1.5. Compiling and Testing the Design
Figure 5. Compiling and Simulating the Design
To compile and run a demonstration test on the hardware example design, follow these steps:
- Ensure hardware example design generation is complete.
- Launch the Intel® Quartus® Prime Pro Edition software and open <project>/quartus/agi_dp_demo.qpf.
- Click .
- After successful compilation, the Intel® Quartus® Prime Pro Edition software generates a .sof file in your specified directory.
- Connect the DisplayPort RX connector on the Bitec daughter card to an external DisplayPort source, such as the graphics card on a PC.
- Connect the DisplayPort TX connector on the Bitec daughter card to a DisplayPort sink device, such as a video analyzer or a PC monitor.
- Ensure all switches on the development board are in default position.
- Configure the selected Intel® Agilex™ F-Tile device on the development board using the generated .sof file (Tools ➤ Programmer ).
- The DisplayPort sink device displays the video generated from the video source.