Intel® Stratix® 10 Configuration User Guide

Download PDF
ID 683762
Date 10/04/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Intel® Stratix® 10 Configuration User Guide 2. Intel® Stratix® 10 Configuration Details 3. Intel® Stratix® 10 Configuration Schemes 4. Including the Reset Release Intel® FPGA IP in Your Design 5. Remote System Update (RSU) 6. Intel® Stratix® 10 Configuration Features 7. Intel® Stratix® 10 Debugging Guide 8. Intel® Stratix® 10 Configuration User Guide Archives 9. Document Revision History for the Intel® Stratix® 10 Configuration User Guide
1. Intel® Stratix® 10 Configuration User Guide x
1.1. Intel® Stratix® 10 Configuration Overview 1.2. Intel® Stratix® 10 Configuration Architecture
1.1. Intel® Stratix® 10 Configuration Overview x
1.1.1. Configuration and Related Signals 1.1.2. Intel Download Cables Supporting Configuration in Intel® Stratix® 10 Devices
1.2. Intel® Stratix® 10 Configuration Architecture x
1.2.1. Secure Device Manager
1.2.1. Secure Device Manager x
1.2.1.1. Restricting Security Features 1.2.1.2. Updating the SDM Firmware 1.2.1.3. Specifying Boot Order for Intel® Stratix® 10 SoC Devices
2. Intel® Stratix® 10 Configuration Details x
2.1. Intel® Stratix® 10 Configuration Timing Diagram 2.2. Configuration Flow Diagram 2.3. Device Response to Configuration and Reset Events 2.4. Additional Clock Requirements for HPS, PCIe* , eSRAM, and HBM2 2.5. Intel® Stratix® 10 Configuration Pins 2.6. Configuration Clocks 2.7. Maximum Configuration Time Estimation 2.8. Generating Compressed .sof File
2.5. Intel® Stratix® 10 Configuration Pins x
2.5.1. SDM Pin Mapping 2.5.2. MSEL Settings 2.5.3. Device Configuration Pins for Optional Configuration Signals
2.5.3. Device Configuration Pins for Optional Configuration Signals x
2.5.3.1. Specifying Optional Configuration Pins 2.5.3.2. Enabling Dual-Purpose Pins 2.5.3.3. Configuration Pins I/O Standard, Drive Strength, and IBIS Model 2.5.3.4. SDM I/O Pins for Power Management and SmartVID 2.5.3.5. Specifying Pins for Partial Reconfiguration (PR)
2.5.3.1. Specifying Optional Configuration Pins x
2.5.3.1.1. nCONFIG 2.5.3.1.2. nSTATUS 2.5.3.1.3. CONF_DONE and INIT_DONE 2.5.3.1.4. SDM_IO Pins
2.6. Configuration Clocks x
2.6.1. Setting Configuration Clock Source 2.6.2. OSC_CLK_1 Clock Input
3. Intel® Stratix® 10 Configuration Schemes x
3.1. Avalon-ST Configuration 3.2. AS Configuration 3.3. JTAG Configuration
3.1. Avalon-ST Configuration x
3.1.1. Avalon® -ST Configuration Scheme Hardware Components and File Types 3.1.2. Enabling Avalon-ST Device Configuration 3.1.3. The AVST_READY Signal 3.1.4. RBF Configuration File Format 3.1.5. Avalon-ST Single-Device Configuration 3.1.6. Debugging Guidelines for the Avalon® -ST Configuration Scheme 3.1.7. IP for Use with the Avalon® -ST Configuration Scheme: Intel FPGA Parallel Flash Loader II IP Core
3.1.7. IP for Use with the Avalon® -ST Configuration Scheme: Intel FPGA Parallel Flash Loader II IP Core x
3.1.7.1. Functional Description 3.1.7.2. Designing with the PFL II IP Core for Avalon-ST Single Device Configuration 3.1.7.3. Generating the PFL II IP Core 3.1.7.4. Constraining the PFL II IP Core 3.1.7.5. Using the PFL II IP Core
3.1.7.1. Functional Description x
3.1.7.1.1. Generating and Programming a .pof into CFI Flash 3.1.7.1.2. Implementing Multiple Pages in the Flash .pof 3.1.7.1.3. Storing Option Bits 3.1.7.1.4. Verifying the Option Bit Start and End Addresses 3.1.7.1.5. Implementing Page Mode and Option Bits in the CFI Flash Memory Device
3.1.7.2. Designing with the PFL II IP Core for Avalon-ST Single Device Configuration x
3.1.7.2.1. PFL II Parameters 3.1.7.2.2. PFL II Signals
3.1.7.3. Generating the PFL II IP Core x
3.1.7.3.1. Controlling Avalon-ST Configuration with PFL II IP Core 3.1.7.3.2. Mapping PFL II IP Core and Flash Address 3.1.7.3.3. Creating a Single PFL II IP for Programming and Configuration 3.1.7.3.4. Creating Separate PFL II Functions
3.1.7.4. Constraining the PFL II IP Core x
3.1.7.4.1. PFL II IP Recommended Design Constraints to FPGA Avalon-ST Pins 3.1.7.4.2. PFL II IP Recommended Design Constraints for Using QSPI Flash 3.1.7.4.3. PFL II IP Recommended Design Constraints for using CFI Flash 3.1.7.4.4. PFL II IP Recommended Constraints for Other Input Pins 3.1.7.4.5. PFL II IP Recommended Constraints for Other Output Pins
3.1.7.5. Using the PFL II IP Core x
3.1.7.5.1. Converting .sof to .pof File 3.1.7.5.2. Programming CPLDs and Flash Memory Devices Sequentially 3.1.7.5.3. Programming CPLDs and Flash Memory Devices Separately 3.1.7.5.4. Defining New CFI Flash Memory Device
3.2. AS Configuration x
3.2.1. AS Configuration Scheme Hardware Components and File Types 3.2.2. AS Single-Device Configuration 3.2.3. AS Using Multiple Serial Flash Devices 3.2.4. AS Configuration Timing Parameters 3.2.5. Maximum Allowable External AS_DATA Pin Skew Delay Guidelines 3.2.6. Programming Serial Flash Devices 3.2.7. Serial Flash Memory Layout 3.2.8. AS_CLK 3.2.9. Active Serial Configuration Software Settings 3.2.10. Intel® Quartus® Prime Programming Steps 3.2.11. Debugging Guidelines for the AS Configuration Scheme
