E-Tile Hard IP Stratix® 10 Design Examples User Guide: Ethernet, CPRI PHY, and Dynamic Reconfiguration

Download PDF
ID 683578
Date 4/29/2024
Public
Document Table of Contents
Document Table of Contents x
1. About E-tile Hard IP Design Examples 2. E-Tile Hard IP for Ethernet Intel FPGA IP Design Example 3. E-tile CPRI PHY Intel® FPGA IP Design Example 4. E-Tile Dynamic Reconfiguration Design Example 5. E-tile Hard IP Stratix® 10 Design Examples User Guide Archives
2. E-Tile Hard IP for Ethernet Intel FPGA IP Design Example x
2.1. E-Tile Hard IP for Ethernet Intel FPGA IP Quick Start Guide 2.2. 10GE/25GE with Optional RS-FEC Design Examples 2.3. 100GE with Optional RS-FEC Design Example 2.4. Ethernet Toolkit Overview 2.5. Document Revision History for the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example
2.1. E-Tile Hard IP for Ethernet Intel FPGA IP Quick Start Guide x
2.1.1. Directory Structure 2.1.2. Generating the Design 2.1.3. Simulating the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example Testbench 2.1.4. Compiling the Compilation-Only Project 2.1.5. Compiling and Configuring the Design Example in Hardware 2.1.6. Testing the E-Tile Hard IP for Ethernet Intel FPGA IP Hardware Design Example
2.1.3. Simulating the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example Testbench x
2.1.3.1. Fast Sim Model for E-tile Ethernet IP for Intel Stratix 10 FPGA
2.1.6. Testing the E-Tile Hard IP for Ethernet Intel FPGA IP Hardware Design Example x
2.1.6.1. 10GE/25GE Design Example 2.1.6.2. 100GE MAC+PCS with Optional (528,514) RS-FEC or (544,514) RS-FEC and Adaptation Flow Hardware Design Example 2.1.6.3. 100GE PCS Only with Optional (528,514) RS-FEC or (544,514) RS-FEC, and Optional PTP Hardware Design Example
2.2. 10GE/25GE with Optional RS-FEC Design Examples x
2.2.1. Simulation Design Examples 2.2.2. Hardware Design Examples 2.2.3. 10GE/25GE Design Example Interface Signals 2.2.4. 10GE/25GE Design Examples Registers
2.2.1. Simulation Design Examples x
2.2.1.1. Non-PTP 10GE/25GE MAC+PCS with Optional RS-FEC Simulation Design Example 2.2.1.2. PTP 10GE/25GE MAC+PCS with Optional RS-FEC Simulation Design Example 2.2.1.3. 10GE/25GE PCS Only, OTN, or FlexE with Optional RS-FEC Simulation Design Example 2.2.1.4. 10GE/25GE Custom PCS with Optional RS-FEC Simulation Design Example
2.2.2. Hardware Design Examples x
2.2.2.1. 10GE/25GE MAC+PCS with Optional RS-FEC and PTP Hardware Design Example Components 2.2.2.2. 10GE/25GE PCS Only with Optional RS-FEC Hardware Design Example Components 2.2.2.3. 10GE/25GE Custom PCS with Optional RS-FEC Hardware Design Example
2.3. 100GE with Optional RS-FEC Design Example x
2.3.1. Simulation Design Examples 2.3.2. Hardware Design Examples 2.3.3. 100GE MAC+PCS with Optional RS-FEC Design Example Interface Signals 2.3.4. 100GE PCS with Optional RS-FEC Design Example Interface Signals 2.3.5. Multiple 25G Synchronous Ethernet Channels 2.3.6. 100GE MAC+PCS with Optional RS-FEC Design Example Registers 2.3.7. 100GE PCS with Optional RS-FEC Design Example Registers
2.3.1. Simulation Design Examples x
2.3.1.1. Non-PTP E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with Optional RS-FEC Simulation Design Example 2.3.1.2. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with Optional RS-FEC and PTP Simulation Design Example 2.3.1.3. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE PCS Only with Optional RS-FEC Simulation Design Example 2.3.1.4. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE OTN with Optional RS-FEC Simulation Design Example 2.3.1.5. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE FlexE with Optional RS-FEC Simulation Design Example
