Visible to Intel only — GUID: ndj1540386163093
Ixiasoft
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Stratix® 10 Devices
2. HDMI 2.1 Design Example (Support FRL = 1)
3. HDMI 2.0 Design Example
4. HDCP Over HDMI 2.0/2.1 Design Example
5. HDMI Stratix® 10 FPGA IP Design Example User Guide Archives
6. Document Revision History for the HDMI Stratix® 10 FPGA IP Design Example User Guide
2.1. HDMI 2.1 RX-TX Retransmit Design Block Diagram
2.2. Creating RX-Only or TX-Only Designs
2.3. Hardware and Software Requirements
2.4. Directory Structure
2.5. Design Components
2.6. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering
2.7. Design Software Flow
2.8. Running the Design in Different FRL Rates
2.9. Clocking Scheme
2.10. Interface Signals
2.11. Design RTL Parameters
2.12. Hardware Setup
2.13. Simulation Testbench
2.14. Design Limitations
2.15. Debugging Features
3.1. HDMI RX-TX Retransmit Design Block Diagram
3.2. Creating TX or RX Only Designs
3.3. Design Components
3.4. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering
3.5. Clocking Scheme
3.6. Interface Signals
3.7. Design RTL Parameters
3.8. Hardware Setup
3.9. Simulation Testbench
3.10. Upgrading Your Design
Visible to Intel only — GUID: ndj1540386163093
Ixiasoft
3.10. Upgrading Your Design
Design Example Variant | Ability to Upgrade to Quartus® Prime Pro Edition 24.1 |
---|---|
HDMI 2.0 Design Example | No |
For any non-compatible design examples, you need to do the following:
- Generate a new design example in the current Quartus® Prime Pro Edition software version using the same configurations of your existing design.
- Compare the whole design example directory with the design example generated using the previous Quartus® Prime Pro Edition software version. Port over the changes found.