Intel® Agilex™ Device Configuration via Protocol (CvP) Implementation User Guide

Download PDF
ID 683763
Date 9/26/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Overview 2. CvP Description 3. CvP Topologies 4. Design Considerations 5. CvP Driver and Registers 6. Understanding the Design Steps for CvP Initialization using the Supported PCIe Tile in Intel® Agilex™ Devices 7. Intel® Agilex™ Device Configuration via Protocol (CvP) Implementation User Guide Archives 8. Document Revision History for the Intel® Agilex™ Device Configuration via Protocol (CvP) Implementation User Guide
1. Overview x
1.1. Benefits of Using CvP 1.2. CvP System 1.3. CvP Modes
1.3. CvP Modes x
1.3.1. CvP Limitations
1.3.1. CvP Limitations x
1.3.1.1. CvP Error Recovery
2. CvP Description x
2.1. Configuration Images 2.2. CvP Modes 2.3. Compression Features 2.4. Pin Description
2.2. CvP Modes x
2.2.1. CvP Initialization Mode 2.2.2. CvP Update Mode
3. CvP Topologies x
3.1. Single Endpoint 3.2. Multiple Endpoints
4. Design Considerations x
4.1. Designing CvP for an Open System 4.2. Designing CvP for a Closed System
4.1. Designing CvP for an Open System x
4.1.1. FPGA Power Supplies Ramp Time Requirement 4.1.2. PCIe Wake-Up Time Requirement
4.1.2. PCIe Wake-Up Time Requirement x
4.1.2.1. For CvP Initialization Mode 4.1.2.2. For CvP Update Mode
5. CvP Driver and Registers x
5.1. CvP Driver Support 5.2. CvP Driver Flow 5.3. VSEC Registers for CvP
5.3. VSEC Registers for CvP x
5.3.1. Vendor Specific Capability Header Register 5.3.2. Vendor Specific Header Register 5.3.3. Intel® Marker Register 5.3.4. User Configurable Device/Board ID Register 5.3.5. CvP Status Register 5.3.6. CvP Mode Control Register 5.3.7. CvP Data Registers 5.3.8. CvP Programming Control Register 5.3.9. CvP Credit Register
6. Understanding the Design Steps for CvP Initialization using the Supported PCIe Tile in Intel® Agilex™ Devices x
6.1. Implementation of CvP Initialization Mode 6.2. Implementation of CvP Update Mode
6.1. Implementation of CvP Initialization Mode x
6.1.1. Generating the Synthesis HDL files for Intel® FPGA P-Tile Avalon Streaming (Avalon-ST) for PCIe* Express 6.1.2. Setting up the CvP Parameters in Device and Pin Options 6.1.3. Compiling the Design 6.1.4. Converting the SOF File 6.1.5. Bringing up the Hardware
6.1.5. Bringing up the Hardware x
6.1.5.1. Installing the Upstream Open Source CvP Driver in Linux Systems 6.1.5.2. Setting Up the Correct MSEL Switch State 6.1.5.3. Programming CvP Images
6.2. Implementation of CvP Update Mode x
6.2.1. Instantiating the PCIe Hard IP 6.2.2. Setting Up the CvP Parameters 6.2.3. Setting Up the Base Revision 6.2.4. Setting Up and Compile the Updated Revision 6.2.5. Converting the SOF File 6.2.6. Programming the Core RBF file from the Updated Revision via PCIe Link
6.2.3. Setting Up the Base Revision x
6.2.3.1. Creating a Reserved Core Partition 6.2.3.2. Defining a Logic Lock Region 6.2.3.3. Compiling and Exporting the Root Partition
1. Overview
2. CvP Description
3. CvP Topologies
4. Design Considerations
5. CvP Driver and Registers
6. Understanding the Design Steps for CvP Initialization using the Supported PCIe Tile in Intel® Agilex™ Devices
7. Intel® Agilex™ Device Configuration via Protocol (CvP) Implementation User Guide Archives
8. Document Revision History for the Intel® Agilex™ Device Configuration via Protocol (CvP) Implementation User Guide

6.2.3.1. Creating a Reserved Core Partition

Follow these steps to create a reserved core partition from the base revision:

  1. In the Intel® Quartus® Prime Pro Edition software, elaborate the hierarchy of the design. Click Processing > Start > Start Analysis & Synthesis.
  2. In the Project Navigator window, right-click an instance and click Design Partition > Reserved Core. A design partition icon appears next to each instance you assign.
    Figure 15. Creating Design Partition form Project Navigator
    This setting corresponds to the following assignment in the .qsf file: 
    set_instance_assignment -name PARTITION <name> \
-to <partition hierarchical path>
  3. When defining the partition, select Reserved Core for the partition Type. Ensure all other partition options are set to default values.
    This setting corresponds to the following assignment in the .qsf file: 
    set_instance_assignment -name RESERVED CORE ON \
-to <partition hierarchical path>
  4. Click Assignments > Design Partitions Window to display the design partitions windows. To export the finalized static region from this base revision compile and to use in subsequent CvP update revision compile, in the Post Final Export File cell, double-click the entry for root_partition and type root_partition.qdb.
    Figure 16. Design Partitions Window
    This setting corresponds to the following assignment in the .qsf file: 
    set_instance_assignment -name EXPORT_PARTITION_SNAPSHOT_FINAL \
root_partition -to | -entity top
Level Two Title