3.2.6. Programming Serial Flash Devices x
3.2.6.1. Programming Serial Flash Devices using the AS Interface 3.2.6.2. Programming Serial Flash Devices using the JTAG Interface
3.2.7. Serial Flash Memory Layout x
3.2.7.1. Understanding Quad SPI Flash Byte-Addressing
3.2.10. Intel® Quartus® Prime Programming Steps x
3.2.10.1. Generating Programming Files using the Programming File Generator 3.2.10.2. Programming .pof files into Serial Flash Device 3.2.10.3. Programming .jic files into Serial Flash Device
3.3. JTAG Configuration x
3.3.1. JTAG Configuration Scheme Hardware Components and File Types 3.3.2. JTAG Device Configuration 3.3.3. JTAG Multi-Device Configuration 3.3.4. Debugging Guidelines for the JTAG Configuration Scheme
3.3.2. JTAG Device Configuration x
3.3.2.1. JTAG Single-Device Configuration using Download Cable Connections 3.3.2.2. JTAG Single-Device Configuration using a Microprocessor
3.3.3. JTAG Multi-Device Configuration x
3.3.3.1. JTAG Multi-Device Configuration using Download Cable
4. Including the Reset Release Intel® FPGA IP in Your Design x
4.1. Understanding the Reset Release IP Requirement 4.2. Instantiating the Reset Release IP In Your Design 4.3. Gating the PLL Reset Signal 4.4. Guidance When Using Partial Reconfiguration (PR) 4.5. Detailed Description of Device Configuration
4.5. Detailed Description of Device Configuration x
4.5.1. Device Initialization 4.5.2. Preventing Register Initialization During Power-On 4.5.3. Embedded Memory Block Initial Conditions 4.5.4. Protecting State Machine Logic
5. Remote System Update (RSU) x
5.1. Remote System Update Functional Description 5.2. Guidelines for Performing Remote System Update Functions for Non-HPS 5.3. Commands and Responses 5.4. Quad SPI Flash Layout 5.5. Generating Remote System Update Image Files Using the Programming File Generator 5.6. Remote System Update from FPGA Core Example
5.1. Remote System Update Functional Description x
5.1.1. RSU Glossary 5.1.2. Remote System Update Using AS Configuration 5.1.3. Remote System Update Configuration Images 5.1.4. Remote System Update Configuration Sequence 5.1.5. RSU Recovery from Corrupted Images 5.1.6. Updates with the Factory Update Image
5.3. Commands and Responses x
5.3.1. Operation Commands 5.3.2. Error Code Responses 5.3.3. Error Code Recovery
5.4. Quad SPI Flash Layout x
5.4.1. High Level Flash Layout 5.4.2. Detailed Quad SPI Flash Layout
5.4.1. High Level Flash Layout x
5.4.1.1. Standard (non-RSU) Image Layout in Flash 5.4.1.2. RSU Image Layout in Flash – SDM Perspective 5.4.1.3. RSU Image Layout – Your Perspective
5.4.1.2. RSU Image Layout in Flash – SDM Perspective x
5.4.1.2.1. Firmware Version Information
5.4.2. Detailed Quad SPI Flash Layout x
5.4.2.1. RSU Image Sub-Partitions Layout 5.4.2.2. Sub-Partition Table Layout 5.4.2.3. Configuration Pointer Block Layout 5.4.2.4. Modifying the List of Application Images 5.4.2.5. Application Image Layout
5.5. Generating Remote System Update Image Files Using the Programming File Generator x
5.5.1. Generating the Initial RSU Image 5.5.2. Generating an Application Image 5.5.3. Generating a Factory Update Image 5.5.4. Command Sequence To Perform Quad SPI Operations
5.5.1. Generating the Initial RSU Image x
5.5.1.1. Generating the Initial RSU Image Using .sof Files 5.5.1.2. Generating the Initial RSU Image Using .rbf Files 5.5.1.3. Updating Decision Firmware
5.6. Remote System Update from FPGA Core Example x
5.6.1. Prerequisites 5.6.2. Creating Initial Flash Image Containing Bitstreams for Factory Image and One Application Image 5.6.3. Programming Flash Memory with the Initial Remote System Update Image 5.6.4. Reconfiguring the Device with an Application or Factory Image 5.6.5. Adding an Application Image 5.6.6. Removing an Application Image
6. Intel® Stratix® 10 Configuration Features x
6.1. Device Security 6.2. Configuration via Protocol 6.3. Partial Reconfiguration
7. Intel® Stratix® 10 Debugging Guide x
7.1. Configuration Debugging Checklist 7.2. Intel® Stratix® 10 Configuration Architecture Overview 7.3. Understanding Configuration Status Using quartus_pgm command 7.4. SDM Debug Toolkit Overview 7.5. Configuration Pin Differences from Previous Device Families 7.6. Configuration File Format Differences 7.7. Understanding SEUs 7.8. Reading the Unique 64-Bit CHIP ID 7.9. E-Tile Transceivers May Fail To Configure 7.10. Understanding and Troubleshooting Configuration Pin Behavior
7.4. SDM Debug Toolkit Overview x
7.4.1. Using the SDM Debug Toolkit
1. Intel® Stratix® 10 Configuration User Guide
2. Intel® Stratix® 10 Configuration Details
3. Intel® Stratix® 10 Configuration Schemes
4. Including the Reset Release Intel® FPGA IP in Your Design
5. Remote System Update (RSU)
6. Intel® Stratix® 10 Configuration Features
7. Intel® Stratix® 10 Debugging Guide
8. Intel® Stratix® 10 Configuration User Guide Archives
9. Document Revision History for the Intel® Stratix® 10 Configuration User Guide

