R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide

ID 683501
Date 10/02/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

1.2. Features

The R-Tile Avalon® streaming Intel FPGA IP for PCI Express* supports the following features:

  • Includes a complete protocol stack including the Transaction, Data Link, and Physical Layers implemented as a Hard IP.
  • Supports Root Port (RP), Endpoint (EP) and TLP Bypass (BP) modes.
    Table 1.  Configurations Natively Supported by R-TileEndpoint = EP; Root Port = RP; TLP Bypass = BP
    Configuration Application Interface Data Width (bits) EP/RP/BP
    Gen5/Gen4/Gen3 x16 1024 EP/RP/BP
    Gen4/Gen3 x16 512 1 EP/RP/BP
    Gen5/Gen4/Gen3 x8x8 512 EP/RP/BP
    Gen4/Gen3 x8x8 256 1 EP/RP/BP
    Gen5/Gen4/Gen3 x4x4x4x4 256 EP/RP/BP
    Gen4/Gen3 x4x4x4x4 128 1 EP/RP/BP
    PIPE Direct 64 bits per Lane N/A
    Note: Gen1/Gen2 configurations are supported via link down-training.
    Note: When selecting Gen3 or Gen4 configurations, the R-Tile Avalon® streaming Intel FPGA IP for PCI Express* continues to advertise its capabilities as a device compliant with the 5.0 PCI Express* Base Specification.
  • Table 2.  Topologies Supported by R-Tile
    Topology\ Lane# 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
    x16 Port 0 (EP/RP/BP)
    x8x8 Port 0 (EP/RP/BP) Port 1 (EP/RP/BP)
    x4x4x4x4 Port 2 (EP/RP/BP) Port 0 (EP/RP/BP) Port 1 (EP/RP/BP) Port 3 (EP/RP/BP)
    PIPE Direct PIPE Direct
    Note:
    Port 2 is only available in Production devices or Engineering Samples with the following OPNs:
    • AGIx027R29AxxxxR2
    • AGIx027R29AxxxxR3
    • AGIx027R29BxxxxR3
    • AGIx023R18AxxxxR0
    • AGIx041R29DxxxxR0
    • AGIx041R29DxxxxR1
    • AGMx039R47AxxR0
    For additional details on OPN decoding, refer to the Available Options section of the Intel Agilex® 7 FPGAs and SoCs Device Overview.
  • The following PIPE Direct bundle modes are supported and are selectable via the PIPE Direct Mode menu in the Parameter Editor in Intel® Quartus® Prime:
    • 1x16
    • 2x8
    • 4x4
    • 8x2
    • 16x1
    • 2x4 : 1x8
    • 4x2 : 1x8
    • 8x1 : 1x8
    • 1x8 : 2x4
    • 4x2 : 2x4
    • 8x1 : 2x4
    • 1x8 : 4x2
    • 2x4 : 4x2
    • 8x1 : 4x2
    • 1x8 : 8x1
    • 2x4 : 8x1
    • 4x2 : 8x1
    Note: 1x16 means all 16 PIPE Direct channels act in a bundle mode. 16x1 means all 16 channels act as independent channels. 2x8 means the channels are in two 8-channel bundles. 2x4 : 1x8 means the channels in the Lower 8 lanes are organized as two 4-channel bundles, while the channels in the Upper 8 lanes are in an 8-channel bundle. Refer to PIPE Direct Reset Sequence for reset considerations when lanes 0-8 are not in use by the Soft IP Controller.
  • Static port bifurcation (x8x8, x4x4x4).
  • Supports Precision Time Measurement (PTM) (Endpoint only).
    Note: Only Ports 0 and 1 support PTM.
  • Supports TLP Bypass mode in Upstream or Downstream configuration.
    • Supports one x16, two x8, or four x4 interfaces.
  • Supports up to 512-byte maximum payload size (MPS).
  • Supports up to 4096-byte (4 KB) maximum read request size (MRRS).
  • Single Virtual Channel (VC).
  • Latency Tolerance Reporting (LTR).
  • Page Request Services (PRS).
    Note: Only Ports 0 and 1 support PRS.
  • MSI and MSI-X.
    Note: Only Ports 0 and 1 support MSI and MSI-X.
  • Completion Timeout Ranges.
  • Atomic Operations (FetchAdd/Swap/CAS).
  • Extended Tag Support.
    • 10-bit Tag Support (Maximum of 768 outstanding tags (x16) / 512 outstanding tags (x8/x4) at any given time, for all functions combined).
  • Separate Refclk with Independent Spread Spectrum Clocking (SRIS).
