Low Latency 40-Gbps Ethernet IP Core User Guide

Download PDF
ID 683745
Date 3/08/2021
Public
Document Table of Contents
Document Table of Contents x
1. About the LL 40GbE IP Core 2. Getting Started 3. Functional Description 4. Debugging the Link A. Arria 10 10GBASE-KR Registers B. Additional Information
1. About the LL 40GbE IP Core x
1.1. LL 40GbE IP Core Supported Features 1.2. IP Core Device Family and Speed Grade Support 1.3. IP Core Verification 1.4. Performance and Resource Utilization 1.5. Release Information
1.2. IP Core Device Family and Speed Grade Support x
1.2.1. LL 40GbE IP Core Device Family Support 1.2.2. LL 40GbE IP Core Device Speed Grade Support
1.3. IP Core Verification x
1.3.1. Simulation Environment 1.3.2. Compilation Checking 1.3.3. Hardware Testing
1.4. Performance and Resource Utilization x
1.4.1. Arria 10 Resource Utilization 1.4.2. Stratix V Resource Utilization
2. Getting Started x
2.1. Installation and Licensing for LL 40GbE IP Core for Stratix® V Devices 2.2. Installing and Licensing Intel® FPGA IP Cores 2.3. Specifying the IP Core Parameters and Options 2.4. IP Core Parameters 2.5. Files Generated for Stratix V Variations 2.6. Files Generated for Arria 10 Variations 2.7. Integrating Your IP Core in Your Design 2.8. IP Core Testbenches 2.9. Compiling the Full Design and Programming the FPGA 2.10. Initializing the IP Core
2.2. Installing and Licensing Intel® FPGA IP Cores x
2.2.1. Intel® FPGA IP Evaluation Mode
2.7. Integrating Your IP Core in Your Design x
2.7.1. Pin Assignments 2.7.2. External Transceiver Reconfiguration Controller Required in Stratix V Designs 2.7.3. Transceiver PLL Required in Arria 10 Designs 2.7.4. Handling Potential Jitter in Intel® Arria® 10 Devices 2.7.5. External Time-of-Day Module for Variations with 1588 PTP Feature 2.7.6. Clock Requirements for 40GBASE-KR4 Variations 2.7.7. External TX MAC PLL 2.7.8. Placement Settings for the LL 40GbE Core
2.8. IP Core Testbenches x
2.8.1. Testbench Behavior 2.8.2. Simulating the LL 40GbE IP Core With the Testbenches
2.8.2. Simulating the LL 40GbE IP Core With the Testbenches x
2.8.2.1. Generating the LL 40GbE Testbench 2.8.2.2. Optimizing the IP Core Simulation With the Testbenches 2.8.2.3. Optimization in the 40GBASE-KR4 Testbench 2.8.2.4. Simulating with the Modelsim Simulator 2.8.2.5. Simulating with the NCSim Simulator 2.8.2.6. Simulating with the VCS Simulator 2.8.2.7. Testbench Output Example
3. Functional Description x
3.1. High Level System Overview 3.2. LL 40GbE IP Core Functional Description 3.3. Signals 3.4. Software Interface: Registers 3.5. Ethernet Glossary
3.2. LL 40GbE IP Core Functional Description x
3.2.1. LL 40GbE IP Core TX Datapath 3.2.2. LL 40GbE IP Core TX Data Bus Interfaces 3.2.3. LL 40GbE IP Core RX Datapath 3.2.4. LL 40GbE IP Core RX Data Bus Interfaces 3.2.5. External Reconfiguration Controller 3.2.6. External Transceiver PLL 3.2.7. External TX MAC PLL 3.2.8. Congestion and Flow Control Using Pause Frames 3.2.9. Pause Control and Generation Interface 3.2.10. Pause Control Frame Filtering 3.2.11. Link Fault Signaling Interface 3.2.12. Statistics Counters Interface 3.2.13. 1588 Precision Time Protocol Interfaces 3.2.14. PHY Status Interface 3.2.15. Transceiver PHY Serial Data Interface 3.2.16. Low Latency 40GBASE-KR4 IP Core Variations 3.2.17. Control and Status Interface 3.2.18. Arria 10 Transceiver Reconfiguration Interface 3.2.19. Clocks 3.2.20. Resets