2.3.2. Hardware Design Examples x
2.3.2.1. 100GE MAC+PCS with Optional RS-FEC and PMA Adaptation Flow Hardware Design Example Components 2.3.2.2. 100GE MAC+PCS with Optional RS-FEC and PTP Hardware Design Example 2.3.2.3. 100GE PCS with Optional RS-FEC Hardware Design Example Components 2.3.2.4. Ethernet Adaptation Flow for 100G (CAUI-2) PAM4 <---> 100G (CAUI-4) NRZ Dynamic Reconfiguration Design Example
2.4. Ethernet Toolkit Overview x
2.4.1. Features
3. E-tile CPRI PHY Intel® FPGA IP Design Example x
3.1. E-tile CPRI PHY Intel® FPGA IP Quick Start Guide 3.2. E-tile CPRI PHY Design Example Description 3.3. Document Revision History for the E-tile CPRI PHY Intel® FPGA IP Design Example
3.1. E-tile CPRI PHY Intel® FPGA IP Quick Start Guide x
3.1.1. Hardware and Software Requirements 3.1.2. Generating the Design 3.1.3. Directory Structure 3.1.4. Simulating the Design Example Testbench 3.1.5. Compiling the Compilation-Only Project 3.1.6. Compiling and Configuring the Design Example in Hardware 3.1.7. Testing the E-tile CPRI PHY Intel® FPGA IP Hardware Design Example
3.2. E-tile CPRI PHY Design Example Description x
3.2.1. Features 3.2.2. Simulation Design Example 3.2.3. Hardware Design Example 3.2.4. Interface Signals 3.2.5. Design Example Register Map for Reconfiguration
4. E-Tile Dynamic Reconfiguration Design Example x
4.1. Quick Start Guide 4.2. 10G/25G Ethernet Dynamic Reconfiguration Design Examples 4.3. CPRI Dynamic Reconfiguration Design Examples 4.4. 25G Ethernet to CPRI Dynamic Reconfiguration Design Example 4.5. 100G Ethernet Dynamic Reconfiguration Design Example 4.6. Document Revision History for the E-Tile Dynamic Reconfiguration Design Example
4.1. Quick Start Guide x
4.1.1. Directory Structure 4.1.2. Generating the Design 4.1.3. Simulating the E-Tile Dynamic Reconfiguration Design Example Testbench 4.1.4. Compiling and Configuring the Design Example in Hardware 4.1.5. Testing the E-Tile Dynamic Reconfiguration Hardware Design Example
4.1.2. Generating the Design x
4.1.2.1. Design Example Parameters
4.1.3. Simulating the E-Tile Dynamic Reconfiguration Design Example Testbench x
4.1.3.1. Running the Simulation 4.1.3.2. Generating New HEX File Using Eclipse-based Ashling RiscFree IDE Tool 4.1.3.3. Performing the Link Initialization
4.1.5. Testing the E-Tile Dynamic Reconfiguration Hardware Design Example x
4.1.5.1. Running the Design Example in Hardware 4.1.5.2. Power Management Setting for Stratix 10 E-Tile TX Transceiver Signal Integrity Development Kit
4.2. 10G/25G Ethernet Dynamic Reconfiguration Design Examples x
4.2.1. Functional Description 4.2.2. Simulation Design Examples 4.2.3. Hardware Design Examples 4.2.4. 10GE/25GE Design Example Interface Signals 4.2.5. 10GE/25GE Design Examples Registers 4.2.6. Dynamic Reconfiguration Flow for 25GbE PTP FEC to 25GbE PTP Non-FEC
4.2.1. Functional Description x
4.2.1.1. Clocking Scheme
4.2.2. Simulation Design Examples x
4.2.2.1. 10GE/25GE MAC+PCS with RS-FEC and PTP Simulation Dynamic Reconfiguration Design Example Components 4.2.2.2. 10GE/25GE MAC+PCS with RS-FEC Simulation Dynamic Reconfiguration Design Example Components
4.2.3. Hardware Design Examples x
4.2.3.1. 10GE/25GE MAC+PCS with RS-FEC and PTP Hardware Dynamic Reconfiguration Design Example Components 4.2.3.2. 10GE/25GE MAC+PCS with RS-FEC Hardware Dynamic Reconfiguration Design Example Components
