EDA Tool Support Resource Center
Resources for EDA tools supported in the Intel® Quartus® Prime Software.
The Intel® Quartus® Prime Edition Software supports interfaces with third-party EDA tools throughout the design flow. For more information about Intel® FPGA EDA partnerships, refer to the EDA Partners page.
For documentation and training on EDA tool support in the Intel® Quartus® Prime Edition Software, refer to the appropriate resource center:
- I/O Management and Board Development Support Center
- Synthesis and Netlist Viewers Resource Center
- Questa*-Intel® FPGA Edition Quick-Start: Intel® Quartus® Prime Pro Edition
- ModelSim* - Intel® FPGA Edition Simulation Quick-Start: Intel® Quartus® Prime Pro Edition
For additional information on using EDA tools with the Quartus Prime or Quartus II software, refer to the following topics from Help:
- Intel® Quartus® Prime Pro Edition Software Interface
- Using Quartus Prime Software with Other EDA Tools
- Specifying EDA Tool Settings
- Creating and Instantiating Intel® Quartus® Prime IP Cores in Other EDA Tools
- Board-Level Tools
- BSDL (Boundary-Scan Description Language)
- Board-level Signal Integrity Analysis
- Mentor Graphics® TAU (Timing Analysis)
- Simulation Model Support
- Synthesis Tools
- Mentor Graphics Precision RTL Synthesis
- Mentor Graphics DK Design Suite
- Synopsys® Synplify Software with the Intel® Quartus® Prime Software
- Simulation Tools
- Supported Simulation Tools
- Formal Verification Tools
- Cadence Incisive Conformal
- Physical Synthesis Tools
- Mentor Graphics Precision Synthesis