AN 832: Intel FPGA JESD204B IP Core and ADI AD9208 Hardware Checkout Report for Intel Stratix 10 Devices

Download PDF
ID 683529
Date 5/24/2018
Public
Document Table of Contents
Document Table of Contents x
1. Intel FPGA JESD204B IP Core and ADI AD9208 Hardware Checkout Report for Intel® Stratix® 10 Devices
1. Intel FPGA JESD204B IP Core and ADI AD9208 Hardware Checkout Report for Intel® Stratix® 10 Devices x
1.1. Hardware Requirements 1.2. Hardware Setup 1.3. Hardware Checkout Methodology 1.4. JESD204B IP Core and ADC Configurations 1.5. Test Results 1.6. Test Result Comments 1.7. Document Revision History for AN 832: Intel FPGA JESD204B IP Core and ADI AD9208 Hardware Checkout Report for Intel® Stratix® 10 Devices 1.8. Appendix
1.3. Hardware Checkout Methodology x
1.3.1. Receiver Data Link Layer 1.3.2. Receiver Transport Layer 1.3.3. Descrambling 1.3.4. Deterministic Latency (Subclass 1)
1.3.1. Receiver Data Link Layer x
1.3.1.1. Code Group Synchronization (CGS) 1.3.1.2. Initial Frame and Lane Synchronization (ILA)
1. Intel FPGA JESD204B IP Core and ADI AD9208 Hardware Checkout Report for Intel® Stratix® 10 Devices

1.3.1.1. Code Group Synchronization (CGS)

Table 1.  CGS Test Cases
Test Case Objective Description Passing Criteria

CGS.1

Check whether sync request is deasserted after correct reception of four successive /K/ characters.

The following signals in <ip_variant_name>_inst_phy.v are tapped:

  • jesd204_rx_pcs_data[(L*32)-1:0]
  • jesd204_rx_pcs_data_valid[L-1:0]
  • jesd204_rx_pcs_kchar_data[(L*4)-1:0] 1

The following signals in <ip_variant_name>.v are tapped:

  • rx_dev_sync_n
  • jesd204_rx_int

The rxlink_clk is used as the sampling clock for the Signal Tap.

Each lane is represented by 32-bit data bus in jesd204_rx_pcs_data signal. The 32-bit data bus for is divided into 4 octets.

  • /K/ character or K28.5 (0xBC) is observed at each octet of the jesd204_rx_pcs_data bus.
  • The jesd204_rx_pcs_data_valid signal is asserted to indicate data from the PCS is valid.
  • The jesd204_rx_pcs_kchar_data signal is asserted whenever control characters like /K/, /R/, /Q/, or /A/ characters are observed.
  • The rx_dev_sync_n signal is deasserted after correct reception of at least four successive /K/ characters.
  • The jesd204_rx_int signal is deasserted if there is no error.

CGS.2

Check full CGS at the receiver after correct reception of another four 8B/10B characters.

The following signals in <ip_variant_name>_inst_phy.v are tapped:

  • jesd204_rx_pcs_errdetect[(L*4)-1:0]
  • jesd204_rx_pcs_disperr[(L*4)-1:0] 1

The following signals in <ip_variant_name>.v are tapped:

  • jesd204_rx_int

The rxlink_clk is used as the sampling clock for the Signal Tap.

The jesd204_rx_pcs_errdetect, jesd204_rx_pcs_disperr, and jesd204_rx_int signals should not be asserted during CGS phase.

1 L is the number of lanes.
Level Two Title