Visible to Intel only — GUID: zpv1643004736261
Ixiasoft
Visible to Intel only — GUID: zpv1643004736261
Ixiasoft
12.4. Settings Managed by Nios® V Processor Board Support Package Editor
Sometimes these settings are specified automatically, by scripts, and sometimes explicitly, with Tcl commands. Either way, settings are always involved.
This section contains a complete list of available settings for BSPs and for Intel® FPGA-supported device drivers and software packages. It does not include settings for device drivers or software packages furnished by Intel partners or other third parties. If you are using a third-party driver or component, refer to the supplier's documentation.
Settings used in the Nios® V processor Board Support Package Editor are organized hierarchically, for logical grouping and to avoid name conflicts. Each setting's position in the hierarchy is indicated by one or more prefixes. A prefix is an identifier followed by a dot (.). For example, hal.enable_c_plus_plus is a hardware abstraction layer (HAL) setting, while ucosii.event_flag.os_flag_accept_en is a member of the event flag subgroup of MicroC/OS-II settings.
Setting names are case-insensitive.
Section Content
Overview of BSP Settings
Overview of Component and Driver Settings
Settings Reference