4.3. CPRI Dynamic Reconfiguration Design Examples x
4.3.1. Functional Description 4.3.2. Simulation Design Examples 4.3.3. Hardware Design Examples 4.3.4. CPRI Design Example Interface Signals 4.3.5. CPRI Design Example Registers 4.3.6. Dynamic Reconfiguration Flow for 24G CPRI FEC to 24G CPRI Non-FEC
4.3.1. Functional Description x
4.3.1.1. Clocking Scheme
4.3.2. Simulation Design Examples x
4.3.2.1. 24G CPRI PHY with RS-FEC Simulation Dynamic Reconfiguration Design Example Components 4.3.2.2. 9.8G CPRI PHY Simulation Dynamic Reconfiguration Design Example Components
4.3.3. Hardware Design Examples x
4.3.3.1. CPRI PHY with RS-FEC Hardware Dynamic Reconfiguration Design Example Components
4.4. 25G Ethernet to CPRI Dynamic Reconfiguration Design Example x
4.4.1. Functional Description 4.4.2. Simulation Design Examples 4.4.3. Hardware Design Examples 4.4.4. 25G Ethernet to CPRI Design Example Interface Signals 4.4.5. 25G Ethernet to CPRI Design Examples Registers 4.4.6. Dynamic Reconfiguration Flow for 25GbE PTP FEC to 24G CPRI FEC
4.4.1. Functional Description x
4.4.1.1. Clocking Scheme 4.4.1.2. Reset
4.4.2. Simulation Design Examples x
4.4.2.1. 25GE MAC+PCS with RS-FEC and PTP to CPRI Simulation Dynamic Reconfiguration Design Example Components
4.4.3. Hardware Design Examples x
4.4.3.1. 25GE MAC+PCS with RS-FEC and PTP to CPRI Hardware Dynamic Reconfiguration Design Example Components
4.5. 100G Ethernet Dynamic Reconfiguration Design Example x
4.5.1. Functional Description 4.5.2. Testing the 100G Ethernet Dynamic Reconfiguration Hardware Design Example 4.5.3. Simulation Design Examples 4.5.4. 100GE DR Hardware Design Examples 4.5.5. 100G Ethernet Dynamic Reconfiguration Design Example Interface Signals 4.5.6. 100G Ethernet Dynamic Reconfiguration Examples Registers 4.5.7. Steps to Enable FEC 4.5.8. Steps to Disable FEC
4.5.2. Testing the 100G Ethernet Dynamic Reconfiguration Hardware Design Example x
4.5.2.1. Dynamic Reconfiguration Flow in 100G Ethernet Dynamic Reconfiguration Example Design
4.5.3. Simulation Design Examples x
4.5.3.1. 100GE MAC+PCS with Optional RS-FEC Dynamic Reconfiguration Simulation Design Example 4.5.3.2. Simulating the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example Testbench
4.5.4. 100GE DR Hardware Design Examples x
4.5.4.1. 100GE MAC+PCS with Optional RS-FEC Dynamic Reconfiguration Hardware Design Example Components
4.5.7. Steps to Enable FEC x
4.5.7.1. Configuring for 100G NRZ with RSFEC [KR-FEC (528,514)] 4.5.7.2. Configuring for 100G NRZ with RSFEC [KP-FEC (544,514)] 4.5.7.3. Configuring for 100G PAM4 with RSFEC [KP-FEC (544,514)]
1. About E-tile Hard IP Design Examples
2. E-Tile Hard IP for Ethernet Intel FPGA IP Design Example
3. E-tile CPRI PHY Intel® FPGA IP Design Example
4. E-Tile Dynamic Reconfiguration Design Example
5. E-tile Hard IP Stratix® 10 Design Examples User Guide Archives

2.5. Document Revision History for the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example

Document Version Quartus® Prime Version IP Version Changes
2023.05.26 23.1 24.0.0
  • Updated the Fast Sim Model is supported in variants without PTP in Fast Sim Model for E-tile Ethernet IP for Intel Stratix 10 FPGA.
  • Updated Programming Intel FPGA Devices link in Compiling and Configuring the Design Example in Hardware.
  • Updated step 5 command start_pma_init_adaptation_ex(1)/start_pma_02_init_adaptation_ex(2) in 100GE MAC+PCS with Optional (528,514) RS-FEC or (544,514) RS-FEC and Adaptation Flow Hardware Design Example.
