New and Updated Design Assistant Rules for 22.1 Release Newly Added Design Assistant Rules Unsynchronized Intra-Clock Forced Synchronizer INI Variables Set and Not Used During Compile Ignored or Overridden Constraints Empty Collection Collection Filter Matching Multiple Types Updated Design Assistant Rules Nets Driving both Reset and Clock Enable Signals Reset Nets with Polarity Conflict Hierarchical Tree Duplication was Shallower than Possible Hierarchical Tree Duplication was Shallower than Requested CDC-50001: 1-Bit Asynchronous Transfer Not Synchronized CDC-50002: 1-Bit Asynchronous Transfer with Insufficient Constraints CDC-50003: CE-Type CDC Transfer with Insufficient Constraints CDC-50004: MUX-type CDC Transfer with Insufficient Constraints CDC-50005: CDC Bus Constructed with Multi-bit Synchronizer Chains of Different Lengths CDC-50006: CDC Bus Constructed with Unsynchronized Registers CDC-50007: CDC Bus Constructed with Multi-bit Synchronizer Chains with Insufficient Constraints CDC-50008: CDC Bus Constructed with Multi-bit Synchronizer Chains CDC-50011: Combinational Logic Before Synchronizer Chain CDC-50012: Multiple Clock Domains Driving a Synchronizer Chain CDC-50101: Intra-Clock False Path Synchronizer CDC-50102: Synchronizer after CDC Topology with Control Signal CDC-50103: Unsynchronized Intra-Clock Forced Synchronizer CLK-30026: Missing Clock Assignment CLK-30027: Multiple Clock Assignments Found CLK-30028: Invalid Generated Clock CLK-30029: Invalid Clock Assignments CLK-30030: PLL Setting Violation CLK-30031: Input Delay Assigned to Clock CLK-30032: Improper Clock Targets CLK-30033: Invalid Clock Group Assignment CLK-30034: Clock Pairs Missing Logically Exclusive Clock Group Assignment CLK-30035: Clock Pairs Missing Physically Exclusive Clock Group Assignment CLK-30042: Incorrect Clock Group Type FLP-10000: Physical RAM with Utilization Below Threshold FLP-10100: Large Multipliers are Decomposed FLP-10500: Non Driving Top Level Inputs Found FLP-40001: Congested Placement Region FLP-40002: Very Small Routing Regions FLP-40003: Narrow Region FLP-40005: Congested Routing Region FLP-40006: Pipelining Registers That Might Be Recoverable LNT-30010: Nets Driving both Reset and Clock Enable Signals LNT-30011: Design Contains Combinational Loops LNT-30017: Register Output Driving Its Own Asynchronous Control Signal Directly or Through Combinational Logic LNT-30020: Same Signal Source Drives Synchronous and Asynchronous Ports of the Same Register LNT-30021: Same Signal Source Drives More Than One Asynchronous Port of a Register LNT-30022: Same Signal Source Drives Clock Port and Another Port of a Register LNT-30023: Reset Nets with Polarity Conflict LNT-30024: LUT With More Than 1 Input Driving Clock Pins LNT-30025: LUT With More Than 1 Input Driving Asynchronous Pins LNT-30026: LUT With More Than 1 Input Driving Primary Device Output Ports PRJ-10000: INI Variables Used During Compile PRJ-10001: INI Variables Set and Not Used During Compile RDC-50001: Reconvergence of Multiple Asynchronous Reset Synchronizers in Different Reset Domains RDC-50002: Reconvergence of Multiple Asynchronous Reset Synchronizers in a Common Reset Domain RES-10201: Power Up Don't Care Setting May Prevent Retiming RES-10202: Register Power-Up Settings Conflict with Device Settings RES-10203: Registers with Initial Conditions RES-10204: Reset Release Instance Count Check RES-30132: Registers May Not Be Properly Reset RES-30133: Embedded Memory Blocks with Initialized Content That Might be Affected by Spurious Writes RES-30134: Registers Not Reachable from Reset Release IP RES-50001: Asynchronous Reset Is Not Synchronized RES-50002: Asynchronous Reset is Insufficiently Synchronized RES-50003: Asynchronous Reset with Insufficient Constraints RES-50004: Multiple Asynchronous Resets within Reset Synchronizer Chain RES-50005: RAM Control Signals Driven by Flip-Flops with Asynchronous Clears RES-50010: Reset Synchronizer Chains with Constant Output RES-50101: Intra-Clock False Path Reset Synchronizer TMC-10107: Maximum Fan-out for Signal TMC-10115: High Fan-out Signal TMC-20001: Timing Paths with Hold Slack