MIPI CSI-2 Intel® FPGA IP User Guide

Download PDF
ID 813926
Date 4/26/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About the MIPI CSI-2 Intel® FPGA IP 2. MIPI CSI-2 Intel® FPGA IP Interface Overview 3. MIPI CSI-2 Intel® FPGA IP Parameters 4. Designing with the MIPI CSI-2 Intel® FPGA IP 5. MIPI CSI-2 Intel® FPGA IP Block Descriptions 6. Registers 7. Document Revision History for MIPI CSI-2 Intel® FPGA IP User Guide
1. About the MIPI CSI-2 Intel® FPGA IP x
1.1. MIPI CSI-2 Intel® FPGA IP Features 1.2. Device Family Support for MIPI CSI-2 Intel® FPGA IP 1.3. Recommended Speed Grades 1.4. MIPI CSI-2 Intel® FPGA IP Performance and Resource Utilization 1.5. Release Information for MIPI CSI-2 Intel® FPGA IP
2. MIPI CSI-2 Intel® FPGA IP Interface Overview x
2.1. MIPI CSI-2 Intel® FPGA IP Clocks 2.2. MIPI CSI-2 Intel® FPGA IP Resets 2.3. MIPI CSI-2 Intel® FPGA IP User Interfaces
2.3. MIPI CSI-2 Intel® FPGA IP User Interfaces x
2.3.1. Receiver PHY Protocol Interface (PPI) Signals 2.3.2. Avalon® Memory-Mapped Interface Control Interface Signals 2.3.3. Receiver AXI4-Streaming Output Video Interface Signals 2.3.4. Receiver AXI4-Stream Output Passthrough Interface 2.3.5. Transmitter PHY-Protocol Interface (PPI) Signals 2.3.6. Transmitter AXI4-Stream Input Video Interface Signals 2.3.7. Transmitter AXI4-Stream Input Passthrough Interface
4. Designing with the MIPI CSI-2 Intel® FPGA IP x
4.1. Generating the MIPI CSI-2 Intel® FPGA IP 4.2. MIPI CSI-2 Intel® FPGA IP Generation Output Quartus® Prime Pro Edition 4.3. MIPI CSI-2 Intel® FPGA IP Systems Integration and Implementation
4.2. MIPI CSI-2 Intel® FPGA IP Generation Output Quartus® Prime Pro Edition x
4.2.1. Files Generated for Intel® FPGA IP Cores and Platform Designer Systems
4.3. MIPI CSI-2 Intel® FPGA IP Systems Integration and Implementation x
4.3.1. D-PHY PHY Protocol Interface (PPI) Clock Frequencies 4.3.2. MIPI CSI-2 Receiver Clock Requirements 4.3.3. MIPI CSI-2 Transmitter Clock Requirements 4.3.4. Required Supporting IP 4.3.5. Limitations and Known Issues
5. MIPI CSI-2 Intel® FPGA IP Block Descriptions x
5.1. MIPI CSI-2 Receiver 5.2. MIPI CSI-2 Transmitter
6. Registers x
6.1. CSI-2 Receiver Register Map 6.2. CSI-2 Transmitter Register Map
1. About the MIPI CSI-2 Intel® FPGA IP
2. MIPI CSI-2 Intel® FPGA IP Interface Overview
3. MIPI CSI-2 Intel® FPGA IP Parameters
4. Designing with the MIPI CSI-2 Intel® FPGA IP
5. MIPI CSI-2 Intel® FPGA IP Block Descriptions
6. Registers
7. Document Revision History for MIPI CSI-2 Intel® FPGA IP User Guide

4.2.1. Files Generated for Intel® FPGA IP Cores and Platform Designer Systems

Figure 2. Files Generated for IP Cores and Platform Designer Systems
Table 18.  IP Core and Platform Designer Simulation Files
File Name Description
<my_ip>.cmp The VHDL Component Declaration (.cmp) file is a text file that contains local generic and port definitions that you can use in VHDL design files.
<my_ip>_generation.rpt IP or Platform Designer generation log file. A summary of the messages during IP generation.
<my_ip>.qgsimc Simulation caching file that compares the .qsys and .ip files with the current parameterization of the Platform Designer system and IP core. This comparison determines if Platform Designer can skip regeneration of the HDL.
<my_ip>.qgsynth Synthesis caching file that compares the .qsys and .ip files with the current parameterization of the Platform Designer system and IP core. This comparison determines if Platform Designer can skip regeneration of the HDL.
<my_ip>.qip Contains all the required information about the IP component to integrate and compile the IP component in the Quartus® Prime software.
<my_ip>.csv Contains information about the upgrade status of the IP component.

<my_ip>.bsf

A Block Symbol File (.bsf) representation of the IP variation for use in Block Diagram Files (.bdf).
<my_ip<>.spd Required input file for ip-make-simscript to generate simulation scripts for supported simulators. The .spd file contains a list of files generated for simulation, along with information about memories that you can initialize.
<my_ip>_bb.v Use the Verilog black box (_bb.v) file as an empty module declaration for use as a black box.
<my_ip>_inst.v or _inst.vhd HDL example instantiation template. Copy and paste the contents of this file into your HDL file to instantiate the IP variation.
<my_ip>.v <my_ip>.vhd HDL files that instantiate each submodule or child IP core for synthesis or simulation.
mentor/ Contains a Questa* Intel® FPGA Edition script msim_setup.tcl to set up and run a simulation.
aldec/ Contains a Riviera-PRO script rivierapro_setup.tcl to setup and run a simulation.

/synopsys/vcs

/synopsys/vcsmx

Contains a shell script vcs_setup.sh to set up and run a VCS® simulation.

Contains a shell script vcsmx_setup.sh and synopsys_ sim.setup file to set up and run a VCS MX® simulation.

/cadence Contains a shell script ncsim_setup.sh and other setup files to set up and run an NCSIM simulation.
/xcelium Contains a shell script xcelium_setup.sh and other setup files to set up and run a Xcelium simulation.
/common Contains a set of Tcl files, <simulator>_files.tcl, which provide all design related simulation information required by a corresponding simulation script. The Tcl file contains designs from current system-level hierarchy, and references to sub-systems and IP components.
<IP submodule>/ For each generated IP submodule directory, Platform Designer generates /synth and /sim sub-directories.
Level Two Title