F-Tile Ethernet Intel® FPGA Hard IP User Guide

Download PDF
ID 683023
Date 12/19/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Overview 2. Getting Started 3. F-Tile Ethernet Intel® FPGA Hard IP Parameters 4. Functional Description 5. Clocks 6. Resets 7. Interface Overview 8. Configuration Registers 9. Supported Modules and IPs 10. Supported Tools 11. F-Tile Ethernet Intel® FPGA Hard IP User Guide Archives 12. Document Revision History for F-Tile Ethernet Intel® FPGA Hard IP User Guide
1. Overview x
1.1. Ethernet System in F-Tile Overview 1.2. F-Tile Ethernet Intel® FPGA Hard IP Overview
1.2. F-Tile Ethernet Intel® FPGA Hard IP Overview x
1.2.1. Device Family Support 1.2.2. Device Speed Grade Support 1.2.3. Resource Utilization 1.2.4. Round-trip Latency 1.2.5. Release Information
2. Getting Started x
2.1. Installing and Licensing F-Tile Ethernet Intel® FPGA Hard IP Cores 2.2. Specifying the IP Core Parameters and Options 2.3. Reference and System PLL Clock for your IP Design 2.4. Generated File Structure 2.5. Generating Tile Files 2.6. IP Core Testbenches
2.4. Generated File Structure x
2.4.1. Generating IP-XACT File
4. Functional Description x
4.1. Datapath Description 4.2. F-Tile Ethernet Intel® FPGA Hard IP MAC 4.3. PCS, OTN, and FlexE Modes 4.4. Precision Time Protocol 4.5. Auto-Negotiation and Link Training
4.2. F-Tile Ethernet Intel® FPGA Hard IP MAC x
4.2.1. MAC TX Datapath 4.2.2. MAC RX Datapath 4.2.3. Congestion and Flow Control Using PAUSE or Priority Flow Control (PFC) 4.2.4. Link Fault Signaling 4.2.5. Order of Ethernet Transmission
4.2.1. MAC TX Datapath x
4.2.1.1. TX Preamble, Start, and SFD Insertion 4.2.1.2. Source Address Insertion 4.2.1.3. Length/Type Field Processing 4.2.1.4. Frame Padding 4.2.1.5. Frame Check Sequence (CRC-32) Insertion 4.2.1.6. Inter-Packet Gap Generation and Insertion 4.2.1.7. TX Packing Logic
4.2.2. MAC RX Datapath x
4.2.2.1. RX Preamble Processing 4.2.2.2. RX Strict SFD Checking 4.2.2.3. RX FCS Checking 4.2.2.4. RX Malformed Packet Handling 4.2.2.5. Removing PAD Bytes and FCS Bytes from RX Frames 4.2.2.6. RX Undersized Frames, Oversized Frames, and Frames with Length Errors 4.2.2.7. Inter-Packet Gap
4.2.3. Congestion and Flow Control Using PAUSE or Priority Flow Control (PFC) x
4.2.3.1. Conditions Triggering XOFF Frame Transmission 4.2.3.2. Conditions Triggering XON Frame Transmission 4.2.3.3. Pause Control and Generation Interface 4.2.3.4. Pause Control Frame Filtering
4.3. PCS, OTN, and FlexE Modes x
4.3.1. PCS Mode 4.3.2. OTN Mode 4.3.3. FlexE Mode
4.4. Precision Time Protocol x
4.4.1. Features 4.4.2. PTP Timestamp Accuracy 4.4.3. PTP Client Flow 4.4.4. RX Virtual Lane Offset Calculation for No FEC Variants 4.4.5. Virtual Lane Order and Offset Values 4.4.6. UI Adjustment 4.4.7. Reference Time Interval 4.4.8. Minimum and Maximum Reference Time (TAM) Interval for UI Measurement (Hardware) 4.4.9. UI Value and PMA Delay 4.4.10. Routing Delay Adjustment for Advanced Timestamp Accuracy Mode
4.4.3. PTP Client Flow x
4.4.3.1. PTP TX Client Flow 4.4.3.2. PTP RX Client Flow
4.4.6. UI Adjustment x
4.4.6.1. TX UI Adjustment 4.4.6.2. RX UI Adjustment
5. Clocks x
5.1. Clock Connections in Single Instance Operation 5.2. Clock Connections in Multiple Instance Operation 5.3. Clock Connections in MAC Asynchronous FIFO Operation 5.4. Clock Connections in PTP-Based Synchronous and Asynchronous Operation 5.5. Clock Connections in Synchronous Ethernet Operation 5.6. Custom Cadence
6. Resets x
6.1. Reset Signals 6.2. Reset Sequence
7. Interface Overview x
