AN 584: Timing Closure Methodology for Advanced FPGA Designs

Download PDF
ID 683145
Date 10/08/2021
Public
Document Table of Contents
Document Table of Contents x
1. AN 584: Timing Closure Methodology for Advanced FPGA Designs
1. AN 584: Timing Closure Methodology for Advanced FPGA Designs x
1.1. Plan Early for Timing Closure 1.2. Customize Settings Per Application 1.3. Change Fitter Placement Seeds 1.4. Planning for Timing Closure 1.5. Best Practices for Timing Closure 1.6. Resolving Common Timing Issues 1.7. Conclusion 1.8. Document Revision History for AN 584: Timing Closure Methodology for Advanced FPGA Designs
1.4. Planning for Timing Closure x
1.4.1. Timing Closure Planning at Specification Stage 1.4.2. Timing Closure Planning at Coding and Compilation Stage
1.4.1. Timing Closure Planning at Specification Stage x
1.4.1.1. Plan for the Target FPGA Device 1.4.1.2. Plan for On-Chip Debugging
1.4.2. Timing Closure Planning at Coding and Compilation Stage x
1.4.2.1. Plan for Design Hierarchy and Block Partitioning 1.4.2.2. Plan for Early Compilation of Design Blocks 1.4.2.3. Plan for Verification
1.5. Best Practices for Timing Closure x
1.5.1. Performance Planning General Guidelines 1.5.2. Follow Synchronous Design Practices 1.5.3. Follow Recommended Coding Styles 1.5.4. Constraining and Compiling Your Design
1.5.4. Constraining and Compiling Your Design x
1.5.4.1. Setting Location Constraints 1.5.4.2. Setting Proper Timing Constraints 1.5.4.3. Using Optimal Compiler Settings for Your Design
1.6. Resolving Common Timing Issues x
1.6.1. Excessive Logic Levels 1.6.2. Improper Timing Constraints 1.6.3. Handling High Fan-Out Registers 1.6.4. Metastability Issues 1.6.5. Reset Signal Related Issues 1.6.6. Small Margin Timing Constraint Failures 1.6.7. Long Compilation Times
1.6.2. Improper Timing Constraints x
1.6.2.1. Check Constraint Diagnostics
1.6.4. Metastability Issues x
1.6.4.1. Check CDC Design Assistant Rule Violations 1.6.4.2. Check CDC Report
1.6.5. Reset Signal Related Issues x
1.6.5.1. Recovery and Removal Issues
1. AN 584: Timing Closure Methodology for Advanced FPGA Designs

1.6.2.1. Check Constraint Diagnostics

The Timing Analyzer can generate a set of diagnostic reports that help check timing constraints.

Click Tasks > Reports > Constraint Diagnostics to generate these reports.

Figure 7. Timing Analyzer Constraint Diagnostics

You can use the following commands to generate the reports to verify your constraints:

  • Report Unconstrained Paths—reports illegal or unconstrained clocks, input or output ports, and paths.
  • Report SDC—reports all SDC constraints that apply.
  • Report Ignored SDC—reports all SDC assignments that do not apply.
  • Check Timing—reports issues on critical fields like latches, loops, no clock drivers, and others.
  • Report False Path—reports all of the false paths that apply in the design.
  • Report Exceptions—reports a list all exceptions that apply in the design.
  • Report Exceptions Reachability —reports the percentage of reachability on the targets you specified in your exceptions.
Level Two Title