Networking Interface for Open Programmable Acceleration Engine: Intel® Programmable Acceleration Card with Intel® Arria® 10 GX FPGA

Download PDF
ID 683532
Date 8/05/2019
Public
Document Table of Contents
Document Table of Contents x
1. Introduction 2. AFU Design 3. OPAE Support 4. Networking Interface for Open Programmable Acceleration Engine: Intel® PAC with Intel® Arria® 10 GX FPGA Revision History
1. Introduction x
1.1. How to Use this Guide
2. AFU Design x
2.1. HSSI Device Interface 2.2. Connecting the MAC to the HSSI PHY 2.3. Verifying Network Port Function
2.1. HSSI Device Interface x
2.1.1. HSSI Clocks 2.1.2. HSSI Unified Data Interface 2.1.3. HSSI PHY Control and Status 2.1.4. HSSI PR Management 2.1.5. HSSI Reset Control and Status 2.1.6. Initialization
2.2. Connecting the MAC to the HSSI PHY x
2.2.1. 4x10GBASE-SR Mode 2.2.2. 40GBASE-SR4 Mode
2.2.1. 4x10GBASE-SR Mode x
2.2.1.1. Clocks in 4x10GBASE-SR Mode 2.2.1.2. Unified Data Interface in 4x10GBASE-SR Mode 2.2.1.3. PHY Control and Status in 4x10GBASE-SR Mode 2.2.1.4. PR Management in 4x10GBASE-SR Mode 2.2.1.5. Reset Control and Status in 4x10GBASE-SR Mode 2.2.1.6. Initialization in 4x10GBASE-SR Mode 2.2.1.7. Unused 10GbE Channels
2.2.2. 40GBASE-SR4 Mode x
2.2.2.1. Clocks in 40GBASE-SR4 Mode 2.2.2.2. Unified Data Interface in 40GBASE-SR4 Mode 2.2.2.3. PHY Control and Status in 40GBASE-SR4 Mode 2.2.2.4. PR Management in 40GBASE-SR4 Mode 2.2.2.5. Reset Control and Status in 40GBASE-SR4 Mode 2.2.2.6. Initialization in 40GBASE-SR4 Mode
3. OPAE Support x
3.1. OPAE Driver HSSI sysfs Files 3.2. Managing the Network Port
3.1. OPAE Driver HSSI sysfs Files x
3.1.1. The board_id sysfs 3.1.2. The eeprom sysfs 3.1.3. The config sysfs 3.1.4. The equalizer_tune sysfs
3.1.4. The equalizer_tune sysfs x
3.1.4.1. Receiver CTLE AC Gain sysfs Encodings 3.1.4.2. Receiver VGA sysfs Encodings 3.1.4.3. Receiver CTLE DC Gain sysfs Encodings 3.1.4.4. Transmitter Pre-Emphasis First Post Tap Encodings 3.1.4.5. Transmitter Pre-Emphasis Second Post Tap Encodings 3.1.4.6. Transmitter Pre-Emphasis First Pre Tap Encodings 3.1.4.7. Transmitter Pre-Emphasis Second Pre Tap Encodings 3.1.4.8. Transmitter VOD Encodings
3.2. Managing the Network Port x
3.2.1. Configuring the Network Port 3.2.2. Reading the Base MAC Address from the Intel® PAC with Intel® Arria® 10 GX FPGA 3.2.3. Modifying HSSI PHY Transceiver PMA Settings
3.2.3. Modifying HSSI PHY Transceiver PMA Settings x
3.2.3.1. HSSI PHY Analog PMA Presets
1. Introduction
2. AFU Design
3. OPAE Support
4. Networking Interface for Open Programmable Acceleration Engine: Intel® PAC with Intel® Arria® 10 GX FPGA Revision History

2.2.2.2. Unified Data Interface in 40GBASE-SR4 Mode

Each lane of the 40GbE PCS PHY data interface is striped across 128-bit segments of the unified data interface transmit and receive data ports. Each 40-bit PCS PHY data lane is mapped to the lower 40 bits of the 128-bit segment. The upper 88 bits of the transmit datapath segment should be statically driven low. The upper 88 bits of the receive datapath segment should be left unconnected.

The unified data interface’s transmit and receive control ports are not utilized in 40GBASE-SR4 mode. Statically drive the a2f_tx_control port low and leave f2a_rx_control unconnected.

Flow control is utilized in 40GBASE-SR4 mode between the 40GbE PCS and HSSI PHY PMA layers. See the HSSI Unified Data Interface section for details about the flow control signaling.

Related Information
Level Two Title