F-Tile JESD204C Intel® FPGA IP User Guide

Download PDF
ID 691272
Date 4/29/2024
Public
Document Table of Contents
Document Table of Contents x
1. About the F-Tile JESD204C Intel® FPGA IP User Guide 2. Overview of the F-Tile JESD204C Intel® FPGA IP 3. Functional Description 4. Getting Started 5. Designing with the F-Tile JESD204C Intel® FPGA IP 6. F-Tile JESD204C Intel® FPGA IP Parameters 7. Interface Signals 8. Control and Status Registers 9. F-Tile JESD204C Intel® FPGA IP User Guide Archives 10. Document Revision History for the F-Tile JESD204C Intel® FPGA IP User Guide
2. Overview of the F-Tile JESD204C Intel® FPGA IP x
2.1. Release Information 2.2. Device Family Support 2.3. F-Tile JESD204C Intel® FPGA IP Features 2.4. Performance and Resource Utilization
3. Functional Description x
3.1. Clocks 3.2. Local Extended Multiblock Clock 3.3. CRC Encoding/Decoding 3.4. Scrambler/Descrambler
3.1. Clocks x
3.1.1. Device Clock 3.1.2. Frame Clock and Link Clock 3.1.3. System PLL
3.2. Local Extended Multiblock Clock x
3.2.1. LEMC Counter
4. Getting Started x
4.1. Installing and Licensing Intel® FPGA IP Cores 4.2. Intel® FPGA IP Evaluation Mode 4.3. IP Catalog and Parameter Editor 4.4. F-Tile JESD204C IP Component Files 4.5. Creating a New Quartus® Prime Project 4.6. Parameterizing and Generating the IP 4.7. Compiling the F-Tile JESD204C IP Design 4.8. Programming an FPGA Device
5. Designing with the F-Tile JESD204C Intel® FPGA IP x
5.1. Reset Initialization 5.2. Configuration Phase 5.3. Link Reinitialization 5.4. SYSREF Sampling 5.5. Interrupt and Error Handling 5.6. Multi-Device Synchronization 5.7. Deterministic Latency 5.8. Transceiver Toolkit
5.1. Reset Initialization x
5.1.1. F-Tile JESD204C TX Reset Sequence 5.1.2. F-Tile JESD204C RX Reset Sequence
5.5. Interrupt and Error Handling x
5.5.1. Interrupt Configuration for TX and RX 5.5.2. Interrupt Top Half ISR Handler 5.5.3. Interrupt Bottom Half ISR Handler
5.6. Multi-Device Synchronization x
5.6.1. Multi-Device DAC Application for Subclass 1 5.6.2. Multi-Device ADC Application for Subclass 1
5.7. Deterministic Latency x
5.7.1. RBD Tuning Mechanism
7. Interface Signals x
7.1. Transmitter Signals 7.2. Receiver Signals
8. Control and Status Registers x
8.1. Transmitter and Receiver Registers
1. About the F-Tile JESD204C Intel® FPGA IP User Guide
2. Overview of the F-Tile JESD204C Intel® FPGA IP
3. Functional Description
4. Getting Started
5. Designing with the F-Tile JESD204C Intel® FPGA IP
6. F-Tile JESD204C Intel® FPGA IP Parameters
7. Interface Signals
8. Control and Status Registers
9. F-Tile JESD204C Intel® FPGA IP User Guide Archives
10. Document Revision History for the F-Tile JESD204C Intel® FPGA IP User Guide

5.1. Reset Initialization

The F-Tile JESD204C base core and transport layer require various resets for the IP and transceiver. All the resets in the core assert asynchronously and deassert synchronously.
Table 14.   F-Tile JESD204C IP Resets
Reset Signal Clock Domain Description

j204c_tx_rst_n

j204c_rx_rst_n

Asynchronous Assertion of these signals resets all logic in the IP (MAC, TL, FIFOs).

j204c_tx_avs_rst_n

j204c_rx_avs_rst_n

TX/RX Avalon® memory-mapped reset for CSR

(j204c_tx_avs_clk/j204c_rx_avs_clk)

  • This reset is for the Avalon® memory-mapped slave interface, which consists of the Configuration and Status Register (CSR) blocks.
  • After this reset deasserts, configuration phase starts. You can program the CSR register values if a non-default value is required.

j204c_tx_rst_ack_n

j204c_rx_rst_ack_n

Asynchronous These signals acknowledge the state of j204c_tx_rst_n and j204c_rx_rst_n. The reset sequence completion is indicated by the assertion of these signals.
reconfig_xcvr_reset Asynchronous

Transceiver reconfiguration clock.

Active high signal. During duplex mode, both TX and RX share the same reconfiguration pins.

Intel recommends that you tie this signal to tx_avs_rst_n.


Section Content
F-Tile JESD204C TX Reset Sequence
F-Tile JESD204C RX Reset Sequence

Level Two Title