Visible to Intel only — GUID: djg1654228425418
Ixiasoft
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Intel Agilex® 7 F-Tile Devices
2. HDMI 2.1 Design Example (Support FRL = 1, Enable Active Video Protocol = None)
3. HDMI 2.1 Design Example with AXI4-stream Interface Enabled (Support FRL =1, Enable Active Video Protocol = AXIS-VVP Full)
4. Document Revision History for the F-Tile HDMI Intel® FPGA IP Design Example User Guide
2.1. Design Features
2.2. Hardware and Software Requirements
2.3. HDMI 2.1 RX-TX Retransmit Design Block Diagram
2.4. Design Parameters
2.5. Design Components
2.6. Design Software Flow
2.7. Clocking Scheme
2.8. Interface Signals
2.9. Hardware Setup
2.10. Simulation Testbench
2.11. Debugging Features
3.7.1. HDMI 2.1 RX-TX Retransmit Design without Video Frame Buffer (Enable Active Video Protocol = AXIS-VVP Full, Video In and Out Use the Same Clock = ON)
3.7.2. HDMI 2.1 RX-TX Retransmit Design with Video Frame Buffer (Enable Active Video Protocol = AXIS-VVP Full, Video In and Out Use the Same = OFF)
3.7.3. Clock Details
Visible to Intel only — GUID: djg1654228425418
Ixiasoft
3.6.8. Set AXI2CV Configuration
Configure the AXI2CV mode bank according to the resolution and color format of the video received from HDMI RX. In this design example, the AXI2CV demonstrates the AXI2CV mode bank configuration below at RGB and YCbCr444. Expand the list according to your application.
- 720x480p60
- 1280x720p60
- 1920x1080p60
- 3840x2160p60
- 7680x4320p30