F-Tile Ethernet Intel® FPGA Hard IP Design Example User Guide

Download PDF
ID 683804
Date 7/09/2024
Public
Document Table of Contents
Document Table of Contents x
1. Quick Start Guide 2. Design Example: Single IP Core Instantiation 3. Design Example: Single IP Core Instantiation with Precision Time Protocol 4. Design Example: Single IP Core Instantiation with Auto-Negotiation and Link Training 5. Design Example: Multiple IP Core Instantiation 6. Design Example: Two Separate Instances of Auto-Negotiation and Link Training and Ethernet IP Design 7. F-Tile Ethernet Intel® FPGA Hard IP Design Example User Guide Archives 8. Document Revision History for the F-Tile Ethernet Intel FPGA Hard IP Design Example User Guide
1. Quick Start Guide x
1.1. Generating the Design 1.2. Directory Structure 1.3. Simulating the Design Example Testbench 1.4. Hardware and Software Requirements 1.5. Compiling and Configuring the Design Example in Hardware 1.6. Testing the F-Tile Ethernet Intel FPGA Hard IP Hardware Design Example 1.7. Register Maps
1.1. Generating the Design x
1.1.1. Generating Single IP Instance Design 1.1.2. Generating Two Separate Instances of IP Design 1.1.3. Generating Multiple IP Instance Design
1.3. Simulating the Design Example Testbench x
1.3.1. Fast Sim Model for FGT Variants 1.3.2. Fast Sim Model for FHT Variants
2. Design Example: Single IP Core Instantiation x
2.1. Features 2.2. Functional Description 2.3. Simulation 2.4. Packet Client Registers
2.2. Functional Description x
2.2.1. Variation: F-Tile Ethernet Intel FPGA Hard IP with FHT PMA
2.3. Simulation x
2.3.1. Simulation Testbench Flow for MAC Mode 2.3.2. Simulation Testbench Flow for PCS, OTN, and FlexE Modes
3. Design Example: Single IP Core Instantiation with Precision Time Protocol x
3.1. Features 3.2. Functional Description 3.3. Simulation 3.4. Hardware Design Example 3.5. Registers
4. Design Example: Single IP Core Instantiation with Auto-Negotiation and Link Training x
4.1. Features 4.2. Functional Description 4.3. Simulation 4.4. QSF Assignments 4.5. Hardware Design Example
5. Design Example: Multiple IP Core Instantiation x
5.1. Features 5.2. Functional Description 5.3. Simulation
6. Design Example: Two Separate Instances of Auto-Negotiation and Link Training and Ethernet IP Design x
6.1. Features 6.2. Functional Description 6.3. Simulation 6.4. QSF Assignments 6.5. Hardware Design Example
1. Quick Start Guide
2. Design Example: Single IP Core Instantiation
3. Design Example: Single IP Core Instantiation with Precision Time Protocol
4. Design Example: Single IP Core Instantiation with Auto-Negotiation and Link Training
5. Design Example: Multiple IP Core Instantiation
6. Design Example: Two Separate Instances of Auto-Negotiation and Link Training and Ethernet IP Design
7. F-Tile Ethernet Intel® FPGA Hard IP Design Example User Guide Archives
8. Document Revision History for the F-Tile Ethernet Intel FPGA Hard IP Design Example User Guide

