R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide

Download PDF
ID 683501
Date 10/02/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express 2. IP Architecture and Functional Description 3. Advanced Features 4. Interfaces 5. Parameters 6. Troubleshooting/Debugging 7. R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide Archives 8. Document Revision History for the R-Tile Avalon® Streaming Intel FPGA IP for PCI Express User Guide A. Configuration Space Registers B. Root Port Enumeration C. Implementation of Address Translation Services (ATS) in Endpoint Mode D. Packets Forwarded to the User Application in TLP Bypass Mode E. Margin Masks for the R-Tile Avalon Streaming Intel FPGA IP for PCI Express
1. About the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express x
1.1. Overview 1.2. Features 1.3. Release Information 1.4. Device Family Support 1.5. Performance and Resource Utilization 1.6. IP Core Support Levels
1.1. Overview x
1.1.1. Standards and Specifications Compliance
1.2. Features x
1.2.1. Multifunction and Virtualization Features
2. IP Architecture and Functional Description x
2.1. Overview 2.2. PCIe Hard IP Mode 2.3. PIPE Direct Mode
2.2. PCIe Hard IP Mode x
2.2.1. Clocking 2.2.2. Reset 2.2.3. PCI Express Protocol Stack
2.2.2. Reset x
2.2.2.1. Single PERST 2.2.2.2. Independent PERST Pins 2.2.2.3. Independent GPIO PERST
2.2.2.2. Independent PERST Pins x
2.2.2.2.1. REFCLK and PERST Guidelines When Using Independent PERST Pins
2.2.2.3. Independent GPIO PERST x
2.2.2.3.1. REFCLK and PERST Guidelines when Using Independent GPIO PERST
2.2.3. PCI Express Protocol Stack x
2.2.3.1. PMA 2.2.3.2. Data Link Layer Overview 2.2.3.3. Transaction Layer Overview
2.2.3.3. Transaction Layer Overview x
2.2.3.3.1. Deferrable Memory Write (DMWr)
2.3. PIPE Direct Mode x
2.3.1. Clocking 2.3.2. Reset 2.3.3. PIPE Layer
2.3.3. PIPE Layer x
2.3.3.1. Preset Mappings
3. Advanced Features x
3.1. PCIe Port Bifurcation and PHY Channel Mapping 3.2. Virtualization Support 3.3. TLP Bypass Mode
3.2. Virtualization Support x
3.2.1. SR-IOV Support 3.2.2. VirtIO Support
3.2.1. SR-IOV Support x
3.2.1.1. SR-IOV Supported Features List 3.2.1.2. Implementation 3.2.1.3. VF to PF Mapping 3.2.1.4. Function Level Reset (FLR)
3.2.1.2. Implementation x
3.2.1.2.1. VF Error Flag Interface (for x16/x8 Cores Only)
3.2.2. VirtIO Support x
3.2.2.1. VirtIO Supported Features List 3.2.2.2. Overview 3.2.2.3. Parameters 3.2.2.4. VirtIO PCI Configuration Access Interface 3.2.2.5. Registers
3.2.2.5. Registers x
3.2.2.5.1. VirtIO Common Configuration Capability Register (Address: 0x012) 3.2.2.5.2. VirtIO Common Configuration BAR Indicator Register (Address: 0x013) 3.2.2.5.3. VirtIO Common Configuration BAR Offset Register (Address: 0x014) 3.2.2.5.4. VirtIO Common Configuration Structure Length Register (Address 0x015) 3.2.2.5.5. VirtIO Notifications Capability Register (Address: 0x016) 3.2.2.5.6. VirtIO Notifications BAR Indicator Register (Address: 0x017) 3.2.2.5.7. VirtIO Notifications BAR Offset Register (Address: 0x018) 3.2.2.5.8. VirtIO Notifications Structure Length Register (Address: 0x019) 3.2.2.5.9. VirtIO Notifications Notify Off Multiplier Register (Address: 0x01A) 3.2.2.5.10. VirtIO ISR Status Capability Register (Address: 0x02F) 3.2.2.5.11. VirtIO ISR Status BAR Indicator Register (Address: 0x030) 3.2.2.5.12. VirtIO ISR Status BAR Offset Register (Address: 0x031) 3.2.2.5.13. VirtIO ISR Status Structure Length Register (Address: 0x032) 