E-Tile Hard IP Stratix® 10 Design Examples User Guide: Ethernet, CPRI PHY, and Dynamic Reconfiguration

Download PDF
ID 683578
Date 4/29/2024
Public
Document Table of Contents
Document Table of Contents x
1. About E-tile Hard IP Design Examples 2. E-Tile Hard IP for Ethernet Intel FPGA IP Design Example 3. E-tile CPRI PHY Intel® FPGA IP Design Example 4. E-Tile Dynamic Reconfiguration Design Example 5. E-tile Hard IP Stratix® 10 Design Examples User Guide Archives
2. E-Tile Hard IP for Ethernet Intel FPGA IP Design Example x
2.1. E-Tile Hard IP for Ethernet Intel FPGA IP Quick Start Guide 2.2. 10GE/25GE with Optional RS-FEC Design Examples 2.3. 100GE with Optional RS-FEC Design Example 2.4. Ethernet Toolkit Overview 2.5. Document Revision History for the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example
2.1. E-Tile Hard IP for Ethernet Intel FPGA IP Quick Start Guide x
2.1.1. Directory Structure 2.1.2. Generating the Design 2.1.3. Simulating the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example Testbench 2.1.4. Compiling the Compilation-Only Project 2.1.5. Compiling and Configuring the Design Example in Hardware 2.1.6. Testing the E-Tile Hard IP for Ethernet Intel FPGA IP Hardware Design Example
2.1.3. Simulating the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example Testbench x
2.1.3.1. Fast Sim Model for E-tile Ethernet IP for Intel Stratix 10 FPGA
2.1.6. Testing the E-Tile Hard IP for Ethernet Intel FPGA IP Hardware Design Example x
2.1.6.1. 10GE/25GE Design Example 2.1.6.2. 100GE MAC+PCS with Optional (528,514) RS-FEC or (544,514) RS-FEC and Adaptation Flow Hardware Design Example 2.1.6.3. 100GE PCS Only with Optional (528,514) RS-FEC or (544,514) RS-FEC, and Optional PTP Hardware Design Example
2.2. 10GE/25GE with Optional RS-FEC Design Examples x
2.2.1. Simulation Design Examples 2.2.2. Hardware Design Examples 2.2.3. 10GE/25GE Design Example Interface Signals 2.2.4. 10GE/25GE Design Examples Registers
2.2.1. Simulation Design Examples x
2.2.1.1. Non-PTP 10GE/25GE MAC+PCS with Optional RS-FEC Simulation Design Example 2.2.1.2. PTP 10GE/25GE MAC+PCS with Optional RS-FEC Simulation Design Example 2.2.1.3. 10GE/25GE PCS Only, OTN, or FlexE with Optional RS-FEC Simulation Design Example 2.2.1.4. 10GE/25GE Custom PCS with Optional RS-FEC Simulation Design Example
2.2.2. Hardware Design Examples x
2.2.2.1. 10GE/25GE MAC+PCS with Optional RS-FEC and PTP Hardware Design Example Components 2.2.2.2. 10GE/25GE PCS Only with Optional RS-FEC Hardware Design Example Components 2.2.2.3. 10GE/25GE Custom PCS with Optional RS-FEC Hardware Design Example
2.3. 100GE with Optional RS-FEC Design Example x
2.3.1. Simulation Design Examples 2.3.2. Hardware Design Examples 2.3.3. 100GE MAC+PCS with Optional RS-FEC Design Example Interface Signals 2.3.4. 100GE PCS with Optional RS-FEC Design Example Interface Signals 2.3.5. Multiple 25G Synchronous Ethernet Channels 2.3.6. 100GE MAC+PCS with Optional RS-FEC Design Example Registers 2.3.7. 100GE PCS with Optional RS-FEC Design Example Registers
2.3.1. Simulation Design Examples x
