eCPRI Intel® FPGA IP User Guide

Download PDF
ID 683685
Date 12/01/2024
Public
Document Table of Contents
Document Table of Contents x
1. About the eCPRI IP 2. Getting Started 3. eCPRI IP Parameters 4. Functional Description 5. Interfaces 6. eCPRI IP Registers 7. eCPRI Intel FPGA IP User Guide Archives 8. Document Revision History for the eCPRI Intel® FPGA IP User Guide
1. About the eCPRI IP x
1.1. eCPRI Intel® FPGA IP Features 1.2. eCPRI IP Device Family Support 1.3. eCPRI Intel® FPGA IP Device Speed Grade Support 1.4. eCPRI IP Resource Utilization 1.5. Intel® FPGA IP Core Verification 1.6. eCPRI IP Release Information
2. Getting Started x
2.1. Installing and Licensing the eCPRI IP 2.2. Specifying the eCPRI IP Parameters 2.3. eCPRI IP Generated File Structure 2.4. Simulating the eCPRI IP 2.5. Compiling the Full Design and Programming the FPGA
2.2. Specifying the eCPRI IP Parameters x
2.2.1. Reference and System PLL Clock for your IP Design
4. Functional Description x
4.1. High Level Data Path Flow 4.2. Operation of the eCPRI IP Blocks
4.1. High Level Data Path Flow x
4.1.1. Transmit TX Path 4.1.2. Receive RX Path 4.1.3. Supported Ethernet Variants
4.2. Operation of the eCPRI IP Blocks x
4.2.1. Packet Classifier 4.2.2. Ethernet Header Insertion/Removal 4.2.3. Concatenation/De-concatenation 4.2.4. Header Mapper/De-Mapper 4.2.5. eCPRI IWF Type 0 4.2.6. eCPRI Message 5 Packet Parser 4.2.7. Packet Queue 4.2.8. eCPRI Message Type 4.2.9. Error Handling 4.2.10. RX Throttling
4.2.8. eCPRI Message Type x
4.2.8.1. eCPRI Message Type 0- IQ Data Transfer 4.2.8.2. eCPRI Message Type 1- Bit Sequence Transfer 4.2.8.3. eCPRI Message Type 2- Real Time Control Data 4.2.8.4. eCPRI Message Type 3- Generic Data Transfer 4.2.8.5. eCPRI Message Type 4- Remote Memory Access 4.2.8.6. eCPRI Message Type 5- One-Way Delay Measurement 4.2.8.7. eCPRI Message Type 6- Remote Reset 4.2.8.8. eCPRI Message Type 7- Event Indication 4.2.8.9. eCPRI Message Type 64- 255 Vendor Specific
5. Interfaces x
5.1. eCPRI IP Clock Signals 5.2. Power, Reset, and Firewalls Signals 5.3. TX Time of Day Interface 5.4. RX Time of Day Interface 5.5. Interrupt 5.6. Configuration Avalon® Memory-Mapped Interface 5.7. Ethernet MAC Source Interface 5.8. Ethernet MAC Sink Interface 5.9. External ST Source Interface 5.10. External ST Sink Interface 5.11. eCPRI IP Source Interface 5.12. eCPRI IP Sink Interface 5.13. Miscellaneous Interface Signals 5.14. IWF Type 0 eCPRI Interface 5.15. IWF Type 0 CPRI MAC Interface
5.2. Power, Reset, and Firewalls Signals x
5.2.1. Reset Control and Initialization Flows
5.7. Ethernet MAC Source Interface x
5.7.1. E-tile Hard IP for Ethernet 1588 PTP Signals 5.7.2. 25G Ethernet MAC 1588 PTP Signals 5.7.3. 10G Ethernet MAC 1588 PTP Signals 5.7.4. F-Tile Ethernet Hard IP 1588 PTP Signals 5.7.5. Agilex 5 Device Ethernet Hard IP 1588 PTP Signals
5.14. IWF Type 0 eCPRI Interface x
5.14.1. IWF Source Interface 5.14.2. IWF Sink Interface
5.15. IWF Type 0 CPRI MAC Interface x
5.15.1. CPRI 32-bit IQ Data TX Interface 5.15.2. CPRI 64-bit IQ Data TX Interface 5.15.3. CPRI 32-bit Ctrl_AxC TX Interface 5.15.4. CPRI 64-bit Ctrl_AxC TX Interface 5.15.5. CPRI 32-bit Vendor Specific TX Interface 5.15.6. CPRI 64-bit Vendor Specific TX Interface 5.15.7. CPRI 32-bit Real-time Vendor Specific TX Interface 5.15.8. CPRI 64-bit Real-time Vendor Specific TX Interface 5.15.9. CPRI Gigabit Media Independent Interface (GMII) 5.15.10. CPRI IP L1 Control and Status Interface
1. About the eCPRI IP
2. Getting Started
3. eCPRI IP Parameters
4. Functional Description
5. Interfaces
6. eCPRI IP Registers
7. eCPRI Intel FPGA IP User Guide Archives
8. Document Revision History for the eCPRI Intel® FPGA IP User Guide

5.9. External ST Source Interface

Table 42.  Signals of the External ST Source InterfaceAll signals are synchronous to ext_sink_clk and only available when L2/L3 parser is on.
Signal Name Width (Bits) I/O Direction Description
ext_source_valid 1 Output Avalon® source valid from L2/L3 parser to external user logic.

This signal is synchronous to ext_sink_clk signal.

ext_source_data DATA_WIDTH 11 Output Avalon® source write data from L2/L3 parser to external user logic.
ext_source_sop 1 Output Avalon® source start of packet from L2/L3 parser to external user logic. Indicate the beginning of packet.
ext_source_eop 1 Output Avalon® source end of packet from L2/L3 parser to external user logic. Indicates the end of packet.
ext_source_empty LOG2(DATA_WIDTH11/8) Output Avalon® source empty from L2/L3 parser to external user logic. Indicates the number of symbols that are empty, that is, do not represent valid data.
ext_source_error 1 Output Avalon® source error from L2/L3 parser to external user logic. A bit mask to mark errors affecting the data being transferred in the current cycle.
ext_source_pkt_type 3 Output Indicate frame type of the packet output from L2/L3 parser to external user logic.
  • 000b: eCPRI
  • 001b: PTP
  • 010b: Misc

This signal is synchronous with ext_source_valid signal.

11 This is set to 64. This parameter is hidden from user and you can't change it.
Level Two Title