Exceeding Threshold TMC-20002: Timing Paths with Removal Slack Exceeding Threshold TMC-20004: Timing Paths with Setup Slack Exceeding Threshold TMC-20005: Timing Paths with Recovery Slack Exceeding Threshold TMC-20006: Unregistered Partition Inputs TMC-20007: Unregistered Paths Between Partitions TMC-20010: Logic Level Depth TMC-20011: Missing Input Delay Constraint TMC-20012: Missing Output Delay Constraint TMC-20013: Partial Input Delay TMC-20014: Partial Output Delay TMC-20015: Inconsistent Min-Max Delay TMC-20016: Invalid Reference Pin TMC-20017: Loops Detected TMC-20018: Unsupported Latches Detected TMC-20019: Partial Multicycle Assignment TMC-20020: Invalid Multicycle Assignment TMC-20021: Partial Min-Max Delay Assignment TMC-20022: Incomplete I/O Delay Assignment TMC-20023: Invalid Set Net Delay Assignment TMC-20024: Synchronous Data Delay Assignment TMC-20025: Ignored or Overridden Constraints TMC-20026: Empty Collection Due To Unmatched Filter TMC-20027: Collection Filter Matching Multiple Types TMC-20050: RAM Control Signals Driven by LUTs or ALMs instead of DFFs TMC-20051: RAM Control Signals Driven by High Fan-Out Net TMC-20052: Paths with Post Synthesis Inferred Latches TMC-20053: DSP Inputs Driven by High Fan-Out Net TMC-20100: Latch Loops Detected TMC-20200: Paths Failing Setup Analysis with Impossible Requirements TMC-20201: Paths Failing Setup Analysis with High Clock Skew TMC-20202: Paths Failing Setup Analysis with High Logic Delay TMC-20203: Paths Failing Setup Analysis with High Fabric Interconnect Delay TMC-20204: Endpoints of Paths Failing Setup Analysis with Retiming Restrictions TMC-20205: Endpoints of Paths Failing Setup Analysis with Explicit Power-Up States that Restrict Retiming TMC-20206: DSP Blocks with Unregistered Outputs that are the Source of Paths Failing Setup Analysis TMC-20207: DSP Blocks with Unregistered Inputs that are the Destination of Paths Failing Setup Analysis TMC-20208: RAM Blocks with Unregistered Outputs that are the Source of Paths Failing Setup Analysis TMC-20209: Paths Failing Setup Analysis with High Routing Delay due to Congestion TMC-20210: Paths Failing Setup Analysis with High Routing Delay Added for Hold TMC-20212: Paths Failing Setup Analysis with Global Routing in Data Path TMC-20213: Paths Failing Setup Analysis with Locally Routed Clock TMC-20214: Buses with Incoming Paths Failing Setup Analysis with Multiple Sequential Adder Chains TMC-20215: Buses with Incoming Paths Failing Setup Analysis with Multipliers Implemented in Logic TMC-20216: Paths Failing Setup Analysis with Inferred-RAM Shift Register Endpoints TMC-20217: Paths Failing Setup Analysis with Clock-As-Data TMC-20219: DSP Blocks with Restricted Fmax below Required Fmax TMC-20220: RAM Blocks with Restricted Fmax below Required Fmax TMC-20221: Nodes Failing Minimum Pulse Width Due to Clock Pulse Collapse TMC-20250: Paths Failing Setup Analysis within Platform Designer Interconnect TMC-20251: Paths Failing Setup Analysis within Platform Designer Interconnect Burst Adapter TMC-20312: Paths Failing Hold Analysis with Global Routing in Data Path TMC-20313: Paths Failing Hold Analysis with Locally Routed Clock TMC-20500: Hierarchical Tree Duplication was Shallower than Possible TMC-20501: Hierarchical Tree Duplication was Shallower than Requested TMC-20550: Automatically Selected Duplication Candidate Rejected for Placement Constraint TMC-20551: Automatically Selected Duplication Candidate Likely Requires More Duplication TMC-20552: User Selected Duplication Candidate was Rejected TMC-20601: Registers with High Immediate Fan-Out Tension TMC-20602: Registers with High Timing Path Endpoint Tension TMC-20603: Registers with High Immediate Fan-Out Span TMC-20604: Registers with High Timing Path Endpoint Span TMC-20605: Register Wirelut FO Check TMC-20712: Paths Failing Recovery Analysis with Global Routing in Data Path TMC-20713: Paths Failing Recovery Analysis with Locally Routed Clock TMC-20812: Paths Failing Removal Analysis with Global Routing in Data Path TMC-20813: Paths Failing Removal Analysis with Locally Routed Clock TMC-30041: Constraint with Invalid Clock Reference