2.3.1.1. Non-PTP E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with Optional RS-FEC Simulation Design Example 2.3.1.2. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with Optional RS-FEC and PTP Simulation Design Example 2.3.1.3. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE PCS Only with Optional RS-FEC Simulation Design Example 2.3.1.4. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE OTN with Optional RS-FEC Simulation Design Example 2.3.1.5. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE FlexE with Optional RS-FEC Simulation Design Example
2.3.2. Hardware Design Examples x
2.3.2.1. 100GE MAC+PCS with Optional RS-FEC and PMA Adaptation Flow Hardware Design Example Components 2.3.2.2. 100GE MAC+PCS with Optional RS-FEC and PTP Hardware Design Example 2.3.2.3. 100GE PCS with Optional RS-FEC Hardware Design Example Components 2.3.2.4. Ethernet Adaptation Flow for 100G (CAUI-2) PAM4 <---> 100G (CAUI-4) NRZ Dynamic Reconfiguration Design Example
2.4. Ethernet Toolkit Overview x
2.4.1. Features
3. E-tile CPRI PHY Intel® FPGA IP Design Example x
3.1. E-tile CPRI PHY Intel® FPGA IP Quick Start Guide 3.2. E-tile CPRI PHY Design Example Description 3.3. Document Revision History for the E-tile CPRI PHY Intel® FPGA IP Design Example
3.1. E-tile CPRI PHY Intel® FPGA IP Quick Start Guide x
3.1.1. Hardware and Software Requirements 3.1.2. Generating the Design 3.1.3. Directory Structure 3.1.4. Simulating the Design Example Testbench 3.1.5. Compiling the Compilation-Only Project 3.1.6. Compiling and Configuring the Design Example in Hardware 3.1.7. Testing the E-tile CPRI PHY Intel® FPGA IP Hardware Design Example
3.2. E-tile CPRI PHY Design Example Description x
3.2.1. Features 3.2.2. Simulation Design Example 3.2.3. Hardware Design Example 3.2.4. Interface Signals 3.2.5. Design Example Register Map for Reconfiguration
4. E-Tile Dynamic Reconfiguration Design Example x
4.1. Quick Start Guide 4.2. 10G/25G Ethernet Dynamic Reconfiguration Design Examples 4.3. CPRI Dynamic Reconfiguration Design Examples 4.4. 25G Ethernet to CPRI Dynamic Reconfiguration Design Example 4.5. 100G Ethernet Dynamic Reconfiguration Design Example 4.6. Document Revision History for the E-Tile Dynamic Reconfiguration Design Example
4.1. Quick Start Guide x
4.1.1. Directory Structure 4.1.2. Generating the Design 4.1.3. Simulating the E-Tile Dynamic Reconfiguration Design Example Testbench 4.1.4. Compiling and Configuring the Design Example in Hardware 4.1.5. Testing the E-Tile Dynamic Reconfiguration Hardware Design Example
4.1.2. Generating the Design x
4.1.2.1. Design Example Parameters
4.1.3. Simulating the E-Tile Dynamic Reconfiguration Design Example Testbench x
4.1.3.1. Running the Simulation 4.1.3.2. Generating New HEX File Using Eclipse-based Ashling RiscFree IDE Tool 4.1.3.3. Performing the Link Initialization
4.1.5. Testing the E-Tile Dynamic Reconfiguration Hardware Design Example x
4.1.5.1. Running the Design Example in Hardware 4.1.5.2. Power Management Setting for Stratix 10 E-Tile TX Transceiver Signal Integrity Development Kit
4.2. 10G/25G Ethernet Dynamic Reconfiguration Design Examples x
4.2.1. Functional Description 4.2.2. Simulation Design Examples 4.2.3. Hardware Design Examples 4.2.4. 10GE/25GE Design Example Interface Signals 4.2.5. 10GE/25GE Design Examples Registers 4.2.6. Dynamic Reconfiguration Flow for 25GbE PTP FEC to 25GbE PTP Non-FEC
4.2.1. Functional Description x
4.2.1.1. Clocking Scheme
4.2.2. Simulation Design Examples x
