DisplayPort Intel® Cyclone 10 GX FPGA IP Design Example User Guide

Download PDF
ID 683603
Date 9/02/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide 2. Parallel Loopback Design Examples 3. DisplayPort Intel® Cyclone® 10 GX FPGA IP Design Example User Guide Archives 4. Revision History for DisplayPort Intel® Cyclone® 10 GX FPGA IP Design Example User Guide
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. Hardware and Software Requirements 1.3. Generating the Design 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. DisplayPort Intel® FPGA IP Design Example Parameters
1.5. Compiling and Testing the Design x
1.5.1. Regenerating ELF File
2. Parallel Loopback Design Examples x
2.1. Intel® Cyclone® 10 GX DisplayPort SST Parallel Loopback Design Features 2.2. Intel® Cyclone® 10 GX DisplayPort MST Parallel Loopback Design Features 2.3. Intel® Cyclone® 10 GX DisplayPort SST TX-only or RX-only Design Features 2.4. Enabling Adaptive Sync Support 2.5. Design Components 2.6. Clocking Scheme 2.7. Interface Signals and Parameter 2.8. Hardware Setup 2.9. Simulation Testbench 2.10. DisplayPort Transceiver Reconfiguration Flow 2.11. Transceiver Lane Configurations
2.3. Intel® Cyclone® 10 GX DisplayPort SST TX-only or RX-only Design Features x
2.3.1. Intel® Cyclone® 10 GX DisplayPort SST TX-only Design Features 2.3.2. Intel® Cyclone® 10 GX DisplayPort SST RX-only Design Features
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide
2. Parallel Loopback Design Examples
3. DisplayPort Intel® Cyclone® 10 GX FPGA IP Design Example User Guide Archives
4. Revision History for DisplayPort Intel® Cyclone® 10 GX FPGA IP Design Example User Guide

4. Revision History for DisplayPort Intel® Cyclone® 10 GX FPGA IP Design Example User Guide

Date Intel® Quartus® Prime Version Intel® FPGA IP Version Changes
2022.09.02 22.2 21.0.1
  • Updated DisplayPort Intel FPGA IP Design Example for Intel Cyclone 10 GX Devices table in DisplayPort Intel FPGA IP Design Example Parameters section to include DisplayPort SST TX-only and DisplayPort SST RX-only design examples.
  • Updated DisplayPort Intel FPGA IP Design Example for Intel Cyclone 10 GX Devices table in Parallel Loopback Design Examples section to include DisplayPort SST TX-only and DisplayPort SST RX-only design examples.
  • Added a new section, Intel Cyclone 10 GX DisplayPort SST TX-only or RX-only Design Features.
  • Corrected the Generating the Design Flow section. Replaced Intel® Arria® 10 with Intel® Cyclone® 10 GX.
  • Edited the Related Information of Compiling and Testing the Design section by supplying the correct URL to the Intel® Cyclone® 10 GX Devkit page.
2020.09.28 20.3 19.4.0
  • Updated and renamed the Configuring Single or Dual Lanes section to Transceiver Lane Configurations.
  • Added pin assignments for Bitec FMC revision 10 in the Transceiver Lane Configurations section.
  • Updated the pin assignments for Bitec FMC revision 8 or earlier, and revision 11 with transceiver Avalon® memory-mapped interface group information in the Transceiver Lane Configurations section.
2020.04.13 20.1 19.3.0
  • Updated the Bitec DisplayPort card revision and the IP version in the local parameter in the RTL file at <project directory>/rtl/c10_dp_demo.v and the software config.h file in the Compiling and Testing the Design section.
  • Updated the description for the fmca_la_tx_n_12 signal and added a new signal, fmca_la_tx_p_14 for DisplayPort FMC daughter card pins in the Interface Signals and Parameters section.
  • Replaced the description about the Parade Tech PS8460 Retimer signals with the FMC On-board Retimer Reconfiguration Interface signals in the Interface Signals and Parameters section.
2019.07.30 19.2 19.1.0
  • Added information about the DisplayPort MST parallel loopback with and without a PCR module design examples in the DisplayPort Intel® FPGA IP Design Example Quick Start Guide section.
  • Updated the files and folders in the Directory Structure section.
  • Added support for the Bitec DisplayPort FMC daughter card revision 11 in the Hardware and Software Requirements section.
  • Added information about the DisplayPort MST parallel loopback with and without a PCR module design examples in the Generating the Design, DisplayPort Intel® FPGA IP Design Example Parameters, and DisplayPort Intel® FPGA IP Design Example Detailed Description sections.
  • Updated the Regenerating ELF File section to include information about WSL and provided a link to the Nios II Software Developer Handbook.
  • Updated the Compiling and Testing the Design section to include information about the Bitec DisplayPort FMC daughter card revision 11, channel mapping, and clock controller setting.
  • Updated the Configuring Single or Dual Lanes section with information about the Bitec DisplayPort FMC daughter card revision 11.
2019.04.05 19.1 19.1
  • Removed the /altera_avalon_i2c file from the Directory Structure section. It is not added in the core folder.
  • Updated the Directory Structure section to add the Xcelium Parallel simulator files.
  • Added instructions to run simulation using the Xcelium Parallel simulator in the Simulating the Design section.
  • Edited the DisplayPort Design Example Supported EDA Simulators table in the Simulation Testbench section to include Xcelium Parallel simulator and the supported platforms.
  • Moved the .c and .h software files to a new folder in the Directory Structure section. These files are now in the dp_demo subfolder in version 19.1 of the DisplayPort Intel® FPGA IP.
  • Updated the Bitec DisplayPort FMC daughter card local parameter in the Compiling and Testing the Design section.
  • Edited the note about CRC calculation in the Simulation Testbench section. To ensure CRC is calculated, you must enable the Support CTS test automation parameter.
  • Updated the frequency rate for HBR quad symbols per clock to 67.5 for the RX and TX Transceiver Clockout descriptions in the Clocking Scheme section.
  • Added the Intel® Cyclone® 10 GX DisplayPort SST Parallel Loopback with Adaptive Sync Support section to provide guidelines to add the Adaptive Sync feature,
  • Added the Configuring Single or Dual Lanes section to provide guidelines to make the correct pin assignments for single and dual lanes.
2017.12.25 17.1.1 17.1.1 Initial release.
Level Two Title