3.2.2.5.14. VirtIO Device Specific Capability Register (Address: 0x033) 3.2.2.5.15. VirtIO Device Specific BAR Indicator Register (Address: 0x034) 3.2.2.5.16. VirtIO Device Specific BAR Offset Register (Address 0x035) 3.2.2.5.17. VirtIO Device Specific Structure Length Register (Address: 0x036) 3.2.2.5.18. VirtIO PCI Configuration Access Capability Register (Address: 0x037) 3.2.2.5.19. VirtIO PCI Configuration Access BAR Indicator Register (Address: 0x038) 3.2.2.5.20. VirtIO PCI Configuration Access BAR Offset Register (Address: 0x039) 3.2.2.5.21. VirtIO PCI Configuration Access Structure Length Register (Address: 0x03A) 3.2.2.5.22. VirtIO PCI Configuration Access Data Register (Address: 0x03B)
3.3. TLP Bypass Mode x
3.3.1. Overview 3.3.2. Register Settings for the TLP Bypass Mode 3.3.3. Hard IP Reconfiguration Interface 3.3.4. Avalon® Streaming Interface
3.3.2. Register Settings for the TLP Bypass Mode x
3.3.2.1. TLPBYPASS_ERR_EN (Address 0x1314) 3.3.2.2. TLPBYPASS_ERR_STATUS (Address 0x1310)
3.3.4. Avalon® Streaming Interface x
3.3.4.1. Configuration TLP 3.3.4.2. Transmit Interface 3.3.4.3. Receive Interface 3.3.4.4. Malformed TLP 3.3.4.5. ECRC
4. Interfaces x
4.1. Clocks and Resets 4.2. Serial Data Interface 4.3. PCI Express Mode 4.4. PIPE Direct Mode
4.1. Clocks and Resets x
4.1.1. Clocks 4.1.2. Resets
4.3. PCI Express Mode x
4.3.1. Avalon® Streaming Interface 4.3.2. Precision Time Measurement (PTM) Interface (Endpoint Only) 4.3.3. Interrupt Interface 4.3.4. Hard IP Reconfiguration Interface 4.3.5. Error Interface 4.3.6. Completion Timeout Interface 4.3.7. Configuration Intercept Interface 4.3.8. Power Management Interface 4.3.9. Hard IP Status Interface 4.3.10. Page Request Services (PRS) Interface (Endpoint Only) 4.3.11. Function-Level Reset (FLR) Interface (Endpoint Only) 4.3.12. SR-IOV VF Error Flag Interface (Endpoint Only) 4.3.13. General Purpose VSEC Interface
4.3.1. Avalon® Streaming Interface x
4.3.1.1. TLP Header and Data Alignment for the Avalon® streaming RX and TX Interfaces 4.3.1.2. Credit Control 4.3.1.3. Avalon® Streaming RX Interface 4.3.1.4. Avalon® Streaming TX Interface 4.3.1.5. Tag Allocation
4.3.1.2. Credit Control x
4.3.1.2.1. Credit Interface - Data and Header 4.3.1.2.2. Credit Initialization 4.3.1.2.3. Credit Update/Release 4.3.1.2.4. RX Flow Control Interface 4.3.1.2.5. TX Flow Control Interface
4.3.1.3. Avalon® Streaming RX Interface x
4.3.1.3.1. Application Logic Guidelines for the Avalon Streaming RX Interface
4.3.1.4. Avalon® Streaming TX Interface x
4.3.1.4.1. Application Logic Guidelines for the Avalon Streaming TX Interface 4.3.1.4.2. Avalon® Streaming TX Interface pX_tx_st_ready_o Behavior
4.3.1.5. Tag Allocation x
4.3.1.5.1. Completion Buffer Size
4.3.3. Interrupt Interface x
4.3.3.1. Legacy Interrupts 4.3.3.2. MSI 4.3.3.3. MSI-X
4.3.3.3. MSI-X x
4.3.3.3.1. Implementing MSI-X Interrupts
4.3.8. Power Management Interface x
4.3.8.1. D3Hot Entry 4.3.8.2. D3Hot Exit 4.3.8.3. D3Cold Entry 4.3.8.4. D3Cold Exit
4.3.8.2. D3Hot Exit x
4.3.8.2.1. D3Hot Exit Initiated by Host 4.3.8.2.2. D3Hot Exit Initiated by EP
4.4. PIPE Direct Mode x
4.4.1. Data Signals 4.4.2. Command and Status Signals 4.4.3. Message Bus Signals 4.4.4. Deskew Signals 4.4.5. PIPE Direct Reset Sequence 4.4.6. PIPE Direct Speed Change 4.4.7. PIPE Lane Reset Staggering 4.4.8. Unused Lanes in PIPE Direct Mode
4.4.1. Data Signals x
4.4.1.1. Transmit Signals 4.4.1.2. Receive Signals
4.4.4. Deskew Signals x
4.4.4.1. MAC to PHY (M2P) Signals 4.4.4.2. PHY to MAC (P2M) Signals