4.2.2.1. 10GE/25GE MAC+PCS with RS-FEC and PTP Simulation Dynamic Reconfiguration Design Example Components 4.2.2.2. 10GE/25GE MAC+PCS with RS-FEC Simulation Dynamic Reconfiguration Design Example Components
4.2.3. Hardware Design Examples x
4.2.3.1. 10GE/25GE MAC+PCS with RS-FEC and PTP Hardware Dynamic Reconfiguration Design Example Components 4.2.3.2. 10GE/25GE MAC+PCS with RS-FEC Hardware Dynamic Reconfiguration Design Example Components
4.3. CPRI Dynamic Reconfiguration Design Examples x
4.3.1. Functional Description 4.3.2. Simulation Design Examples 4.3.3. Hardware Design Examples 4.3.4. CPRI Design Example Interface Signals 4.3.5. CPRI Design Example Registers 4.3.6. Dynamic Reconfiguration Flow for 24G CPRI FEC to 24G CPRI Non-FEC
4.3.1. Functional Description x
4.3.1.1. Clocking Scheme
4.3.2. Simulation Design Examples x
4.3.2.1. 24G CPRI PHY with RS-FEC Simulation Dynamic Reconfiguration Design Example Components 4.3.2.2. 9.8G CPRI PHY Simulation Dynamic Reconfiguration Design Example Components
4.3.3. Hardware Design Examples x
4.3.3.1. CPRI PHY with RS-FEC Hardware Dynamic Reconfiguration Design Example Components
4.4. 25G Ethernet to CPRI Dynamic Reconfiguration Design Example x
4.4.1. Functional Description 4.4.2. Simulation Design Examples 4.4.3. Hardware Design Examples 4.4.4. 25G Ethernet to CPRI Design Example Interface Signals 4.4.5. 25G Ethernet to CPRI Design Examples Registers 4.4.6. Dynamic Reconfiguration Flow for 25GbE PTP FEC to 24G CPRI FEC
4.4.1. Functional Description x
4.4.1.1. Clocking Scheme 4.4.1.2. Reset
4.4.2. Simulation Design Examples x
4.4.2.1. 25GE MAC+PCS with RS-FEC and PTP to CPRI Simulation Dynamic Reconfiguration Design Example Components
4.4.3. Hardware Design Examples x
4.4.3.1. 25GE MAC+PCS with RS-FEC and PTP to CPRI Hardware Dynamic Reconfiguration Design Example Components
4.5. 100G Ethernet Dynamic Reconfiguration Design Example x
4.5.1. Functional Description 4.5.2. Testing the 100G Ethernet Dynamic Reconfiguration Hardware Design Example 4.5.3. Simulation Design Examples 4.5.4. 100GE DR Hardware Design Examples 4.5.5. 100G Ethernet Dynamic Reconfiguration Design Example Interface Signals 4.5.6. 100G Ethernet Dynamic Reconfiguration Examples Registers 4.5.7. Steps to Enable FEC 4.5.8. Steps to Disable FEC
4.5.2. Testing the 100G Ethernet Dynamic Reconfiguration Hardware Design Example x
4.5.2.1. Dynamic Reconfiguration Flow in 100G Ethernet Dynamic Reconfiguration Example Design
4.5.3. Simulation Design Examples x
4.5.3.1. 100GE MAC+PCS with Optional RS-FEC Dynamic Reconfiguration Simulation Design Example 4.5.3.2. Simulating the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example Testbench
4.5.4. 100GE DR Hardware Design Examples x
4.5.4.1. 100GE MAC+PCS with Optional RS-FEC Dynamic Reconfiguration Hardware Design Example Components
4.5.7. Steps to Enable FEC x
4.5.7.1. Configuring for 100G NRZ with RSFEC [KR-FEC (528,514)] 4.5.7.2. Configuring for 100G NRZ with RSFEC [KP-FEC (544,514)] 4.5.7.3. Configuring for 100G PAM4 with RSFEC [KP-FEC (544,514)]
1. About E-tile Hard IP Design Examples
2. E-Tile Hard IP for Ethernet Intel FPGA IP Design Example
3. E-tile CPRI PHY Intel® FPGA IP Design Example
4. E-Tile Dynamic Reconfiguration Design Example
5. E-tile Hard IP Stratix® 10 Design Examples User Guide Archives

