Visible to Intel only — GUID: vgo1401366787378
Ixiasoft
1. HDMI Intel® FPGA IP Quick Reference
2. HDMI Overview
3. HDMI Intel® FPGA IP Getting Started
4. HDMI Hardware Design Examples
5. HDMI Source
6. HDMI Sink
7. HDMI Parameters
8. HDMI Simulation Example
9. HDMI Intel® FPGA IP User Guide Archives
10. Document Revision History for the HDMI Intel® FPGA IP User Guide
4.3.1.1. Transceiver Native PHY (RX)
4.3.1.2. PLL Intel FPGA IP Cores
4.3.1.3. PLL Reconfig Intel FPGA IP Core
4.3.1.4. Multirate Reconfig Controller (RX)
4.3.1.5. Oversampler (RX)
4.3.1.6. DCFIFO
4.3.1.7. Sink Display Data Channel (DDC) & Status and Control Data Channel (SCDC)
4.3.1.8. Transceiver Reconfiguration Controller
4.3.1.9. VIP Bypass and Audio, Auxiliary and InfoFrame Buffers
4.3.1.10. Transceiver Native PHY (TX)
4.3.1.11. Transceiver PHY Reset Controller
4.3.1.12. Oversampler (TX)
4.3.1.13. Clock Enable Generator
4.3.1.14. Platform Designer System
5.1. Source Functional Description
5.2. Source Interfaces
5.3. Source Clock Tree
5.4. Link Training Procedure
5.5. FRL Clocking Scheme
5.6. Valid Video Data
5.7. Source Deep Color Implementation When Support FRL = 0
5.8. Source Deep Color Implementation When Support FRL = 1
5.9. Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM)
5.1.1. Source Scrambler, TMDS/TERC4 Encoder
5.1.2. Source Video Resampler
5.1.3. Source Window of Opportunity Generator
5.1.4. Source Auxiliary Packet Encoder
5.1.5. Source Auxiliary Packet Generators
5.1.6. Source Auxiliary Data Path Multiplexers
5.1.7. Source Auxiliary Control Port
5.1.8. Source Audio Encoder
5.1.9. HDCP 1.4 TX Architecture
5.1.10. HDCP 2.3 TX Architecture
5.1.11. FRL Packetizer
5.1.12. FRL Character Block and Super Block Mapping
5.1.13. Reed-Solomon (RS) Forward Error Correction (FEC) Generation and Insertion
5.1.14. FRL Scrambler and Encoder
5.1.15. Source FRL Resampler
5.1.16. TX Oversampler
5.1.17. Clock Enable Generator
5.1.18. I2C Master
6.1.1. Sink Word Alignment and Channel Deskew
6.1.2. Sink Descrambler, TMDS/TERC4 Decoder
6.1.3. Sink Auxiliary Decoder
6.1.4. Sink Auxiliary Packet Capture
6.1.5. Sink Video Resampler
6.1.6. Sink Auxiliary Data Port
6.1.7. Sink Audio Decoder
6.1.8. Status and Control Data Channel (SCDC) Interface
6.1.9. HDCP 1.4 RX Architecture
6.1.10. HDCP 2.3 RX Architecture
6.1.11. FRL Depacketizer
6.1.12. Sink FRL Character Block and Super Block Demapper
6.1.13. Sink FRL Descrambler and Decoder
6.1.14. Sink FRL Resampler
6.1.15. RX Oversampler
6.1.16. I2C Slave
6.1.17. I2C and EDID RAM Blocks
6.1.18. Variable Refresh Rate(VRR) and Auto Low Latency Mode (ALLM)
Visible to Intel only — GUID: vgo1401366787378
Ixiasoft
4.3.2. HDMI Hardware Design Requirements
The HDMI design requires an Intel FPGA board and supporting hardware.
- Intel FPGA board
- Bitec HDMI HSMC 2.0 daughter card
- Standard HDMI source—for example, PC with a graphic card and HDMI output
- Standard HDMI sink—for example, monitor with HDMI input
- 2 HDMI cables
- A cable to connect the graphics card to the Bitec daughter card RX connector.
- A cable to connect the Bitec daughter card TX connector to the monitor.
Design Example | Intel FPGA Board | Bitec HDMI HSMC 2.0 Daughter Card |
---|---|---|
Arria V (av_sk) | Arria V GX FPGA Starter Kit | HSMC (Rev8) |
Arria V (av_sk_hdmi2) | Arria V GX FPGA Starter Kit | HSMC (Rev8) |
Stratix V (sv_hdmi2) | Stratix V GX FPGA Development Kit | HSMC (Rev8) |
Related Information