  • Added steps to run simulation with the IEEE Ethernet standard specified interval in the following chapters:
    • 100GE MAC+PCS with Optional RS-FEC Dynamic Reconfiguration Simulation Design Example
    • Non-PTP E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with Optional RS-FEC Simulation Design Example
    • E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with Optional RS-FEC and PTP Simulation Design Example
    • Non-PTP 10GE/25GE MAC+PCS with Optional RS-FEC Simulation Design Example
2023.01.20 22.4 23.0.0
  • Added a new topic: Fast Sim Model for E-tile Ethernet IP for Intel Stratix 10 FPGA.
  • Fixed the broken links in Compiling and Configuring the Design Example in Hardware
2022.09.26 22.3 22.0.0
  • Added the Ethernet Adaptation Flow for 100G (CAUI-2) PAM4 <---> 100G (CAUI-4) NRZ Dynamic Reconfiguration Design Example section
  • Added the Additional Reconfig Options in Quartus® Prime Pro Edition software v22.2 for Stratix® 10 E-tile section
2021.11.22 21.3 20.2.1
  • Added support for QuestaSim* simulator.
  • Removed support for NCSim simulator.
2021.04.28 20.4 20.2.0 Added a new section:Ethernet Toolkit Overview.
2020.12.14 20.2 20.2.0
  • Added a command to select the JTAG master in the following sections::
    • 100GE MAC+PCS with Optional (528,514) RS-FEC or (544,514) RS-FEC and Adaptation Flow Hardware Design Example
    • 100GE PCS Only with Optional (528,514) RS-FEC or (544,514) RS-FEC, and Optional PTP Hardware Design Example
  • Added EnhancedPTPAccuracy command setting and its description in 10GE/25GE Design Example section.
2020.06.29 20.2 20.2.0
  • Revised Y1 description in the Compiling and Configuring the Design Example in Hardware section.
2019.12.23 19.4 19.4.0
  • Updated description of PMA adaptation setting in the Generating the Design section.
  • Added Asynchronous clock support for the 100GE MAC+PCS with (528,514) RS-FEC and PTP variant.
  • Restructured topics to improve the content flow.
2019.09.30 19.3 19.3.0
  • Updated the List of Supported Design Example Variants table in E-tile Hard IP for Ethernet Intel FPGA IP Quick Start Guide:
    • Added support for Single or multi channels custom PCS with optional RS-FEC for 10GE variant.
    • Removed Asynchronous clock support from the 100GE MAC+PCS with (528,514) RS-FEC and PTP variant
    • Added support for 100GE MAC+PCS with (544,514) RS-REC variant
  • Updated Generated the Design section:
    • Replaced external loopback with external link partner connection.
    • Added Stratix 10 TX Transceiver Signal Integrity Development Kit-1ST280EY2F55E2VGSI and Stratix 10 TX Transceiver Signal Integrity Development Kit-1ST280EY2F55E2VG under the Target Development Kit board selection.
  • Added a note to clarify run_vcs.sh and run_vcsmx.sh usage in the Steps to Simulate the Testbench table.
  • Updated the List of Supported Design Example Variants for 10G/25GE table in 10GE/25GE with Optional RS-FEC Design Examples.
  • Updated register name Source address upper, 16 bits in the Packet Client Register table for all variants.
2019.05.17 19.1 19.1
  • Renamed the document as E-tile Hard IP Stratix® 10 Design Examples User Guide.
  • Added 10GE/25GE custom PCS with optional RS-FEC simulation, compilation-only project, and hardware design examples.
  • Added E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with optional RS-FEC and PTP simulation, compilation-only project, and hardware design examples.
  • Updated the Testing the E-Tile Hard IP for Ethernet Intel FPGA IP Hardware Design Example topic:
    • Added a new subtopic: 10GE/25GE Custom PCS with Optional RS-FEC Hardware Design Example.
    • Updated the 10GE/25GE MAC+PCS with Optional RS-FEC and Optional PTP Hardware Design Example and 10GE/25GE PCS Only with Optional RS-FEC Hardware Design Example subtopics.
    • Updated the following commands in the 100GE MAC+PCS with Optional (528,514) RS-FEC and PMA Calibration Hardware Design Example and 100GE MAC+PCS with Optional (544,514) RS-FEC and PMA Calibration Hardware Design Example topics:
      • start_pma_init_adaptation
      • start_pma_anlg_rst03
      • init_adaptation_16_NoPrbsNoLdEL03
      • chk_init_adaptation_status
      • chk_init_adaptation_status_02
    • Updated Figure: In-System Sources and Probes Editor in the following topics:
      • 10GE/25GE MAC+PCS with Optional RS-FEC and Optional PTP Hardware Design Example
      • 10GE/25GE PCS Only with Optional RS-FEC Hardware Design Example
      • 10GE/25GE Custom PCS with Optional RS-FEC Hardware Design Example
  • Updated Table: List of Supported Design Example Variants.
