Networking Interface for Open Programmable Acceleration Engine: Intel® Programmable Acceleration Card with Intel® Arria® 10 GX FPGA

Download PDF
ID 683532
Date 8/05/2019
Public
Document Table of Contents
Document Table of Contents x
1. Introduction 2. AFU Design 3. OPAE Support 4. Networking Interface for Open Programmable Acceleration Engine: Intel® PAC with Intel® Arria® 10 GX FPGA Revision History
1. Introduction x
1.1. How to Use this Guide
2. AFU Design x
2.1. HSSI Device Interface 2.2. Connecting the MAC to the HSSI PHY 2.3. Verifying Network Port Function
2.1. HSSI Device Interface x
2.1.1. HSSI Clocks 2.1.2. HSSI Unified Data Interface 2.1.3. HSSI PHY Control and Status 2.1.4. HSSI PR Management 2.1.5. HSSI Reset Control and Status 2.1.6. Initialization
2.2. Connecting the MAC to the HSSI PHY x
2.2.1. 4x10GBASE-SR Mode 2.2.2. 40GBASE-SR4 Mode
2.2.1. 4x10GBASE-SR Mode x
2.2.1.1. Clocks in 4x10GBASE-SR Mode 2.2.1.2. Unified Data Interface in 4x10GBASE-SR Mode 2.2.1.3. PHY Control and Status in 4x10GBASE-SR Mode 2.2.1.4. PR Management in 4x10GBASE-SR Mode 2.2.1.5. Reset Control and Status in 4x10GBASE-SR Mode 2.2.1.6. Initialization in 4x10GBASE-SR Mode 2.2.1.7. Unused 10GbE Channels
2.2.2. 40GBASE-SR4 Mode x
2.2.2.1. Clocks in 40GBASE-SR4 Mode 2.2.2.2. Unified Data Interface in 40GBASE-SR4 Mode 2.2.2.3. PHY Control and Status in 40GBASE-SR4 Mode 2.2.2.4. PR Management in 40GBASE-SR4 Mode 2.2.2.5. Reset Control and Status in 40GBASE-SR4 Mode 2.2.2.6. Initialization in 40GBASE-SR4 Mode
3. OPAE Support x
3.1. OPAE Driver HSSI sysfs Files 3.2. Managing the Network Port
3.1. OPAE Driver HSSI sysfs Files x
3.1.1. The board_id sysfs 3.1.2. The eeprom sysfs 3.1.3. The config sysfs 3.1.4. The equalizer_tune sysfs
3.1.4. The equalizer_tune sysfs x
3.1.4.1. Receiver CTLE AC Gain sysfs Encodings 3.1.4.2. Receiver VGA sysfs Encodings 3.1.4.3. Receiver CTLE DC Gain sysfs Encodings 3.1.4.4. Transmitter Pre-Emphasis First Post Tap Encodings 3.1.4.5. Transmitter Pre-Emphasis Second Post Tap Encodings 3.1.4.6. Transmitter Pre-Emphasis First Pre Tap Encodings 3.1.4.7. Transmitter Pre-Emphasis Second Pre Tap Encodings 3.1.4.8. Transmitter VOD Encodings
3.2. Managing the Network Port x
3.2.1. Configuring the Network Port 3.2.2. Reading the Base MAC Address from the Intel® PAC with Intel® Arria® 10 GX FPGA 3.2.3. Modifying HSSI PHY Transceiver PMA Settings
3.2.3. Modifying HSSI PHY Transceiver PMA Settings x
3.2.3.1. HSSI PHY Analog PMA Presets
1. Introduction
2. AFU Design
3. OPAE Support
4. Networking Interface for Open Programmable Acceleration Engine: Intel® PAC with Intel® Arria® 10 GX FPGA Revision History

3.1.4.4. Transmitter Pre-Emphasis First Post Tap Encodings

analog-pma-setting-index = "3"

HSSI PHY transmitter pre-emphasis first post tap is specified using a combination of two parameters:

  • XCVR_A10_TX_PRE_EMP_SIGN_1ST_POST_TAP – specifies positive or negative pre-emphasis polarity.
  • XCVR_A10_TX_PRE_EMP_SWITCHING_CTRL_1ST_POST_TAP – specifies pre-emphasis magnitude.

The following table shows the supported range of values for transmitter pre-emphasis first post tap with the corresponding sysfs analog-pma-setting hex string value.

Table 17.  Transmitter Pre-Emphasis First Post Tap sysfs Value Encodings

XCVR_A10_TX_PRE_EMP_SWITCHING_CTRL_1ST_POST_TAP

analog- pma -setting

Range of decimal values from 0 to 25

XCVR_A10_TX_PRE_EMP_SIGN_1ST_POST_TAP = FIR_POST_1T_POS

Range of string values from "0" to "19" (default = "0")

Range of decimal values from 0 to 25

XCVR_A10_TX_PRE_EMP_SIGN_1ST_POST_TAP = FIR_POST_1T_NEG

Range of string values from "40" to "59"
Related Information
Level Two Title