2.3.1. Simulation Testbench Flow for MAC Mode

The following steps show the simulation testbench flow for MAC mode:
  1. Assert global reset (i_rst_n) to reset the F-Tile Ethernet Intel FPGA Hard IP.
  2. Wait until resets acknowledgment. The o_rst_ack_n signal goes low.
  3. Deasserts the global reset.
  4. Wait until o_tx_lanes_stable bit is set to 1, indicating TX path is ready.
  5. Wait until o_rx_pcs_ready bit is set to 1, indicating RX path is ready.
  6. Read TX packet data information from 0x00 - 0x34 registers in sequential order.
    • 0x00: Set hw_pc_ctrl[6] = 1'b1 to enable snapshot bit to read the TX packet statistics.
    • 0x020/0x24: TX start of packet counter (LSB/MSB)
    • 0x28/0x2C: TX end of packet counter (LSB/MSB)
    • 0x30/0x34: TX error counter (LSB/MSB)
    • 0x00: Set hw_pc_ctrl[6] = 1'b0 to disable snapshot bit.
  7. Read RX packet data information from 0x38 - 0x4C registers in sequential order.
    • 0x00: Set hw_pc_ctrl[6] = 1'b1 to enable snapshot bit to read the RX packet statistics.
    • 0x38/0x3C: RX start of packet counter (LSB/MSB)
    • 0x40/0x44: RX end of packet counter (LSB/MSB)
    • 0x48/0x4C: RX error counter (LSB/MSB)
    • 0x00: Set hw_pc_ctrl[6] = 1'b0 to disable snapshot bit.
  8. Compare read counters to ensure 16 packets were sent and received.
  9. Instruct packet client to stop data transmission by writing hw_pc_ctrl[2:0]=3'b100 to stop the packet generator. Clear counters.
  10. Perform Avalon® memory-mapped interface test. Write and read Ethernet IP registers.
    • 0x104: Scratch register
    • 0x108: Ethernet IP soft reset register
    • 0x214: TX MAC source address register [31:0]
    • 0x218: TX MAC source address register [47:32]
    • 0x21C: RX MAC frame size register
  11. Perform Avalon® memory-mapped interface 2 test. Write and read transceiver registers.

The following sample output illustrates a successful simulation test run. 
---SRC IP sequence started -----
---SRC IP sequence TX completed -----
---SRC IP sequence RX completed -----
---Test    0;   ---Total     16 packets to send-----
------Start pkt gen TX-----
------Checking Packet TX/RX result-----
------------  16 packets Sent;     0 packets Received--------
------ALL   16  packets Sent out---
------------  16 packets Sent;    16 packets Received--------
------ALL   16  packets Received---
------TX/RX packet check OK---
****Starting AVMM Read/Write****
===>MATCH! ReaddataValid = 1 Readdata = abcdef01 Expected_Readdata = abcdef01 
===>MATCH! ReaddataValid = 1 Readdata = 00000007 Expected_Readdata = 00000007 
===>MATCH! ReaddataValid = 1 Readdata = 00000000 Expected_Readdata = 00000000 
===>MATCH! ReaddataValid = 1 Readdata = 9d228c3a Expected_Readdata = 9d228c3a 
===>MATCH! ReaddataValid = 1 Readdata = 4338b586 Expected_Readdata = 4338b586 
===>MATCH! ReaddataValid = 1 Readdata = deadc0de Expected_Readdata = deadc0de 
===>MATCH! ReaddataValid = 1 Readdata = deadc0de Expected_Readdata = deadc0de 
===>MATCH! ReaddataValid = 1 Readdata = 00000000 Expected_Readdata = 00000000 
===>MATCH! ReaddataValid = 1 Readdata = 22334455 Expected_Readdata = 22334455 
===>MATCH! ReaddataValid = 1 Readdata = 00000011 Expected_Readdata = 00000011 
===>MATCH! ReaddataValid = 1 Readdata = 000005ee Expected_Readdata = 000005ee 
===>MATCH! ReaddataValid = 1 Readdata = 01234567 Expected_Readdata = 01234567 
===>MATCH! ReaddataValid = 1 Readdata = 000089ab Expected_Readdata = 000089ab 
743830ns  Try to access AVMM2 begin...
743830ns  write 0x00000065 to xcvr  0 address 0x103c004
744795ns  Try to access AVMM2 end...
744890ns  read from address 0x103c004
====>MATCH!     ReaddataValid = 1 Readdata = 00000065 Expected_Readdata = 00000065 

...

758740ns  Try to access AVMM2 end...
758840ns  Try to access AVMM2 begin...
758840ns  write 0x0000006c to xcvr  7 address 0x103c00b
759825ns  Try to access AVMM2 end...
759920ns  read from address 0x103c00b
====>MATCH!     ReaddataValid = 1 Readdata = 0000006c Expected_Readdata = 0000006c 
760900ns  Try to access AVMM2 end...
**** AVMM Read/Write Operation Completed ****
** Testbench complete
**
Level Two Title