acf0202
Error location  : 0x00000000
Error details   : 0x00000000
Retry counter   : 0x00000002
  7. Clear the error status so we can see the next errors.
  8. Use the notify command to let SDM know the state of HPS software as a 16bit value: 
    SOCFPGA0 # rsu notify 0x1234
  9. Cause a watchdog timeout one more time and display the RSU status log after the restart: 
    SOCFPGA # rsu status_log
Current Image   : 0x01000000
Last Fail Image : 0x02000000
State           : 0xf0061234
Version         : 0x0acf0202
Error location  : 0x00000000
Error details   : 0x00000000
Retry counter   : 0x00000000

    The SDM loaded the next application image in the CPB (P1), and it reports that the image P2 failed. The state indicates that a watchdog timeout occurred (upper 16 bits = 0xF006) and that the notify value reported by HPS software was 0x1234. The upper 16 bits of version are set to 0x0ACF which means the previous error was reported by the application image firmware. For more information, refer to RSU Status and Error Codes .

  10. Clear the errors and display the status - it shows no errors: 
    SOCFPGA # rsu clear_error_status
SOCFPGA # rsu status_log
Current Image   : 0x01000000
Last Fail Image : 0x00000000
State           : 0x00000000
Version         : 0x00000202
Error location  : 0x00000000
Error details   : 0x00000000
Retry counter   : 0x00000000
  11. Cause a watchdog timeout, boot to U-Boot, and display the status - it shows the retry counter is one: 
    SOCFPGA # rsu status_log
Current Image   : 0x01000000
Last Fail Image : 0x01000000
State           : 0xf0060001
Version         : 0x0acf0202
Error location  : 0x00000000
Error details   : 0x00000000
Retry counter   : 0x00000001
  12. Reset the current retry counter value to zero and query the status again to confirm it: 
    SOCFPGA # rsu reset_retry_counter
SOCFPGA # rsu status_log         
Current Image   : 0x01000000
Last Fail Image : 0x01000000
State           : 0xf0060001
Version         : 0x0acf0202
Error location  : 0x00000000
Error details   : 0x00000000
Retry counter   : 0x00000000
Level Two Title