25G Ethernet Stratix® 10 Intel® FPGA IP Design Example User Guide

Download PDF
ID 683252
Date 6/20/2024
Public
Document Table of Contents
Document Table of Contents x
1. 25G Ethernet Intel® FPGA IP Quick Start Guide 2. 10G/25G Ethernet Single-Channel Design Example for Stratix® 10 Devices 3. 25G Ethernet Single-Channel Design Example for Stratix® 10 Devices 4. 25G Ethernet Multi-Channel Design Example for Intel Stratix 10 Devices 5. 25G Ethernet Intel® FPGA IP Design Example References 6. 25G Ethernet Stratix® 10 Intel® FPGA IP Design Example User Guide Archives 7. Document Revision History for the 25G Ethernet Stratix® 10 Intel® FPGA IP Design Example User Guide
1. 25G Ethernet Intel® FPGA IP Quick Start Guide x
1.1. Directory Structure 1.2. Generating the Design Example 1.3. Simulating the 25G Ethernet Intel® FPGA IP Design Example Testbench 1.4. Compiling and Configuring the Design Example in Hardware 1.5. Changing Target Device in Hardware Design Example 1.6. Testing the 25G Ethernet Intel® FPGA IP Design in Hardware
1.2. Generating the Design Example x
1.2.1. Design Example Parameters
1.3. Simulating the 25G Ethernet Intel® FPGA IP Design Example Testbench x
1.3.1. Procedure
1.4. Compiling and Configuring the Design Example in Hardware x
1.4.1. Procedure
1.5. Changing Target Device in Hardware Design Example x
1.5.1. Procedure
1.6. Testing the 25G Ethernet Intel® FPGA IP Design in Hardware x
1.6.1. Procedure
2. 10G/25G Ethernet Single-Channel Design Example for Stratix® 10 Devices x
2.1. Features 2.2. Hardware and Software Requirements 2.3. Functional Description 2.4. Simulation 2.5. Compilation 2.6. Hardware Testing
2.3. Functional Description x
2.3.1. Design Components
2.4. Simulation x
2.4.1. Testbench 2.4.2. Simulation Design Example Components 2.4.3. Test Case—Design Example Without the IEEE 1588v2 Feature 2.4.4. Test Case—Design Example with the IEEE 1588v2 Feature
2.6. Hardware Testing x
2.6.1. Test Procedure—Design Example Without the IEEE 1588v2 Feature 2.6.2. Test Procedure—Design Example with the IEEE 1588v2 Feature
3. 25G Ethernet Single-Channel Design Example for Stratix® 10 Devices x
3.1. Features 3.2. Hardware and Software Requirements 3.3. Functional Description 3.4. Simulation 3.5. Compilation 3.6. Hardware Testing
3.3. Functional Description x
3.3.1. Design Components
3.4. Simulation x
3.4.1. Testbench 3.4.2. Simulation Design Example Components 3.4.3. Test Case—Design Example Without the IEEE 1588v2 Feature 3.4.4. Test Case—Design Example with the IEEE 1588v2 Feature
3.6. Hardware Testing x
3.6.1. Test Procedure—Design Example With and Without the IEEE 1588v2 Feature
4. 25G Ethernet Multi-Channel Design Example for Intel Stratix 10 Devices x
4.1. Features 4.2. Hardware and Software Requirements 4.3. Functional Description 4.4. Simulation 4.5. Compilation 4.6. Hardware Testing
4.3. Functional Description x
4.3.1. Design Components
4.4. Simulation x
4.4.1. Testbench 4.4.2. Simulation Design Example Components 4.4.3. Test Case
4.6. Hardware Testing x
4.6.1. Test Procedure
5. 25G Ethernet Intel® FPGA IP Design Example References x
5.1. Design Example Interface Signals 5.2. Design Example Registers 5.3. Using Transceiver Toolkit on H-Tile Production Device
1. 25G Ethernet Intel® FPGA IP Quick Start Guide
2. 10G/25G Ethernet Single-Channel Design Example for Stratix® 10 Devices
3. 25G Ethernet Single-Channel Design Example for Stratix® 10 Devices
4. 25G Ethernet Multi-Channel Design Example for Intel Stratix 10 Devices
5. 25G Ethernet Intel® FPGA IP Design Example References
6. 25G Ethernet Stratix® 10 Intel® FPGA IP Design Example User Guide Archives
7. Document Revision History for the 25G Ethernet Stratix® 10 Intel® FPGA IP Design Example User Guide

5.3. Using Transceiver Toolkit on H-Tile Production Device

If your design example targets the H-tile production device and Enable auto adaptation triggering for RX PMA CTLE/DFE mode option is turned on, you must perform additional steps to configure the register 0x343 bit[0] before you can use the Transceiver Toolkit. Refer to the description for register 0x343 in the 25G Ethernet Stratix® 10 FPGA IP User Guide for more information.

Follow these steps to use Transceiver Toolkit:
  1. Follow the procedure in the Testing the 25G Ethernet Intel® FPGA IP Design in Hardware section to load the main.tcl script.
  2. For single-channel design example, type reg_write 0x343 0x1 to hold the auto adaptation module FSM in idle state.
  3. For multi-channel design example,
    1. type reg_write 0x343 0x1 for channel 0
    2. type reg_write 0x10343 0x1 for channel 1
    3. type reg_write 0x20343 0x1 for channel 2
    4. type reg_write 0x30343 0x1 for channel 3
  4. Launch the Transceiver Toolkit.
Note: If the register 0x343 bit[0] is not set (1'b1), the transceiver channel is not visible in the Transceiver Toolkit.
Follow these steps after you already used the Transceiver Toolkit:
  1. Close the Transceiver Toolkit.
  2. For single-channel design example, type reg_write 0x343 0x0 to re-start the auto adaptation module FSM.
  3. For multi-channel design example,
    1. type reg_write 0x343 0x0 for channel 0
    2. type reg_write 0x10343 0x0 for channel 1
    3. type reg_write 0x20343 0x0 for channel 2
    4. type reg_write 0x30343 0x0 for channel 3
Note: If the register 0x343 bit[0] is cleared (1'b0) when you opened the Transceiver Toolkit, the System Console may hang.
Related Information
Level Two Title