3.2.1. LL 40GbE IP Core TX Datapath x
3.2.1.1. Preamble, Start, and SFD Insertion 3.2.1.2. Address Insertion 3.2.1.3. Length/Type Field Processing 3.2.1.4. Frame Padding 3.2.1.5. Frame Check Sequence (CRC-32) Insertion 3.2.1.6. Inter-Packet Gap Generation and Insertion 3.2.1.7. Error Insertion Test and Debug Feature
3.2.2. LL 40GbE IP Core TX Data Bus Interfaces x
3.2.2.1. LL 40GbE IP Core User Interface Data Bus 3.2.2.2. LL 40GbE IP Core TX Data Bus with Adapters (Avalon-ST Interface) 3.2.2.3. LL 40GbE IP Core TX Data Bus Without Adapters (Custom Streaming Interface) 3.2.2.4. Bus Quantization Effects With Adapters 3.2.2.5. User Interface to Ethernet Transmission
3.2.2.5. User Interface to Ethernet Transmission x
3.2.2.5.1. Order of Transmission
3.2.3. LL 40GbE IP Core RX Datapath x
3.2.3.1. LL 40GbE IP Core RX Filtering 3.2.3.2. LL 40GbE IP Core Preamble Processing 3.2.3.3. IP Core Strict SFD Checking 3.2.3.4. LL 40GbE IP Core FCS (CRC-32) Removal 3.2.3.5. LL 40GbE IP Core CRC Checking 3.2.3.6. LL 40GbE IP Core Malformed Packet Handling 3.2.3.7. RX CRC Forwarding 3.2.3.8. Inter-Packet Gap 3.2.3.9. Pause Ignore 3.2.3.10. Control Frame Identification
3.2.4. LL 40GbE IP Core RX Data Bus Interfaces x
3.2.4.1. LL 40GbE IP Core User Interface Data Bus 3.2.4.2. LL 40GbE IP Core RX Data Bus with Adapters (Avalon-ST Interface) 3.2.4.3. LL 40GbE IP Core RX Data Bus Without Adapters (Custom Streaming Interface)
3.2.8. Congestion and Flow Control Using Pause Frames x
3.2.8.1. Conditions Triggering XOFF Frame Transmission 3.2.8.2. Conditions Triggering XON Frame Transmission
3.2.12. Statistics Counters Interface x
3.2.12.1. OctetOK Count Interface
3.2.13. 1588 Precision Time Protocol Interfaces x
3.2.13.1. Implementing a 1588 System That Includes a LL 40GbE Core 3.2.13.2. PTP Receive Functionality 3.2.13.3. PTP Transmit Functionality 3.2.13.4. External Time-of-Day Module for 1588 PTP Variations 3.2.13.5. PTP Timestamp and TOD Formats V2 Format V1 Format Intel 64-Bit TOD Format 3.2.13.6. 1588 PTP Interface Signals
3.3. Signals x
3.3.1. LL 40GbE IP Core Signals
3.4. Software Interface: Registers x
3.4.1. LL 40GbE IP Core Registers 3.4.2. LL 40GbE Hardware Design Example Registers
3.4.1. LL 40GbE IP Core Registers x
3.4.1.1. PHY Registers 3.4.1.2. Link Fault Signaling Registers 3.4.1.3. LL 40GBASE-KR4 Registers 3.4.1.4. LL 40GbE IP Core MAC Configuration Registers 3.4.1.5. Pause Registers 3.4.1.6. TX Statistics Registers 3.4.1.7. RX Statistics Registers 3.4.1.8. 1588 PTP Registers
3.4.2. LL 40GbE Hardware Design Example Registers x
3.4.2.1. Packet Client Registers
4. Debugging the Link x
4.1. Creating a Signal Tap Debug File to Match Your Design Hierarchy
A. Arria 10 10GBASE-KR Registers x
A.1. 10GBASE-KR PHY Register Definitions
B. Additional Information x
B.1. LL 40GbE IP Core User Guide Archives B.2. LL 40GbE IP Core User Guide Revision History
1. About the LL 40GbE IP Core
2. Getting Started
3. Functional Description
4. Debugging the Link
A. Arria 10 10GBASE-KR Registers
B. Additional Information