7.1. Status Interface 7.2. TX MAC Avalon ST Client Interface 7.3. RX MAC Avalon ST Aligned Client Interface 7.4. TX MAC Segmented Client Interface 7.5. RX MAC Segmented Client Interface 7.6. MAC Flow Control Interface 7.7. PCS Mode TX Interface 7.8. PCS Mode RX Interface 7.9. FlexE and OTN Mode TX Interface 7.10. FlexE and OTN Mode RX Interface 7.11. Custom Rate Interface 7.12. Deterministic Latency Interface 7.13. 32-bit Soft CWBIN Counters 7.14. Reconfiguration Interfaces 7.15. Precision Time Protocol Interface
7.2. TX MAC Avalon ST Client Interface x
7.2.1. TX MAC Avalon ST Client Interface with Disabled Preamble Passthrough 7.2.2. TX MAC Avalon ST Client Interface with Enabled Preamble Passthrough 7.2.3. Using MAC Avalon ST skip_crc Signal to Control Source Address, PAD, and CRC Insertion 7.2.4. Using MAC Avalon ST i_tx_error Signal to Mark Packets Invalid
7.3. RX MAC Avalon ST Aligned Client Interface x
7.3.1. RX MAC Avalon ST Client Interface with Disabled Preamble Passthrough 7.3.2. RX MAC Avalon ST Client Interface with Enabled Passthrough and RX CRC Forwarding 7.3.3. RX MAC Adapter Limitations 7.3.4. RX MAC Avalon ST Client Interface Status
7.4. TX MAC Segmented Client Interface x
7.4.1. TX MAC Segmented Client Interface with Disabled Preamble Passthrough 7.4.2. TX MAC Segmented Client Interface with Enabled Preamble Passthrough 7.4.3. Using MAC Segmented skip_crc Signal to Control Source Address, PAD, and CRC Insertion 7.4.4. Using MAC Segmented i_tx_mac_error to Mark Packets Invalid
7.5. RX MAC Segmented Client Interface x
7.5.1. RX MAC Segmented Client Interface with Disabled Preamble Passthrough 7.5.2. RX MAC Segmented Client Interface with Enabled Passthrough and RX CRC Forwarding 7.5.3. RX MAC Segmented Client Interface Status and Errors
7.12. Deterministic Latency Interface x
7.12.1. Deterministic Latency Measurement
7.14. Reconfiguration Interfaces x
7.14.1. Ethernet Reconfiguration Interfaces 7.14.2. Transceiver Reconfiguration Interfaces
7.15. Precision Time Protocol Interface x
7.15.1. Time-of-Day Interface 7.15.2. TX 2-Step Timestamp Interface 7.15.3. TX 1-Step Timestamp Interface 7.15.4. RX Timestamp Interface 7.15.5. PTP Status Interface 7.15.6. PTP Tile Interface
7.15.3. TX 1-Step Timestamp Interface x
7.15.3.1. PTP Field Offset for 1-Step Operation
8. Configuration Registers x
8.1. Ethernet Avalon® Memory-Mapped Interface Address Space 8.2. Transceiver Avalon® Memory-Mapped Interface Address Space
8.1. Ethernet Avalon® Memory-Mapped Interface Address Space x
8.1.1. Ethernet Hard IP Core CSRs 8.1.2. FEC and Transceiver Control and Status Registers
9. Supported Modules and IPs x
9.1. F-Tile Auto-Negotiation and Link Training For Ethernet Intel® FPGA IP 9.2. PTP Tile Adapter
9.1. F-Tile Auto-Negotiation and Link Training For Ethernet Intel® FPGA IP x
9.1.1. Overview 9.1.2. Release Information 9.1.3. Functional Description 9.1.4. Parameters 9.1.5. Clocks and Resets 9.1.6. Registers
9.2. PTP Tile Adapter x
9.2.1. Overview 9.2.2. Clocks, Reset, and Interface Ports 9.2.3. PTP Asymmetry Delay Reconfiguration Interface 9.2.4. PTP Peer-to-Peer MeanPathDelay Reconfiguration Interface
10. Supported Tools x
10.1. F-Tile Channel Placement Tool 10.2. Ethernet Toolkit Overview
10.2. Ethernet Toolkit Overview x
10.2.1. Features
1. Overview
2. Getting Started
3. F-Tile Ethernet Intel® FPGA Hard IP Parameters
4. Functional Description
5. Clocks
6. Resets
7. Interface Overview
8. Configuration Registers
9. Supported Modules and IPs
10. Supported Tools
11. F-Tile Ethernet Intel® FPGA Hard IP User Guide Archives
12. Document Revision History for F-Tile Ethernet Intel® FPGA Hard IP User Guide