5. Parameters x
5.1. Top-Level Settings 5.2. Core Parameters
5.2. Core Parameters x
5.2.1. Avalon Parameters 5.2.2. Base Address Registers 5.2.3. PCI Express and PCI Capabilities Parameters
5.2.3. PCI Express and PCI Capabilities Parameters x
5.2.3.1. Device Capabilities 5.2.3.2. VirtIO Parameters 5.2.3.3. Link Capabilities 5.2.3.4. Legacy Interrupt Pin Register 5.2.3.5. MSI Capabilities 5.2.3.6. MSI-X Capabilities 5.2.3.7. Slot Capabilities 5.2.3.8. Latency Tolerance Reporting (LTR) 5.2.3.9. Process Address Space ID (PASID) 5.2.3.10. Device Serial Number Capability 5.2.3.11. Page Request Service (PRS) 5.2.3.12. Access Control Service (ACS) 5.2.3.13. Power Management 5.2.3.14. Vendor Specific Extended Capability (VSEC) Registers 5.2.3.15. TLP Processing Hints (TPH) 5.2.3.16. Address Translation Services (ATS) Capabilities 5.2.3.17. Precision Time Measurement (PTM)
6. Troubleshooting/Debugging x
6.1. Hardware Debug 6.2. Operating System Tools and Utilities 6.3. Signal Tap Logic Analyzer 6.4. Using the Hard IP Reconfiguration Interface for Debugging 6.5. Other Interfaces That Can Be Used for Debug Activities 6.6. Debug Toolkit
6.1. Hardware Debug x
6.1.1. Debugging Link Training Issues 6.1.2. Debugging Device Enumeration Issues 6.1.3. Debugging Data Transfer and Performance Issues
6.1.3. Debugging Data Transfer and Performance Issues x
6.1.3.1. Advanced Error Reporting (AER)
6.2. Operating System Tools and Utilities x
6.2.1. Using lspci Utility to Read Negotiated Link Speed
6.4. Using the Hard IP Reconfiguration Interface for Debugging x
6.4.1. Using the Hard IP Reconfiguration Interface to Enable and Read ECRC and LCRC Error Counts
6.6. Debug Toolkit x
6.6.1. Overview 6.6.2. Enabling the R-Tile Debug Toolkit 6.6.3. Launching the R-Tile Debug Toolkit 6.6.4. Using the R-Tile Debug Toolkit
6.6.4. Using the R-Tile Debug Toolkit x
6.6.4.1. R-Tile Information 6.6.4.2. Event Counters 6.6.4.3. Link Inspector 6.6.4.4. Configuration Space 6.6.4.5. Channel Parameters
6.6.4.5. Channel Parameters x
6.6.4.5.1. General PHY 6.6.4.5.2. Tx Path 6.6.4.5.3. Rx Path 6.6.4.5.4. Lane Margining
C. Implementation of Address Translation Services (ATS) in Endpoint Mode x
C.1. Sending Translated/Untranslated Requests C.2. Sending a Page Request Message from the Endpoint (EP) to the Root Complex (RC) C.3. Invalidating Requests/Completions
D. Packets Forwarded to the User Application in TLP Bypass Mode x
D.1. Upstream TLP Bypass Mode D.2. Downstream TLP Bypass Mode
E. Margin Masks for the R-Tile Avalon Streaming Intel FPGA IP for PCI Express x
E.1. Margin Masks Overview E.2. 5x5 Testing Efficiency E.3. Debug Toolkit Margin Methodology
E.2. 5x5 Testing Efficiency x
E.2.1. First Time Testing E.2.2. Spot Check Testing
E.3. Debug Toolkit Margin Methodology x
E.3.1. Debug Toolkit Testing Process
1. About the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express
2. IP Architecture and Functional Description
3. Advanced Features
4. Interfaces
5. Parameters
6. Troubleshooting/Debugging
7. R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide Archives
8. Document Revision History for the R-Tile Avalon® Streaming Intel FPGA IP for PCI Express User Guide
A. Configuration Space Registers
B. Root Port Enumeration
C. Implementation of Address Translation Services (ATS) in Endpoint Mode
D. Packets Forwarded to the User Application in TLP Bypass Mode
E. Margin Masks for the R-Tile Avalon Streaming Intel FPGA IP for PCI Express