3.2.13.5. PTP Timestamp and TOD Formats

The LL 40GbE core supports a 96-bit timestamp (V2 format) or a 64-bit timestamp (correction-field format) in PTP packets. The 64-bit timestamp and TOD signals of the IP core are in an Intel-defined 64-bit format that is distinct from the V1 format, for improved efficiency in one-step processing correction mode. Therefore, if your system need not handle any packets in one-step processing correction mode, you should turn off the Enable 64b Time of Day Format parameter .

You control the format or formats the IP core supports with the Enable 64b Time of Day Format and Enable 96b Time of Day Format parameters . If you turn on Enable 96b Time of Day Format , your IP core can support two-step processing mode, one-step processing insertion mode, and one-step processing correction mode, and can support both V1 and V2 formats. You can turn on Enable 64b Time of Day Format and turn off Enable 96b Time of Day Format to support one-step processing correction mode more efficiently. However, if you do so, your IP core variation cannot support two-step processing mode and cannot support one-step processing insertion mode. If you turn on both of these parameters, the value you drive on the tx_estamp_ins_ctrl_timestamp_format or tx_etstamp_ins_ctrl_residence_time_calc_format signal determines the format the IP core supports for the current packet.

The IP core completes all internal processing in the V2 format. However, if you specify V1 format for a particular PTP packet in one-step insertion mode, the IP core inserts the appropriate V1-format timestamp in the outgoing packet on the Ethernet link.

V2 Format

The IP core maintains the time-of-day (TOD) in V2 format according to the IEEE specification:

  • Bits [95:48]: Seconds (48 bits).
  • Bits [47:16]: Nanoseconds (32 bits). This field overflows at 1 billion.
  • Bits [15:0]: Fractions of nanosecond (16 bits). This field is a true fraction; it overflows at 0xFFFF.

The IP core can receive time-of-day information from the TOD module in V2 format or in 64-bit TOD format, or both, depending on your settings for the Enable 64b Time of Day Format and Enable 96b Time of Day Format parameters .

V1 Format

V1 timestamp format is specified in the IEEE specification:

  • Bits [63:32]: Seconds (32 bits).
  • Bits [31:0]: Nanoseconds (32 bits). This field overflows at 1 billion.

Intel 64-Bit TOD Format

The Intel 64-bit TOD format is distinct from the V1 format and supports a longer time delay. It is intended for use in transparent clock systems, in which each node adds its own residence time to a running total latency through the system. This format matches the format of the correction field in the packet, as used in transparent clock mode.

  • Bits [63:16]: Nanoseconds (48 bits). This field can specify a value greater than 4 seconds.
  • Bits [15:0]: Fractions of nanosecond (16 bits). This field is a true fraction; it overflows at 0xFFFF.

The TOD module provides 64-bit TOD information to the IP core in this 64-bit TOD format. The expected format of all 64-bit input timestamp and TOD signals to the IP core is the Intel 64-bit TOD format. The format of all 64-bit output timestamp and TOD signals from the IP core is the Intel 64-bit TOD format. If you build your own TOD module that provides 64-bit TOD information to the IP core, you must ensure it provides TOD information in the Intel 64-bit TOD format.

Related Information
Level Two Title