4.4. Precision Time Protocol

The Precision Time Protocol (PTP) provides 1588 Precision Time Protocol timestamp information as defined in the IEEE 1588-2008 Precision Clock Synchronization Protocol for Networked Measurement and Control System Standard. 1588 PTP logic generates 96-bit timestamp information for transmitted and received packets. The generated timestamps represent the time when the first bit after the Start of Frame Delimiter (SFD) byte crosses the FPGA serial pins (Medium Dependent Interface, MDI).

In a 1-step TX operation, the IP core updates the PTP message content on-the-fly during the packet transmission. The update includes a 96-bit 1588 v2 format timestamp, updated correction field with residence time, asymmetry delay, and the peer-to-peer mean path delay. The IP core sets the UDP/IPv4 checksum field to zero and updates extended bytes to a correct checksum of the UDP/IPv6 packets.

A fingerprint can accompany a 1588 PTP packet. You can use this information to associate returned TX timestamp to the transmitted PTP packet. If you provide fingerprint information, the IP core passes it through unchanged.

The IP core connects to a time-of-day (TOD) module that continuously provides the current time of day based on the input clock frequency.

Once PTP is enabled, you must instantiate PTP tile adapter module (eth_ptp_adpt_f) per each F-tile. A single PTP tile adapter instance accommodates all PTP variants on the same F-tile. You must manually connect the bus interface between the PTP tile adapter and the associated F-Tile Ethernet Intel® FPGA Hard IP For more information about the PTP tile adapter, refer to PTP Tile Adapter.
Note: The PTP tile adapter requires dedicated use of EMIB 6 and EMIB 7 channels.

For proper connectivity between the F-Tile Ethernet Intel® FPGA Hard IP in PTP mode and the supporting logic blocks, refer to the F-Tile Ethernet Intel® FPGA Hard IP Design Example.


Section Content
Features
PTP Timestamp Accuracy
PTP Client Flow
RX Virtual Lane Offset Calculation for No FEC Variants
Virtual Lane Order and Offset Values
UI Adjustment
Reference Time Interval
Minimum and Maximum Reference Time (TAM) Interval for UI Measurement (Hardware)
UI Value and PMA Delay
Routing Delay Adjustment for Advanced Timestamp Accuracy Mode

Related Information
Level Two Title