Low Latency Ethernet 10G MAC Intel® Stratix® 10 FPGA IP Design Example User Guide

Download PDF
ID 683026
Date 12/14/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Quick Start Guide 2. 10GBASE-R Ethernet Design Example 3. 10M/100M/1G/2.5G/10G Ethernet Design Example 4. 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature 5. 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature 6. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example 7. Interface Signals Description 8. Configuration Registers Description 9. Low Latency Ethernet 10G MAC Intel® Stratix® 10 FPGA IP Design Example User Guide Archives 10. Document Revision History for the Low Latency Ethernet 10G MAC Intel® Stratix® 10 FPGA IP Design Example User Guide
1. Quick Start Guide x
1.1. Directory Structure 1.2. Generating the Design 1.3. Compiling and Simulating the Design 1.4. Changing Target Device in Hardware Design Example 1.5. Compiling and Testing the Design in Hardware
1.2. Generating the Design x
1.2.1. Procedure 1.2.2. Design Example Parameters
1.3. Compiling and Simulating the Design x
1.3.1. Procedure 1.3.2. Testbench
1.3.1. Procedure x
1.3.1.1. Updating PHY IP Design File Names
1.4. Changing Target Device in Hardware Design Example x
1.4.1. Procedure
1.5. Compiling and Testing the Design in Hardware x
1.5.1. Procedure 1.5.2. Hardware Setup
2. 10GBASE-R Ethernet Design Example x
2.1. Features 2.2. Hardware and Software Requirements 2.3. Functional Description 2.4. Simulation 2.5. Hardware Testing 2.6. Interface Signals 2.7. Configuration Registers
2.3. Functional Description x
2.3.1. Design Components 2.3.2. Clocking and Reset Scheme
2.5. Hardware Testing x
2.5.1. Test Cases 2.5.2. Configuring FIFO Depth for Avalon® Streaming Loopback 2.5.3. Running Avalon® Streaming Loopback Test Case with Jumbo Ethernet Packets
3. 10M/100M/1G/2.5G/10G Ethernet Design Example x
3.1. Features 3.2. Hardware and Software Requirements 3.3. Functional Description 3.4. Simulation 3.5. Hardware Testing 3.6. Interface Signals 3.7. Configuration Registers
3.3. Functional Description x
3.3.1. Design Components 3.3.2. Clocking Scheme 3.3.3. Reset Scheme 3.3.4. Timing Constraints
3.5. Hardware Testing x
3.5.1. Test Procedure
4. 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature x
4.1. Features 4.2. Hardware and Software Requirements 4.3. Functional Description 4.4. Simulation 4.5. Hardware Testing 4.6. Interface Signals 4.7. Configuration Registers
4.3. Functional Description x
4.3.1. Design Components 4.3.2. Clocking Scheme 4.3.3. Reset Scheme 4.3.4. Timing Constraints
4.4. Simulation x
4.4.1. Test Case—Design Example with the IEEE 1588v2 Feature
4.5. Hardware Testing x
4.5.1. Test Procedure
5. 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature x
5.1. Features 5.2. Hardware and Software Requirements 5.3. Functional Description 5.4. Simulation 5.5. Hardware Testing 5.6. Interface Signals 5.7. Configuration Registers
5.3. Functional Description x
5.3.1. Design Components 5.3.2. Clocking Scheme 5.3.3. Reset Scheme 5.3.4. Timing Constraints
5.4. Simulation x
5.4.1. Test Case—Design Example with the IEEE 1588v2 Feature
5.5. Hardware Testing x
5.5.1. Changing to SFP+ Setting 5.5.2. Test Procedure
6. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example x
6.1. Features 6.2. Hardware and Software Requirements 6.3. Functional Description 6.4. Simulation 6.5. Hardware Testing 6.6. Interface Signals 6.7. Configuration Registers
6.3. Functional Description x
6.3.1. Design Components 6.3.2. Clocking Scheme 6.3.3. Reset Scheme
6.4. Simulation x
6.4.1. Test Case—Design Example with the IEEE 1588v2 Feature 6.4.2. Test Case—Design Example without the IEEE 1588v2 Feature
6.5. Hardware Testing x
6.5.1. Test Procedure
7. Interface Signals Description x
7.1. Clock and Reset Interface Signals 7.2. Avalon® Memory-Mapped Interface Signals 7.3. Avalon® Streaming Interface Signals 7.4. PHY Interface Signals 7.5. Status Interface 7.6. IEEE 1588v2 Timestamp Interface Signals 7.7. Packet Classifier Interface Signals 7.8. TOD Interface Signals
8. Configuration Registers Description x
8.1. Register Access Definition 8.2. Low Latency Ethernet 10G MAC 8.3. PHY 8.4. Transceiver Reconfiguration 8.5. TOD
8.3. PHY x
8.3.1. 1G/2.5G/5G/10G Multi-rate PHY
1. Quick Start Guide
2. 10GBASE-R Ethernet Design Example
3. 10M/100M/1G/2.5G/10G Ethernet Design Example
4. 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature
5. 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature
6. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example
7. Interface Signals Description
8. Configuration Registers Description
9. Low Latency Ethernet 10G MAC Intel® Stratix® 10 FPGA IP Design Example User Guide Archives
10. Document Revision History for the Low Latency Ethernet 10G MAC Intel® Stratix® 10 FPGA IP Design Example User Guide

10. Document Revision History for the Low Latency Ethernet 10G MAC Intel® Stratix® 10 FPGA IP Design Example User Guide

Document Version Intel® Quartus® Prime Version IP Version Changes
2023.12.14 23.3 22.0.3
  • Updated frequency settings in Hardware Testing topic for 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example.
  • Updated frequency settings in Hardware Testing topic for 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature.
2023.10.02 23.3 22.0.3 Updated QSFP28 IF1 frequency settings in Hardware Testing topic for 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature.
2023.04.10 23.1 19.3.0 Updated Hardware and Software Requirements topic and Hardware Testing topic for the following design example:
  • 10GBASE-R Ethernet Design Example
  • 10M/100M/1G/2.5G/10G Ethernet Design Example
  • 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example
2023.02.16 21.2 19.3.0 Updated Hardware Testing topic for 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature.
2022.01.11 21.2 19.3.0 Updated Figure: Clocking Scheme for 10M/100M/1G/2.5G/10G Ethernet Design Example to correct input and output clock for PLL.
2021.10.22 21.2 19.3.0
  • Updated reference to target device 1SX280HU1F50E2VG to 1SG280HU1F50E2VG.
  • Updated the description and steps to Changing Target Device in Hardware Design Example and Procedure in the Quick Start Guide chapter.
  • Removed references to NCSim simulator throughout the document.
2020.11.30 19.3 19.3.0 Updated the 10GBASE-R Ethernet Design Example chapter:
  • Updated Figure: Clocking and Reset Scheme for 10GBASE-R Design Example
  • Updated Figure: Interface Signals of the 10GBASE-R Ethernet Design Example
  • Updated for latest branding standards.
2020.09.28 19.3 19.3.0 Updated the 10GBASE-R Ethernet Design Example chapter:
  • Added new topics:
    • Configuring FIFO Depth for Avalon® Streaming Loopback.
    • Running Avalon® Streaming Loopback Test Case with Jumbo Ethernet Packets.
  • Updated the description for FIFO in Table: Design Components in the 10GBASE-R Ethernet Design Example chapter.
  • Made editorial edits throughout the document.
2020.06.30 19.3 19.3.0 Updated Figure: Clocking Scheme for 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example With IEEE 1588v2 Feature to correct the frequency values for latency_sclk, TOD clk_sampling, and tx_serial_clk.
2019.12.13 19.3 19.3.0
  • Added a note to the procedure steps in the Compiling and Simulating the Design section.
  • Added a new Topic—Updating PHY IP Design File Names.
  • Updated the procedure steps in the Changing Target Device in Hardware Design Example section.
  • Updated for latest Intel® branding standards.
2019.10.02 19.3 19.3.0
  • Added new topic—Changing Target Device in Hardware Design Example.
  • Updated references to Intel® Stratix® 10 GX Signal Integrity H-Tile (ES) Development Kit as Intel® Stratix® 10 GX Signal Integrity H-Tile (Production) Development Kit.
  • Updated the Generating the Design topic to add a note to Step 8.
  • Updated Figure: Example Design Tab.
  • Updated the Hardware and Software Requirements topics for all design example chapters
  • Updated Table: 1G/2.5G/5G/10G Multi-rate PHY Register Definitions.
2019.07.01 19.2 19.2.0
  • Updated all references to Stratix 10 H-Tile GX Transceiver Signal Integrity Development Kit to Stratix 10 GX Signal Integrity H-Tile (ES) Development Kit.
  • Updated Table: Parameters in the Example Design Tab:
    • Updated the parameter name Example Design Files for Simulation or Synthesis to Example Design Files.
    • Updated the parameter name Enable NPDME support to Enable Native PHY Debug Master Endpoint (NPDME).
  • Updated Figure: Example Design Tab.
  • Updated Table: Design Components of the 10GBASE-R Ethernet design example to update the description for FIFO.
  • Made editorial edits through out the document.
2019.04.30 19.1 19.1
  • Updated Table: Parameters in the Example Design Tab to update the description for Select Board.
  • Updated Figure: Block Diagram of the Hardware Setup.
  • Updated the hardware requirements in the Hardware and Software Requirements topics for all design examples.
2019.04.24 19.1 19.1
  • Changed Altera Debug Master Endpoint (ADME) to Native PHY Debug Master Endpoint (NPDME).
2018.09.24 18.0 18.0
  • Updated Table: Parameters in the Example Design Tab to include a note to parameters Enable NPDME support and Analog Voltage to clarify that these options are only available from Intel Quartus Prime Pro Edition version 17.0 onwards.
  • Removed Debug Signals topic from the 10GBASE-R Ethernet Design Example for Intel Stratix 10 Devices chapter.
  • Updated the Configuration Registers Description chapter:
    • Added the following topics:
      • Register Access Definition
      • 1G/2.5G/5G/10G PHY
    • Removed the Register Map topic.
  • Added Timing Constraints topic to the following design example chapters:
    • 10M/100M/1G/2.5G/10G Ethernet Design for Intel Stratix 10 Devices
    • 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature for Intel Stratix 10 Devices
    • 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature for Intel Stratix 10 Devices
2018.08.08 18.0 18.0
  • Updated Table: Hardware Test Cases of the 10GBASE-R Ethernet Design Example for Intel Stratix 10 Devices chapter to update the description for source gen_conf.tcl command of the SFP+ loopback test case.
  • Updated Figure: Interface Signals of the 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example.
  • Updated Table: Avalon-MM Interface Signals:
    • Added the following signals:
      • csr_mch_write
      • csr_mch_writedata
      • csr_mch_read
      • csr_mch_readdata
      • csr_mch_address
      • csr_mch_waitrequest
    • Removed the following signals:
      • csr_write
      • csr_writedata
      • csr_read
      • csr_readdata
      • csr_address
      • csr_waitrequest
2018.05.16 18.0 18.0
  • Updated for latest branding standards.
  • Made editorial text updates throughout the document.
  • Added support for Xcelium simulator.
  • Renamed the document as Low Latency Ethernet 10G MAC Intel Stratix 10 FPGA IP Design Example User Guide.
  • Updated the procedure steps of the Compiling and Testing the Design in Hardware topic.
  • Updated the Test Cases topic of the 10BASE-R Ethernet Design Example for Intel Stratix 10 Devices chapter.
  • Updated the 10G USXGMII Ethernet Design Example for Intel Stratix 10 Devices chapter:
    • Updated all references to 10G USXGMII references to 10M/100M/1G/2.5G/5G/10G (USXGMII).
    • Added 1588v2 feature support to the 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet design example chapter.
    • Added new Simulation topics:
      • Test Case—Design Example with the IEEE 1588v2 Feature
      • Test Case—Design Example without the IEEE 1588v2 Feature
    • Updated Table: Command Parameters.
    • Updated Table: Register Map to include byte offset for Native PHY Reconfiguration block.
  • Updated the Test Procedure topic of the 10M/100M/1G/2.5G Ethernet Design Example for Intel Stratix 10 Devices chapter.
  • Updated the Hardware and Software Requirements, Design Components, and Hardware Testing topics for all design example chapters.
  • Updated the following Tables:
    • Directory and File Description
    • Parameters in the Example Design Tab
    • Clock and Reset Interface Signals
  • Updated the following Figures:
    • Block Diagram—10GBASE-R Ethernet Design Example
    • Clocking and Reset Scheme for 10GBASE-R Design Example
    • Reset Scheme for 10M/100M/1G/2.5G/10G Ethernet Design Example
    • Block Diagram—1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature
    • Block Diagram—1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature
    • Reset Scheme for 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature
    • Clocking Scheme for 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example Without IEEE 1588v2 Feature
    • Interface Signals of the 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example
2018.03.28 17.1 17.1
  • Updated Figure: Clocking Scheme for 10G USXGMII Ethernet Design Example.
Date Version Changes
November 2017 2017.12.04
  • Updated Figure: Example Design Tab.
  • Added Hardware Testing, Test Cases, and Debug Signals topics for the 10BASE-R Ethernet Design Examplechapter.
  • Updated the description in the Hardware Testing topic for the following Ethernet design examples:
    • 10M/100M/1G/2.5G/10G
    • 1G/2.5G with IEEE 1588v2 Feature
    • 1G/2.5G/10G with IEEE 1588v2 Feature
    • 10G USXGMII
  • Added Changing to SFP+ Setting topic for 1G/2.5G/10G Ethernet design example with IEEE 1588v2 Feature chapter.
