25G Ethernet Intel® Arria® 10 FPGA IP User Guide

Download PDF
ID 683639
Date 3/29/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About the 25G Ethernet Intel FPGA IP 2. Getting Started 3. 25G Ethernet Intel FPGA IP Parameters 4. Functional Description 5. Reset 6. Interfaces and Signal Descriptions 7. Control, Status, and Statistics Register Descriptions 8. Debugging the Link 9. 25G Ethernet Intel® Arria® 10 FPGA IP User Guide Archive 10. Document Revision History for the 25G Ethernet Intel® Arria® 10 FPGA IP User Guide
1. About the 25G Ethernet Intel FPGA IP x
1.1. Release Information 1.2. 25G Ethernet Intel FPGA IP Supported Features 1.3. 25G Ethernet Intel FPGA IP Core Device Family and Speed Grade Support 1.4. IP Core Verification 1.5. Performance and Resource Utilization
1.3. 25G Ethernet Intel FPGA IP Core Device Family and Speed Grade Support x
1.3.1. Device Family Support 1.3.2. 25G Ethernet Intel FPGA IP Core Device Speed Grade Support
1.4. IP Core Verification x
1.4.1. Simulation Environment 1.4.2. Compilation Checking 1.4.3. Hardware Testing
2. Getting Started x
2.1. Installing and Licensing Intel® FPGA IP Cores 2.2. Specifying the 25G Ethernet Intel FPGA IP Core Parameters and Options 2.3. Simulating the IP Core 2.4. Generated File Structure 2.5. Integrating Your IP Core in Your Design 2.6. Compiling the Full Design and Programming the FPGA
2.1. Installing and Licensing Intel® FPGA IP Cores x
2.1.1. Intel® FPGA IP Evaluation Mode
2.5. Integrating Your IP Core in Your Design x
2.5.1. Pin Assignments 2.5.2. Adding the Transceiver PLL 2.5.3. Handling Potential Jitter in Intel® Arria® 10 Devices 2.5.4. Adding the External Time-of-Day Module for Variations with 1588 PTP Feature 2.5.5. Placement Settings for the 25G Ethernet Intel FPGA IP Core
4. Functional Description x
4.1. 25G Ethernet Intel FPGA IP Core Functional Description 4.2. User Interface to Ethernet Transmission
4.1. 25G Ethernet Intel FPGA IP Core Functional Description x
4.1.1. 25G Ethernet Intel FPGA IP Core TX MAC Datapath 4.1.2. 25 GbE TX PCS 4.1.3. 25G Ethernet Intel FPGA IP Core RX MAC Datapath 4.1.4. Link Fault Signaling Interface 4.1.5. 25 GbE RX PCS 4.1.6. Flow Control 4.1.7. 1588 Precision Time Protocol Interfaces
4.1.1. 25G Ethernet Intel FPGA IP Core TX MAC Datapath x
4.1.1.1. Frame Padding 4.1.1.2. Preamble Insertion 4.1.1.3. Inter-Packet Gap Generation and Insertion 4.1.1.4. Frame Check Sequence (CRC32) Insertion
4.1.2. 25 GbE TX PCS x
4.1.2.1. TX RSFEC
4.1.3. 25G Ethernet Intel FPGA IP Core RX MAC Datapath x
4.1.3.1. IP Core Preamble Processing 4.1.3.2. IP Core Malformed Packet Handling 4.1.3.3. Length/Type Field Processing 4.1.3.4. RX CRC Checking and Dynamic Forwarding
4.1.3.3. Length/Type Field Processing x
4.1.3.3.1. Length Checking
4.1.5. 25 GbE RX PCS x
4.1.5.1. RX RSFEC
4.1.6. Flow Control x
4.1.6.1. TX Pause/PFC Flow Control Frame Transmission Request 4.1.6.2. XON/XOFF Pause Frames
4.1.7. 1588 Precision Time Protocol Interfaces x
4.1.7.1. Implementing a 1588 System That Includes a 25G Ethernet Intel FPGA IP Core 4.1.7.2. PTP Receive Functionality 4.1.7.3. PTP Transmit Functionality 4.1.7.4. External Time-of-Day Module for 1588 PTP Variations 4.1.7.5. PTP Timestamp and TOD Formats
4.2. User Interface to Ethernet Transmission x
4.2.1. Order of Transmission 4.2.2. Bit Order For TX and RX Datapaths
6. Interfaces and Signal Descriptions x
6.1. TX MAC Interface to User Logic 6.2. RX MAC Interface to User Logic 6.3. Transceivers 6.4. Transceiver Reconfiguration Signals 6.5. Avalon® Memory-Mapped Management Interface 6.6. 1588 PTP Interface Signals 6.7. Miscellaneous Status and Debug Signals 6.8. Reset Signals
7. Control, Status, and Statistics Register Descriptions x
7.1. PHY Registers 7.2. TX MAC Registers 7.3. RX MAC Registers 7.4. Pause/PFC Flow Control Registers 7.5. Statistics Registers 7.6. 1588 PTP Registers 7.7. TX Reed-Solomon FEC Registers 7.8. RX Reed-Solomon FEC Registers
7.5. Statistics Registers x
7.5.1. TX Statistics Registers 7.5.2. RX Statistics Registers
8. Debugging the Link x
8.1. Error Insertion Test and Debugging
1. About the 25G Ethernet Intel FPGA IP
2. Getting Started
3. 25G Ethernet Intel FPGA IP Parameters
4. Functional Description
5. Reset
6. Interfaces and Signal Descriptions
7. Control, Status, and Statistics Register Descriptions
8. Debugging the Link
9. 25G Ethernet Intel® Arria® 10 FPGA IP User Guide Archive
10. Document Revision History for the 25G Ethernet Intel® Arria® 10 FPGA IP User Guide

4.2.1. Order of Transmission

The IP core transmits bytes on the Ethernet link starting with the preamble and ending with the FCS in accordance with the IEEE 802.3 standard. On the transmit client interface, the IP core expects the client to send the most significant bytes of the frame first, and to send each byte in big-endian format. Similarly, on the receive client interface, the IP core sends the client the most significant bytes of the frame first, and orders each byte in big-endian format.

Figure 24. Byte Order on the Client Interface LanesDescribes the byte order on the Avalon® streaming interface. Destination Address[40] is the broadcast/multicast bit (a type bit), and Destination Address[41] is a locally administered address bit.


For example, the destination MAC address includes the following six octets AC-DE-48-00-00-80. The first octet transmitted (octet 0 of the MAC address described in the 802.3 standard) is AC and the last octet transmitted (octet 5 of the MAC address) is 80. The first bit transmitted is the low-order bit of AC, a zero. The last bit transmitted is the high order bit of 80, a one.

The preceding table and the following figure show that in this example, 0xAC is driven on DA5 (DA[47:40]) and 0x80 is driven on DA0 (DA[7:0]).

Figure 25. Octet Transmission on the 25GbE Avalon® Streaming SignalsIn the following diagram Preamble pass through and CRC pass through mode are disabled.
Level Two Title