E-tile Hard IP Intel® Agilex™ Design Example User Guide: Ethernet, E-tile CPRI PHY and Dynamic Reconfiguration

ID 683860
Date 9/26/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.2.4. Interface Signals

Table 20.  Design Example Interface Signals
Signal Direction Description
ref_clk100MHz Input Input clock for CSR access on all the AV-MM interfaces. Drive at 100 MHz.
ref_clk156MHz Input Reference clock for channel PLL. Drive at 156.25 MHz.
i_clk_ref Input Transceiver reference clock. Drive at
  • 153.6 MHz for CPRI line rates 2.4,3.07,4.9,6.1, and 9.8 Gbps.
  • 184.32 MHz for CPRI line rates 10.1,12.1, and 24.3 Gbps with and without RS-FEC.
i_rx_serial[n] Input Transceiver PHY input serial data.
o_tx_serial[n] Output Transceiver PHY output serial data.