  • Updated Table: Packet Generator and Checker Registers of the 100GE PCS with Optional RS-FEC Design Example Registers topic to update the register names for address 0xF000 and 0xF001.
  • Updated the following Figures:
    • Simulation Block Diagram for Non-PTP E-Tile Hard IP for Ethernet Intel FPGA IP 10GE/25GE MAC+PCS with Optional RS-FEC Design Example.
    • Simulation Block Diagram for E-Tile Hard IP for Ethernet Intel FPGA IP 10GE/25GE with Optional RS-FEC and PTP Design Example.
    • Simulation Block Diagram for E-Tile Hard IP for Ethernet Intel FPGA IP 10GE/25GE with Optional RS-FEC and PTP Design Example.
  • Updated the 10GE/25GE with Optional RS-FEC Design Example chapter:
    • Updated Table: Supported Design Example Variants for 10GE/25GE.
    • Updated the following simulation design example topics:
      • Non-PTP 10GE/25GE MAC+PCS with Optional RS-FEC Simulation Design Example
      • 10GE/25GE MAC+PCS with Optional RS-FEC and PTP Simulation Design Example
      • 10GE/25GE PCS Only, OTN, or FlexE with Optional RS-FEC Simulation Design Example
      • 10GE/25GE Custom PCS with Optional RS-FEC Simulation Design Example
    • Added new Table: Packet Generator Registers.
  • Updated the 100GE with Optional RS-FEC Design Example chapter:
    • Updated the following simulation design example topics:
      • Non-PTP E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with Optional RS-FEC Simulation Design Example.
      • E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with Optional RS-FEC and PTP Simulation Design Example
      • E-Tile Hard IP for Ethernet Intel FPGA IP 100GE PCS Only with Optional RS-FEC Simulation Design Example
      • E-Tile Hard IP for Ethernet Intel FPGA IP 100GE OTN with Optional RS-FEC Simulation Design Example
      • E-Tile Hard IP for Ethernet Intel FPGA IP 100GE FlexE with Optional RS-FEC Simulation Design Example
    • Updated the following Figures:
      • Simulation Block Diagram for E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with Optional RS-FEC Design Example.
      • Simulation Block Diagram for E-Tile Hard IP for Ethernet Intel FPGA IP 100GE OTN Design Example.
  • Made editorial updates throughout the document.
2019.02.14 18.1.1 18.1.1 Updated Table: Steps to Simulate the Testbench to include instruction for Xcelium simulator.
2019.01.04 18.1.1 18.1.1
  • Added information for the following design examples:
    • 10GE/25GE PCS Only, OTN, and FlexE RSFEC simulation and compilation-only project design examples.
    • 10GE/25GE PCS Only hardware design example.
    • Multi channel 10GE/25GE MAC + PCS with optional RSFEC and PTP simulation, compilation-only project, and hardware design examples.
    • 100GE MAC + PCS with optional RSFEC(544,514) simulation, compilation-only project, and hardware design examples.
    • 100GE PCS Only with optional RSFEC(528,514) and RSFEC(544,514) simulation, compilation-only, and hardware design examples.
  • Updated steps to test 10GE/25GE MAC + PCS with optional RSFEC and optional PTP and 100GE MAC+PCS with optional RSFEC and PMA calibration hardware design examples.
  • Updated result log for 10GE/25GE MAC + PCS with optional RSFEC and optional PTP and 100GE MAC+PCS with optional RSFEC and PMA calibration hardware design examples.
  • Updated simulation and hardware design example block diagram for 10GE/25GE MAC + PCS with optional RSFEC and non-PTP 10GE/25GE MAC + PCS with optional RSFEC variants.
  • Updated register map for 10GE/25GE and 100GE design examples.
2018.08.10 18.0 18.0
Added a note to clarify that the E-Tile Hard IP for Ethernet Intel FPGA IP provides preliminary support for the OTN feature in the following sections:
  • Quick Start Guide
  • 100GE with Optional RSFEC Design Example
  • 100GE OTN Simulation Design Example
2018.07.19 18.0 18.0 Initial release.
Level Two Title