2.2.2.1. 10GE/25GE MAC+PCS with Optional RS-FEC and PTP Hardware Design Example Components

Figure 10. 10GE/25GE MAC+PCS with Optional RS-FEC and PTP Hardware Design Example High Level Block Diagram
The E-Tile Hard IP for Ethernet Intel FPGA IP hardware design example includes the following components:
  • E-Tile Hard IP for Ethernet Intel FPGA IP core.
  • Client logic that coordinates the programming of the IP core and packet generation.
  • Time-of-day (ToD) module to provide a continuous flow of current time-of-day information to the IP core.
  • PIO block to store RX and TX PTP timestamp for accuracy calculation and to send PTP 2-step timestamp request.
  • Avalon® memory-mapped interface address decoder to decode reconfiguration address space for MAC, transceiver, and RS-FEC modules during reconfiguration accesses.
  • JTAG controller that communicates with the System Console. You communicate with the client logic through the System Console.

The following sample output illustrates a successful hardware test run for a 25GE, MAC+PCS, non-PTP IP core variation. The test results are located at <design_example_dir>/hardware_test_design/hwtest_sl/c3_elane_xcvr_loopback_test.log or <design_example_dir>/hardware_test_design/hwtest_sl/c3_elane_traffic_basic_test.log.

Result from c3_elane_xcvr_loopback_test.log file: 
Info: Set JTAG Master Service Path


Info: Opened JTAG Master Service

	Test Start time is: 13:08:58
	Test Start date is: 03/12/2019

	Successfully Write XCVR Channel 0, CSR Register offset = 0x84, data = 0x0 
	Successfully Write XCVR Channel 0, CSR Register offset = 0x85, data = 0x0
.
.
.
	Successfully Read  XCVR  Channel 0, CSR Register offset = 0x89, data = 0x0 
Info: ELANE Channel 0 Internal Loopback initialAdaptation Status
	Successfully Write XCVR Channel 0, CSR Register offset = 0x84, data = 0x0 
	Successfully Write XCVR Channel 0, CSR Register offset = 0x85, data = 0xb 
.
.
.
	Successfully Read  XCVR  Channel 0, CSR Register offset = 0x89, data = 0x0 
Info: initialAdaptation is done successfully on channel 0
	Successfully Write XCVR Channel 0, CSR Register offset = 0x84, data = 0x0 
	Successfully Write XCVR Channel 0, CSR Register offset = 0x85, data = 0x8f 
.
.
.
	Successfully Read  XCVR  Channel 0, CSR Register offset = 0x89, data = 0x0 
	Successfully Write EHIPLANE Channel 0, User Register phy_ehip_csr_soft_reset               , offset = 0x310, data = 0x0 
	Successfully Write EHIPLANE Channel 0, User Register phy_ehip_csr_soft_reset               , offset = 0x310, data = 0x1 
.
.
.
	Successfully Read  EHIPLANE Channel 0, User Register phy_ehip_csr_soft_reset               , offset = 0x310, data = 0x0 

	C3 ELANE Channel 0 System Reset is successfully 

	Test End time is: 13:09:02
	Test End date is: 03/12/2019

Info: Closed JTAG Master Service



Info: Test <c3_elane_xcvr_loopback_test> Passed
Result from c3_elane_traffic_basic_test.log file: 
Info: Set JTAG Master Service Path


Info: Opened JTAG Master Service

	Test Start time is: 13:09:02
	Test Start date is: 03/12/2019


Info: Read all ELANE CSR registers

	Successfully Read  EHIPLANE Channel 0, User Register phy_revid                              , offset = 0x300, data = 0x11112015 
	Successfully Read  EHIPLANE Channel 0, User Register phy_scratch                           , offset = 0x301, data = 0x0 
.
.
.
	Successfully Read  EHIPLANE Channel 0, User Register phy_ehip_csr_soft_reset               , offset = 0x310, data = 0x0 

	C3 ELANE Channel 0 System Reset is successfully 

	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_end_addr_start_addr	  , offset = 0x8, data = 0x25800040 
	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_tx_num                 , offset = 0x9, data = 0xa 

Info: Stopping the traffic generator

	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_tx_ctrl                , offset = 0x10, data = 0x87 

