2023.06.26 |
23.2 |
2.1.0 |
- Updated Table: F-Tile JESD204C Intel® FPGA IP Performance
- Updated Table: F-Tile JESD204C Intel® FPGA IP Release Information
- Updated Table: F-Tile JESD204C Intel® FPGA IP Parameters
- Added Multilink mode parameter
- Updated Table: Top-level Receiver IP Core Signals
- Added information about the following two new signals for Multilink mode:
- j204c_rx_dev_emblock_align
- j204c_rx_alldev_emblock_align
|
2023.04.11 |
23.1 |
2.0.2 |
- Updated Table: Brief Information about the F-Tile JESD204C Intel® FPGA IP
- Updated description for Core Features
- Updated Table: F-Tile JESD204C Intel® FPGA IP Performance.
- Updated Table: F-Tile JESD204C Intel® FPGA IP Parameters:
- Updated value for Data rate parameter
- Replaced individual Transmitter Registers and Receiver Registers sections with a new combined Transmitter and Receiver Registers section that provides links to register maps
- Removed Table: Related Documents
- Updated the product family name to "Intel Agilex
7"
|
2023.02.10 |
22.2 |
1.1.0 |
- Fixed the links in Table 1: Related Documents.
|
2022.08.18 |
22.2 |
1.1.0 |
- Updated Table: F-Tile JESD204C Intel® FPGA IP Performance
|
2022.06.21 |
22.2 |
1.1.0 |
- Updated Table: F-Tile JESD204C IP Clocks
- Updated Table: F-Tile JESD204C Intel® FPGA IP Parameters:
- Updated value and description for Transceiver type parameter
- Updated Table: F-Tile JESD204C Intel® FPGA IP Performance:
- Updated Maximum Data Rate (Gbps) column
- Updated Table: Top-level Transmitter IP Core Signals
- Added j204c_syspll_div2_clk port signal
- Updated Table: Top-level Receiver IP Core Signals
- Added j204c_syspll_div2_clk port signal
- Updated topic: F-Tile JESD204C Intel FPGA IP User Guide Archives
|
2022.04.26 |
21.4 |
1.0.0 |
- Added Figure: Example Timing Diagram of j204c_txfclk_ctrl when FCLK_MULP=2
- Updated Table: Top-level Transmitter IP Core Signals
- Updated Table: Top-level Receiver IP Core Signals
|
2021.12.13 |
21.4 |
1.0.0 |
- Added new topics:
- Multi-Device Synchronization
- Multi-Device DAC Application for Subclass 1
- Multi-Device ADC Application for Subclass 1
- RBD Tuning Mechanism
- Transceiver Toolkit
- Added NPDME to Table: Acronym List.
- Updated Table: Related Documents.
- Updated Table: F-Tile JESD204C Intel® FPGA IP Parameters:
- Added a new parameter—Enable debug endpoint for PMA Avalon® memory-mapped interface .
- Updated parameter name Enable dynamic reconfiguration to Enable PMA Avalon® memory-mapped interface .
- Updated the following figures:
- Figure: F-Tile JESD204C Duplex Functional Block Diagram
- Figure: F-Tile JESD204C RX-only Functional Block Diagram
- Updated the descriptions and figure in F-Tile JESD204C TX Reset Sequence.
- Updated the descriptions and figure in F-Tile JESD204C RX Reset Sequence.
- Updated the description for reconfig_xcvr_clk in Table: Top-level Transmitter IP Core Signals.
- Added information about reconfig_xcvr_reset in the following tables:
- Table: Top-level Transmitter IP Core Signals
- Table: Top-level Receiver IP Core Signals
- Removed xcvr_pll_locked from Table: Top-level Transmitter IP Core Signals.
- Updated Deterministic Latency to correct the legal value of RBD count.
- Corrected the description for F-Tile JESD204C MAC to and from the PHY interface in Table: F-Tile JESD204C Intel® FPGA IP Interfaces to clarity that the IP can generate MAC and PHY configuration.
|
2021.10.11 |
21.3 |
1.0.0 |
Initial release. |