AN 952: Intel® Arria® 10 and Intel® Stratix® 10 HDMI 2.1 System Design Guidelines

Download PDF
ID 709310
Date 6/21/2022
Public
Document Table of Contents
Document Table of Contents x
1. Terms and Acronyms 2. Introduction 3. Prerequisites and Scope 4. System Design Guidelines Requirements 5. HDMI 2.1 Compliance Test Specification 6. Future System Level Optimization 7. Document Revision History for AN 952: Intel® Arria® 10 and Intel® Stratix® 10 HDMI 2.1 System Design Guidelines
4. System Design Guidelines Requirements x
4.1. Enabling PCB panel design 4.2. PCB Best Practices 4.3. System Link Budgeting Recommendations
4.3. System Link Budgeting Recommendations x
4.3.1. FPGA TX Settings 4.3.2. FPGA RX Settings
4.3.2. FPGA RX Settings x
4.3.2.1. Intel® Stratix® 10-specific RX Feature
5. HDMI 2.1 Compliance Test Specification x
5.1. Protocol IP Compliance Test Specification 5.2. Electrical Compliance Test Specification 5.3. Performance and Cost Considerations
6. Future System Level Optimization x
6.1. Availability of Redrivers or Retimers 6.2. The Intel Agilex® Platform
1. Terms and Acronyms
2. Introduction
3. Prerequisites and Scope
4. System Design Guidelines Requirements
5. HDMI 2.1 Compliance Test Specification
6. Future System Level Optimization
7. Document Revision History for AN 952: Intel® Arria® 10 and Intel® Stratix® 10 HDMI 2.1 System Design Guidelines

6.2. The Intel Agilex® Platform

The card design for the Intel® Arria® 10 and Intel® Stratix® 10 families works on a typical level shifters from 1.8 V up to 3.3 V. However, to support future platform families and to extend the time frame for portability, Intel recommends a daughtercard level shifter of 1.0 V for general purpose (GPIO).

Intel recommends a card design that includes DDC lines with proper pullup termination; the signals require mitigating voltage drop along the compliant cables.

Level Two Title