F-Tile HDMI Intel® FPGA IP Design Example User Guide

ID 709314
Date 4/03/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.7. Clocking Scheme

The clocking scheme illustrates the clock domains in the HDMI Intel® FPGA IP design example.
Figure 23. HDMI 2.1 Design Example Clocking Scheme
Table 15.  Clocking Scheme Signals
Clock Signal Name in Design Description
Management Clock

mgmt_clk

A free running 100 MHz clock for these components:
  • IOPLL (Video Clock)
  • CPU
  • I2C Master
  • HDMI TX Core
  • RX-TX Link
I2C Clock i2c_clk

A 100 MHz clock input that clocks I2C slave, output buffers, SCDC registers, and link training process in the HDMI RX core, and EDID RAM.

Video Clock tx_vid_clk/rx_vid_clk

Video clock to TX and RX core. The clock runs at a fixed frequency of 225 MHz.

TX/RX FRL Clock tx_frl_clk/rx_frl_clk

FRL clock to for TX and RX core.

RX PHY Clock Out 1 rx_sysclk_div2

System clock output clock to clock data from the transceiver. The frequency is system clock frequency/2. System clock frequency needs to be higher than the fastest PMA clock frequency, with the valid bit from the transceiver parallel data bus indicating the validity of data.

For this HDMI design example, the rx_sysclk_div2 is 450MHz as the System PLL output frequency is 900MHz.

RX PHY Clock Out 2 rx_clk

Clock out recovered from the transceiver, and the frequency varies depending on the data rate and transceiver width.

RX transceiver clock out frequency = Transceiver data rate/ Transceiver width

For this HDMI design example, the RX transceiver clock out from channel 1 clocks the RX transceiver core input (rx_coreclkin) and FRL IOPLL (pll_frl_rx) reference clock

TX PHY Clock Out 1 tx_sysclk_div2

System clock output clock to clock data from the transceiver. The frequency is system clock frequency/2. System clock frequency needs to be higher than the fastest PMA clock frequency, with the valid bit from the transceiver parallel data bus indicating the validity of data.

For this HDMI design example, the tx_sysclk_div2 is 450MHz as the System PLL output frequency is 900MHz.

TX PHY Clock Out 2 tx_clk

Parallel clock generated from system PLL, and the frequency varies depending on the data rate and transceiver width.

TX transceiver clock out frequency = Transceiver data rate/ Transceiver width

For this HDMI design example, the TX transceiver clock out from channel 1 clocks the TX transceiver core input (rx_coreclkin) and FRL IOPLL (pll_frl_tx) reference clock.

Transceiver TMDS Reference Clock fgt_refclk_148p5 Reference clock to the F-tile Reference and System PLL Clock IP for TMDS mode
System PLL Reference Clock fgt_refclk_100 Reference clock to the System PLL block. The clock only supports 100 MHz frequency.
System PLL Clock systempll_clk Reference clock to the TX and RX Transceiver System PLL Clock. The clock frequency is 100 MHz.
Transceiver Reference Clock refclk_fgt Reference clock to the TX PLL and RX CDR.
TX Cadence Clock tx_cadence_clk Clock for the tx_cadence_slow_clk in the TX transceiver to generate the tx_cadence. Since there is a conversion of the data width from 40 bits from TX core to 64 bits in TX transceiver, the tx_cadence_slow_clk needs to be supplied with a clock derived from transceiver output clock with the frequency 5/8*Tx transceiver clock frequency.