2.4. Additional Clock Requirements for HPS, PCIe* , eSRAM, and HBM2

The Intel® Stratix® 10 device has specific clock requirements for PCIe* , HPS EMIF, eSRAM, and the High Bandwidth Memory (HBM2) IP. These clock requirements must be met before the FPGA configuration begins.

FPGA Configuration

To avoid configuration failures, the Intel® Stratix® 10 device requires clocks for the PCIe* , HPS EMIF, eSRAM, the HBM2 IP, and all E-tile transceiver reference clocks. You must provide a free-running, stable reference clock to these blocks before configuration begins and throughout the entire user mode. The clock frequencies must match the frequency settings specified in the Intel® Quartus® Prime software during configuration. Stopping the reference clock during the user mode may result in a functional failure. This reference clock is in addition to the configuration clock requirements for an internal or external oscillator described in OSC_CLK_1 Requirements. These blocks and their specific clock names are as listed below.
  • HBM2: pll_ref_clk and ext_core_clk
  • eSRAM: CLK_ESRAM_[0,1]p and CLK_ESRAM_[0,1]n
  • HPS: HPS_OSC_CLK, when HPS enabled 3
  • HPS EMIF: pll_ref_clk
  • L- and H-tile PCIe* channels: REFCLK_GXB
  • E-tile: REFCLK_GXE

    In the Intel® Stratix® 10 TX/MX devices, when using PRESERVE_UNUSED_XCVR_CHANNEL_QSF assignment to protect unused channels by enabling transceiver circuits, you must provide a free-running and stable reference clock to the transceiver circuit.

Note: The transceiver power supplies must be at nominal levels for successful configuration. You can use the VCC and VCCP power supplies for limited transceiver channel testing. Designs that include many transceivers require an auxiliary power supply to operate reliably.

Intel® Quartus® Prime Pro Edition software allows you to configure the HPS prior to FPGA configuration. To enable this option, select HPS First in the Assignments > Device > Device and Pin Options > Configuration > HPS/FPGA Configuration order dialog box.

HPS First Configuration

Intel® Stratix® 10 devices have the option of booting the HPS before configuring the FPGA core logic. This method is known as the HPS first configuration. When you choose this option in the Intel® Quartus® Prime Pro Edition software, the following clocks must be operational prior to the FPGA I/O, HPS I/O, and HPS boot, also called a phase 1 configuration:
  • HPS reference clock: HPS_OSC_CLK
  • HPS EMIF (when in use): pll_ref_clk
  • E-tile transceivers: REFCLK_GXE

The remaining clocks specified in the FPGA Configuration must be fully operational prior the FPGA core logic configuration, also called phase 2 configuration. For more information on HPS boot first mode, refer to the Intel® Stratix® 10 SoC FPGA Boot User Guide.

Related Information
3 If you use the FPGA to HPS free clock as the HPS PLL reference clock, the HPS_OSC_CLK clock may not be required.
Level Two Title