Info: clearing the traffic generator statistics

	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_clear_dropped_counter  , offset = 0x7, data = 0x3 
	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_clear_dropped_counter  , offset = 0x7, data = 0x0 

Info: clearing the statistics

	Successfully Write EHIPLANE Channel 0, User Register cntr_tx_config                        , offset = 0x845, data = 0x1 
	Successfully Write EHIPLANE Channel 0, User Register cntr_rx_config                        , offset = 0x945, data = 0x1 

Info: Enabling the statistics

	Successfully Write EHIPLANE Channel 0, User Register cntr_tx_config                        , offset = 0x845, data = 0x0 
	Successfully Write EHIPLANE Channel 0, User Register cntr_rx_config                        , offset = 0x945, data = 0x0 

Info: Starting the traffic generator

	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_tx_ctrl                , offset = 0x10, data = 0x85 
	Successfully Read  EHIPLANE Channel 0, User Register cntr_tx_fragments_lo                  , offset = 0x800, data = 0x0 

Info: Stopping the traffic generator

	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_tx_ctrl                , offset = 0x10, data = 0x87 
	Successfully Read  EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_tx_ctrl                , offset = 0x10, data = 0x87 
.
.
.
	Successfully Read  EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_rx_pkt_cnt             , offset = 0x5, data = 0x463f3f 

Info: Channel 0 test is completed 

	Successfully Read  RSFEC Register rsfec_top_rx_cfg                     , offset = 0x14, data = 0x1 
	Successfully Read  RSFEC Register arbiter_base_cfg                      , offset = 0x0, data = 0x1 
.
.
.
	Successfully Read  RSFEC Register rsfec_top_tx_cfg                     , offset = 0x10, data = 0x6661 

	Test End time is: 13:09:13
	Test End date is: 03/12/2019

Info: Closed JTAG Master Service



Info: Test <c3_elane_traffic_basic_test> Passed
The following sample output illustrate a successful hardware test run for a 25GE, MAC+PCS, with PTP IP core variation. The test result is located at <design_example_dir>/hardware_test_design/hwtest_sl/c3_elane_ptp_traffic_basic_test.log. 
Info: Set JTAG Master Service Path


Info: Opened JTAG Master Service

	Test Start time is: 17:50:05
	Test Start date is: 03/12/2019

	Successfully Write EHIPLANE Channel 0, User Register phy_ehip_csr_soft_reset               , offset = 0x310, data = 0x0 
	Successfully Write EHIPLANE Channel 0, User Register phy_ehip_csr_soft_reset               , offset = 0x310, data = 0x1 
.
.
.
	Successfully Read  EHIPLANE Channel 0, User Register phy_ehip_csr_soft_reset               , offset = 0x310, data = 0x0 

	C3 ELANE Channel 0 System Reset is successfully 

Info: Stopping the traffic generator

	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_tx_ctrl                , offset = 0x10, data = 0x57 

Info: clearing the traffic generator statistics

	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_clear_dropped_counter  , offset = 0x7, data = 0x3 
	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_clear_dropped_counter  , offset = 0x7, data = 0x0 

Info: clearing the statistics

	Successfully Write EHIPLANE Channel 0, User Register cntr_tx_config                        , offset = 0x845, data = 0x1 
	Successfully Write EHIPLANE Channel 0, User Register cntr_rx_config                        , offset = 0x945, data = 0x1 

Info: Enabling the statistics

	Successfully Write EHIPLANE Channel 0, User Register cntr_tx_config                        , offset = 0x845, data = 0x0 
	Successfully Write EHIPLANE Channel 0, User Register cntr_rx_config                        , offset = 0x945, data = 0x0 
.
.
.
	Successfully Read  EHIPLANE Channel 0, User Register phy_ehip_csr_soft_reset               , offset = 0x310, data = 0x0 

	C3 ELANE Channel 0 System Reset is successfully 


Info: Training PTP RX AIB deskew and waiting for PTP RX ready...

