25G Ethernet Intel® Arria® 10 FPGA IP User Guide

Download PDF
ID 683639
Date 3/29/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About the 25G Ethernet Intel FPGA IP 2. Getting Started 3. 25G Ethernet Intel FPGA IP Parameters 4. Functional Description 5. Reset 6. Interfaces and Signal Descriptions 7. Control, Status, and Statistics Register Descriptions 8. Debugging the Link 9. 25G Ethernet Intel® Arria® 10 FPGA IP User Guide Archive 10. Document Revision History for the 25G Ethernet Intel® Arria® 10 FPGA IP User Guide
1. About the 25G Ethernet Intel FPGA IP x
1.1. Release Information 1.2. 25G Ethernet Intel FPGA IP Supported Features 1.3. 25G Ethernet Intel FPGA IP Core Device Family and Speed Grade Support 1.4. IP Core Verification 1.5. Performance and Resource Utilization
1.3. 25G Ethernet Intel FPGA IP Core Device Family and Speed Grade Support x
1.3.1. Device Family Support 1.3.2. 25G Ethernet Intel FPGA IP Core Device Speed Grade Support
1.4. IP Core Verification x
1.4.1. Simulation Environment 1.4.2. Compilation Checking 1.4.3. Hardware Testing
2. Getting Started x
2.1. Installing and Licensing Intel® FPGA IP Cores 2.2. Specifying the 25G Ethernet Intel FPGA IP Core Parameters and Options 2.3. Simulating the IP Core 2.4. Generated File Structure 2.5. Integrating Your IP Core in Your Design 2.6. Compiling the Full Design and Programming the FPGA
2.1. Installing and Licensing Intel® FPGA IP Cores x
2.1.1. Intel® FPGA IP Evaluation Mode
2.5. Integrating Your IP Core in Your Design x
2.5.1. