F-Tile Ethernet Intel® FPGA Hard IP User Guide

ID 683023
Date 7/08/2024
Public
Document Table of Contents

9.2.3. PTP Asymmetry Delay Reconfiguration Interface

Table 78.  PTP Asymmetry Reconfiguration InterfaceThe signals in this interface are clocked by the i_reconfig_clk clock and reset by the i_reconfig_reset signal of the PTP tile adapter. This clock and reset are used for all the reconfiguration interfaces in the IP core.
Port Name Width Description

i_reconfig_ptp_asym_addr[16:0]

17 bits

Byte address bus for PTP asymmetry delay and status registers.

i_reconfig_ptp_asym_read

1 bit

Read request signal for PTP asymmetry delay and status registers.

i_reconfig_ptp_asym_write

1 bit

Write request signal for PTP asymmetry delay and status registers.

i_reconfig_ptp_asym_byteenable[3:0]

4 bits

Byte enable for PTP asymmetry read and write request signals.

o_reconfig_ptp_asym_readdata[31:0]

32 bits

Read data from reads to PTP asymmetry delay and status registers.

o_reconfig_ptp_asym_readdata_valid

1 bit

When set, read data from PTP asymmetry delay and status registers is valid.

i_reconfig_ptp_asym_writedata[31:0]

32 bits

Write data for PTP asymmetry delay and status registers.

o_reconfig_ptp_asym_waitrequest

1 bit

Avalon® memory-mapped interface stalling signal for operations on PTP asymmetry delay and status registers.