	Successfully Read  EHIPLANE Channel 0, PIO Register, offset = 0x0, data = 0x5 
.
.
.
	Successfully Read  EHIPLANE Channel 0, PIO Register, offset = 0x0, data = 0x7 

Info: PTP RX AIB Deskew Done


Info: clearing the traffic generator statistics

	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_clear_dropped_counter  , offset = 0x7, data = 0x3 
	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_clear_dropped_counter  , offset = 0x7, data = 0x0 

Info: clearing the statistics

	Successfully Write EHIPLANE Channel 0, User Register cntr_tx_config                        , offset = 0x845, data = 0x1 
	Successfully Write EHIPLANE Channel 0, User Register cntr_rx_config                        , offset = 0x945, data = 0x1 

Info: Enabling the statistics

	Successfully Write EHIPLANE Channel 0, User Register cntr_tx_config                        , offset = 0x845, data = 0x0 
	Successfully Write EHIPLANE Channel 0, User Register cntr_rx_config                        , offset = 0x945, data = 0x0 

Info: Accuracy measurement settings

	Successfully Read  RSFEC Register rsfec_cw_pos_rx_3                    , offset = 0x1cc, data = 0x2e 

Info: RX slip count = 0xe 


Info: UI Value = 0x0009EE01 


Info: TX Extra Latency = 0x2c10247 


Info: RX Extra Latency = 0x5d17496 

	Successfully Write EHIPLANE Channel 0, User Register tx_ptp_extra_latency                  , offset = 0xa0a, data = 0x2c102 
.
.
.
	Successfully Read  EHIPLANE Channel 0, PIO Register, offset = 0xc, data = 0x101 

Info: Iteration = 1 : TX Timestamp = 000000000011274d263fa436,  RX Timestamp = 000000000011274d263d4680,  Accuracy Difference = 2.36605835 ns 

	Successfully Write EHIPLANE Channel 0, PIO Register, offset = 0xc, data = 0x0 
	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_tx_ctrl                , offset = 0x10, data = 0x57 
	Successfully Write EHIPLANE Channel 0, PIO Register, offset = 0xc, data = 0x102 
	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_tx_ctrl                , offset = 0x10, data = 0x55 
	Successfully Read  EHIPLANE Channel 0, User Register cntr_tx_64b_lo                        , offset = 0x816, data = 0x2 
	Successfully Read  EHIPLANE Channel 0, User Register cntr_rx_64b_lo                        , offset = 0x916, data = 0x2 
	Successfully Read  EHIPLANE Channel 0, PIO Register, offset = 0x4, data = 0x17137aad 
	Successfully Read  EHIPLANE Channel 0, PIO Register, offset = 0x5, data = 0x11284d 
	Successfully Read  EHIPLANE Channel 0, PIO Register, offset = 0x6, data = 0x0 
	Successfully Read  EHIPLANE Channel 0, PIO Register, offset = 0x8, data = 0x17111cf7 
	Successfully Read  EHIPLANE Channel 0, PIO Register, offset = 0x9, data = 0x11284d 
	Successfully Read  EHIPLANE Channel 0, PIO Register, offset = 0xa, data = 0x0 
	Successfully Read  EHIPLANE Channel 0, PIO Register, offset = 0x7, data = 0x2 
	Successfully Read  EHIPLANE Channel 0, PIO Register, offset = 0xc, data = 0x102 
.
.
.

Info: Iteration = 1000 : TX Timestamp = 00000000003331b311e971d6,  RX Timestamp = 00000000003331b311e9df10,  Accuracy Difference = -0.42666626 ns 


Info: Stopping the traffic generator

	Successfully Write EHIPLANE Channel 0, PIO Register, offset = 0xc, data = 0x0 
	Successfully Write EHIPLANE Channel 0, Traffic GEN/CHK Register pkt_tx_ctrl                , offset = 0x10, data = 0x57 
.
.
	Successfully Read  EHIPLANE Channel 0, User Register cntr_rx_badlt_hi                      , offset = 0x969, data = 0x0 

	Test End time is: 17:50:40
	Test End date is: 03/12/2019

Info: Closed JTAG Master Service



Info: Test <c3_elane_ptp_traffic_basic_test> Passed
Related Information
Level Two Title