  • Made editorial text and structure update.
2017.11.06
  • Rebranded as Intel.
  • Renamed the document as .
  • Updated the Quick Start Guide section:
    • Updated the "Directory and File Description" table.
    • Removed rtl directory from the "Directory and File Description" table.
    • Changed heading title of the Design Parameters Description topic to Design Example Parameters.
    • Updated the "Parameters in the Example Design Tab" table:
      • Added Analog Voltage and Enable ADME support parameters and descriptions.
      • Updated the descriptions for Generate File Format and Select Board parameters.
    • Updated the Procedure subtopic under the Compiling and Simulating the Design topic.
    • Updated the Procedure subtopic under the Compiling and Testing the Design in Hardware topic.
  • Updated entire 1G/2.5G/10G Ethernet Design Example chapter to 10M/100M/1G/2.5G/10G Ethernet Design Example chapter.
  • Updated the 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature for Intel Stratix 10 Devices topic.
  • Added 10G USXGMII Ethernet Design Example chapter.
  • Added 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature chapter.
  • Updated the description in the "Features" topic for the 10GBASE-R, 10M/100M/1G/2.5G/10G, 1G/2.5G with IEEE 1588v2 Feature, 1G/2.5G, 1G/2.5G/10G with IEEE 1588v2 Feature, and 10G USXGMII Ethernet design examples.
  • Updated the "Design Component" table for the 10GBASE-R, 10M/100M/1G/2.5G/10G, 1G/2.5G with IEEE 1588v2 Feature, 1G/2.5G, 1G/2.5G/10G with IEEE 1588v2 Feature, and 10G USXGMII Ethernet design examples.
  • Updated the Hardware and Software Requirements topic for the 10GBASE-R, 10M/100M/1G/2.5G/10G, 1G/2.5G with IEEE 1588v2 Feature, 1G/2.5G, 1G/2.5G/10G with IEEE 1588v2 Feature, and 10G USXGMII Ethernet design examples.
  • Updated Figures:
    • Example Design Tab
    • Block Diagram of the Hardware Setup
    • Block Diagram—10GBASE-R Design Example
    • Clocking and Reset Scheme for 10GBASE-R Design Example
    • Clocking Scheme for 10M/100M/1G/2.5G/10G Ethernet Design Example
    • Reset Scheme for 10M/100M/1G/2.5G/10G Ethernet Design Example
    • Clocking Scheme for 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature
    • Reset Scheme for 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature
    • Interface Signals of the 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature
    • Clocking Scheme for 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature
    • Reset Scheme for 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature
    • Interface Signals of the 1G/2.5G/10G Ethernet Design Examples with IEEE 1588v2 Feature
    • Clocking Scheme for 10G USXGMII Ethernet Design Example
    • Reset Scheme for 10G USXGMII Ethernet Design Example
    • Interface Signals of the 10G USXGMII Ethernet Design Example
  • Updated the "RX Configuration and Status Registers" table: Updated the HW Reset value for 0x2004 from 1518 to 0x5EE(1518).
  • Updated the Configuration Registers Description chapter:
    • Updated the PHY topic:
      • Removed the "PMA Registers", "PCS Registers", and "Stratix 10 GMII PCS Registers" tables.
      • Added Register Map and Register Definitions subtopics.
    • Merged the 10G TOD and 1G TOD topics with the Master TOD and changed heading title to ToD.
    • Updated "ToD Register Map" table: Added bits information.
  • Made text updates throughout the document.
May 2017 2017.05.08
  • Updated the Procedure topic in the Quick Start Guide chapter.
  • MAC Design Example User Guide for Intel Stratix 10Added the Compiling and Testing the Design in Hardware topic in the Quick Start Guide chapter.
  • Updated the Software Requirements topic in the 10GBASE-R Design Example for Stratix 10 chapter.
  • Updated the Register Map table in the 10GBASE-R Design Example for Stratix 10 chapter.
  • Updated the Clocking and Reset Scheme for 10GBASE-R Design Example figure.
  • Added 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature chapter.
  • Added 1G/2.5G/10G Ethernet Design Example chapter.
  • Added Interface Signals Description for Stratix 10 chapter.
  • Added Configuration Registers Description for Stratix 10 chapter.
  • Updated the description for csr_clk signal in the Clock and Reset Interface Signals table.
  • Intel FPGA LowEditorial fix to the Interface Signals and Configuration Registers topics for 10GBASE-R Design Example chapter.
  • Updated document part number from UG-20016-S10 to UG-20073.
October 2016 2016.10.31 Initial release.
Level Two Title