Parallel Flash Loader Intel® FPGA IP User Guide

Download PDF
ID 683698
Date 7/23/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Parallel Flash Loader Intel® FPGA IP User Guide
1. Parallel Flash Loader Intel® FPGA IP User Guide x
1.1. Features 1.2. Device Support 1.3. Functional Description 1.4. Using the PFL IP Core 1.5. PFL IP Core In Embedded Systems 1.6. Third-party Programmer Support 1.7. Parameters 1.8. Signals 1.9. Specifications 1.10. Parallel Flash Loader Intel® FPGA IP User Guide Archives 1.11. Document Revision History for the Parallel Flash Loader Intel® FPGA IP User Guide
1.2. Device Support x
1.2.1. Supported Flash Memory Devices 1.2.2. Supported Schemes and Features
1.3. Functional Description x
1.3.1. Programming Flash Memory 1.3.2. Controlling Intel® FPGA Configuration from Flash Memory 1.3.3. Mapping PFL and Flash Address 1.3.4. Implementing Page in the Flash .pof 1.3.5. Using Enhanced Bitstream Compression and Decompression 1.3.6. Using Remote System Upgrade
1.3.1. Programming Flash Memory x
1.3.1.1. Programming CFI Flash 1.3.1.2. Programming Quad SPI Flash 1.3.1.3. Programming NAND Flash
1.3.4. Implementing Page in the Flash .pof x
1.3.4.1. Storing Option Bits
1.3.6. Using Remote System Upgrade x
1.3.6.1. Remote System Upgrade State Machine in the PFL IP Core 1.3.6.2. Implementing Remote System Upgrade with the PFL IP Core 1.3.6.3. User Watchdog Timer
1.4. Using the PFL IP Core x
1.4.1. Converting .sof Files to a .pof 1.4.2. Constraining PFL Timing 1.4.3. Simulating PFL Design 1.4.4. Programming Intel® CPLDs and Flash Memory Devices 1.4.5. Defining New CFI Flash Device 1.4.6. Programming Multiple Flash Memory Devices 1.4.7. Creating Jam Files for Intel® CPLDs and Flash Memory Device Programming
1.4.2. Constraining PFL Timing x
1.4.2.1. Constraining Clock Signal 1.4.2.2. Constraining Synchronous Input and Output Ports 1.4.2.3. Constraining Asynchronous Input and Output Ports, and Bidirectional Synchronous Ports 1.4.2.4. Summary of PFL Timing Constraints
1.4.3. Simulating PFL Design x
1.4.3.1. Creating a Test Bench File for PFL Simulation 1.4.3.2. Performing PFL Simulation in the ModelSim- Intel® FPGA Software 1.4.3.3. Performing PFL Simulation for FPGA Configuration
1.4.4. Programming Intel® CPLDs and Flash Memory Devices x
1.4.4.1. Programming Intel® CPLDs and Flash Memory Devices Separately
1.9. Specifications x
1.9.1. Configuration Time Calculation Examples
1. Parallel Flash Loader Intel® FPGA IP User Guide

1.3.1.3. Programming NAND Flash

You can use the JTAG interface in Intel® CPLDs to program the NAND flash memory device with the PFL IP core. The NAND flash memory device is a simpler device that has faster erase and write speed with higher memory density in comparison with the CFI flash.

You can use the JTAG interface in Intel® CPLDs to indirectly program the flash memory device. The CPLD JTAG block interfaces directly with the logic array in a special JTAG mode. This mode brings the JTAG chain through the logic array instead of the Intel® CPLD BSCs. The PFL IP core provides JTAG interface logic to convert the JTAG stream from the Intel® Quartus® Prime software and to program the NAND flash memory device that connects to the CPLD I/O pins.

Figure 5. Programming NAND Flash Memory Devices With the JTAG InterfaceFigure shows a CPLD functioning as a bridge to program the NAND flash memory device through the JTAG interface.
Level Two Title