4.3.7. Configuration Intercept Interface

The Configuration Intercept Interface (CII) allows the application logic to detect the occurrence of a Configuration (CFG) request on the link and to modify its behavior. To provide further flexibility, the R-Tile Intel FPGA IP for PCI Express allows you to define up to three different PCIe configuration space ranges to intercept using this interface (refer to CII Address Ranges in the IP Parameter Editor, where the allowed range is 0x - 0xFFF).

Note: If the VirtIO feature is enabled, the ranges 0x50-0x6E and 0xC0-0xF7 are reserved and only one range will be exposed.

The application logic should detect the CFG request at the rising edge of cii_req_o. Due to the latency of the EMIB, the cii_req_o can be deasserted many cycles after the deassertion of cii_halt_i.

The application logic can use the CII to:

  • Delay the processing of a CFG request by the controller. This allows the application to perform any housekeeping task first.
  • Overwrite the data payload of a CfgWr request. The application logic can also overwrite the data payload of a CfgRd Completion TLP.
Note: In the P-Tile Avalon® Streaming Intel FPGA IP for PCIe, the Configuration Output Interface (tl_cfg) provided a subset of the information stored in the PCIe Configuration space. Starting with the R-Tile Avalon® Streaming Intel FPGA IP for PCIe, the CII interface should be used as a replacement for similar functionality. To achieve this, the Application logic should intercept the Configuration TLPs of interest during the enumeration process. Additionally, the Hard IP Reconfiguration Interface (Hard IP Reconfiguration Interface) is available and can also be used to access the PCIe Configuration space information.

This interface also allows you to implement the Intel Vendor Specific Extended Capability (VSEC) registers. All configuration accesses targeting the Intel VSEC registers (addresses 0xD00 to 0xFFF) are automatically mapped to this interface and can be monitored via this interface.

If you are not using this interface, tie cii_halt_p0/1 to logic 0.

Table 70.  Configuration Intercept Interface (CII) Signals
Signal Name Direction Description EP/RP/BP Clock Domain
pX_cii_req_o Output Indicates the CFG request is intercepted and all the other CII signals are valid. EP slow_clk
pX_cii_hdr_poisoned_o Output The poisoned bit in the received TLP header on the CII. EP slow_clk
pX_cii_hdr_first_be_o[3:0] Output The first dword byte enable field in the received TLP header on the CII. EP slow_clk
pX_cii_func_num_o[2:0] Output The function number in the received TLP header on the CII. EP slow_clk
pX_cii_wr_o Output Indicates that cii_dout_p0/1 is valid. This signal is asserted only for a configuration write request. EP slow_clk
pX_cii_wr_vf_active_o Output Indicates that the received TLP targets a virtual function (VF) inside the controller, which is identified by cii_vf_num_o[10:0]. EP slow_clk
pX_cii_vf_num_o[10:0] Output Identifies the VF inside the controller that was targeted. EP slow_clk
pX_cii_addr_o[9:0] Output The double-word register address in the received TLP header on the CII. EP slow_clk
pX_cii_dout_o[31:0] Output Received TLP payload data from the link partner to your application client. The data is in little endian format. The first received payload byte is in bits [7:0]. EP slow_clk
pX_cii_override_en_i Input Override enable. When the application logic asserts this input, the PCIe Hard IP overrides the CfgWr payload or CfgRd completion using the data supplied by the application logic on cii_override_din_i[31:0]. EP slow_clk
pX_cii_override_din_i[31:0] Input Override data.
  • CfgWr: this bus contains the data supplied by the application logic to override the write data to the PCIe Hard IP register.
  • CfgRd: this bus contains the data supplied by the application logic to override the data payload of the Completion TLP.
EP slow_clk
pX_cii_halt_i Input Flow control input signal. When cii_halt_p0/1 is asserted, the PCIe Hard IP halts the processing of CFG requests for the PCIe configuration space registers. EP slow_clk
Figure 38. CII Address Ranges in the IP Parameter Editor
Level Two Title