  • Separate Refclk with no Spread Spectrum Clocking (SRNS).
  • Common Refclk architecture.
  • PCI Express* Advanced Error Reporting (PF only).
    Note: Advanced Error Reporting is always enabled in the R-Tile Avalon® streaming Intel FPGA IP for PCIe.
  • ECRC generation and checking (when the IP is not in TLP Bypass mode).
    • Application logic needs to handle ECRC generation and checking when the IP is in TLP Bypass mode.
  • Data bus parity protection.
  • Supports D0 and D3 device power management states.
  • Lane Margining at Receiver.
  • Retimers presence detection.
  • User packet interface with separate header, data and prefix.
  • User packet interface with a split-bus architecture where the header, data and prefix busses consist of four segments each (x16 mode only).
  • Up to 768 outstanding Non-Posted requests (x16 core only).
  • Up to 512 outstanding Non-Posted requests (x8 and x4 cores).
  • Summary of outstanding Non-Posted requests supported when 8-bit tags or 10-bit tags are enabled:
    Table 3.  Outstanding Non-Posted Requests Supported
    Ports Active Cores 8-bit Tags 10-bit Tags
    0 x16 256 768 (*)
    1 x8 256 512
    2 and 3 x4 256 512
    Note: (*): Use tags 256 to 1023.
  • Completion timeout interface.
    • The PCIe Hard IP can optionally track outgoing non-posted packets to report completion timeout information to the application.
  • You cannot change the pin allocations for the R-Tile Avalon® streaming Intel FPGA IP for PCI Express* in the Intel® Quartus® Prime project. However, this IP does support lane reversal per port (x16, x8, x4_0, x4_1) and polarity inversion on the PCB by default.
  • Supports Autonomous Hard IP mode.
    • This mode allows the PCIe Hard IP to communicate with the Host before the FPGA configuration and entry into User mode are complete.
      Note: Unless Readiness Notifications mechanisms are used, the Root Complex or the system software must allow at least one second after a Conventional Reset of a device before it may determine that a device that fails to return a Successful Completion status for a valid Configuration Request is a broken device. This period is independent of how quickly Link training completes.
  • Supports CvP Init and CvP Update.
    Note: For Gen3, Gen4 and Gen5 x16 variants, Port 0 (corresponding to lanes 0 - 15) supports the CvP features. For Gen3, Gen4 and Gen5 x8 variants, only Port 0 (corresponding to lanes 0 - 7) supports the CvP features. Port 1 (corresponding to lanes 8 - 15) does not support CvP.
  • VCS*, VCS* MX, Siemens EDA QuestaSim*, and Xcelium* are the only simulators supported in the latest release of Intel® Quartus® Prime.
    Note:
    The Xcelium* simulator support is only available in Production devices or Engineering Samples with the following OPNs:
    • AGIx027R29AxxxxR2
    • AGIx027R29AxxxxR3
    • AGIx027R29BxxxxR3
    • AGIx023R18AxxxxR0
    • AGIx041R29DxxxxR0
    • AGIx041R29DxxxxR1
    • AGMx039R47AxxR0

    For more details on OPN decoding, refer to the Available Options section of the Intel Agilex® 7 FPGAs and SoCs Device Overview.

  • The R-Tile PHY layer does not support sending a Beacon signal.
Note: Throughout this User Guide, the term Avalon-ST may be used as an abbreviation for the Avalon® streaming interface or IP.
1 These configurations are only available in Production devices or Engineering Samples with the following OPNs: AGIx027R29AxxxxR2, AGIx027R29AxxxxR3, AGIx027R29BxxxxR3, AGIx023R18AxxxxR0, AGIx041R29DxxxxR0, AGIx041R29DxxxxR1, AGMx039R47AxxR0. For more details on OPN decoding, refer to the Available Options section of the Intel Agilex® 7 FPGAs and SoCs Device Overview