ID
683394
Date
7/09/2021
Public
Visible to Intel only — GUID: cxu1542149035471
Ixiasoft
1. About this Document
2. System Requirements and Release Installation
3. Installing the OPAE Software Package
4. Identify the FPGA Interface Manager (FIM) and BMC Firmware Version
5. Running FPGA Diagnostics
6. Running the OPAE in a Non-Virtualized Environment
7. Running the OPAE in a Virtualized Environment
8. Intel® Acceleration Stack Quick Start Guide: Intel® FPGA PAC D5005 Archives
9. Document Revision History for Intel® Acceleration Stack Quick Start Guide: Intel® FPGA PAC D5005
A. Handling Graceful Thermal Shutdown
B. FPGA Device Access Permission
C. Memlock Limit
D. Troubleshooting Frequently Asked Questions (FAQ)
D.1. Why do I see a 'No Suitable slots found' message when running fpgasupdate on my AFU image?
D.2. Which environment variables are required?
D.3. What actions do I take if I see the error message 'Error enumerating resources: no driver available'?
D.4. Command lsmod | grep fpga shows no output after installing the OPAE driver. How to successfully install the OPAE driver?
D.5. Command rpm -qa | grep opae does not return the installed opae rpm package. How to successfully install the packages?
D.6. What action do I take if the Intel® FPGA PAC D5005 does not show up on the PCIe bus?
D.7. Why does the PCIe not detect the Intel® FPGA PAC D5005 card?
Visible to Intel only — GUID: cxu1542149035471
Ixiasoft
1. About this Document
Updated for: |
---|
Intel® Acceleration Stack for Intel® Xeon® CPU with FPGAs 2.0.1 |
This document provides a brief introduction to the Intel® FPGA Programmable Acceleration Card (Intel® FPGA PAC) D5005. This guide provides the instructions for the following procedures:
- Installing the Open Programmable Acceleration Engine (OPAE) on the host Intel® Xeon® Processor to manage and access the Intel® FPGA PAC.
- Configuring and flashing the FPGA image and Board Management Controller images.
- Running the example hello_afu in a virtualized and non-virtualized environment.
- Handling Graceful Thermal Shutdown
The Intel® Acceleration Stack for Intel® Xeon® CPU with FPGAs is a collection of software, firmware, and tools that allows both software and RTL developers to take advantage of the power of Intel® FPGA PACs. By offloading computationally intensive tasks to the FPGA, the acceleration platform frees the Intel® Xeon® processor for other critical processing tasks.
Figure 1. Intel® FPGA PAC Platform Hardware and Software Overview