F-Tile SDI II Intel® Agilex™ FPGA IP Design Example User Guide

Download PDF
ID 710496
Date 1/28/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. F-Tile SDI II Intel® Agilex™ FPGA IP Design Example Quick Start Guide 2. Design Example Detailed Description 3. Document Revision History for the F-Tile SDI II Intel® Agilex™ Design Example User Guide
1. F-Tile SDI II Intel® Agilex™ FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. Generating the Design 1.3. Simulating the Design 1.4. Compiling and Testing the Design in Hardware 1.5. Design Example Parameters
2. Design Example Detailed Description x
2.1. Features 2.2. Hardware and Software Requirements 2.3. Functional Description 2.4. Simulation
2.3. Functional Description x
2.3.1. Design Components 2.3.2. Clocking Scheme
2.3.2. Clocking Scheme x
2.3.2.1. Clocking Scheme Component
2.4. Simulation x
2.4.1. Testbench Components 2.4.2. Test Description 2.4.3. Hardware Testing 2.4.4. Signal
2.4.3. Hardware Testing x
2.4.3.1. Parallel loopback 2.4.3.2. Serial loopback
1. F-Tile SDI II Intel® Agilex™ FPGA IP Design Example Quick Start Guide
2. Design Example Detailed Description
3. Document Revision History for the F-Tile SDI II Intel® Agilex™ Design Example User Guide

1.2. Generating the Design

Configure the SDI II Intel® FPGA IP parameter editor in the Intel® Quartus® Prime software to generate the design examples.
Figure 3. Generating the Design Flow
  1. Create an empty project targeting Intel® Agilex™ device family and select the desired device.
  2. In the IP Catalog, locate and double-click SDI II Intel FPGA IP. The IP Parameter Editor window appears.
  3. Specify a top-level name for your custom IP variation. The parameter editor saves the IP variation settings in a file named <your_ip>.ip or <your_ip>.qsys.
  4. On the Design Example tab, select the desired parameter for the design example. Select Simulation to generate the testbench, and select Synthesis to generate the hardware design example.
  5. For Target Development Kit, select the relevant FPGA development kit. You may change the target device using the Change Target Device parameter if your board revision does not match the grade of the default targeted device.
  6. Click Generate Example Design button to initiate the design generation.
Figure 4. Design Example Tab in SDI II IP Parameter Editor
Level Two Title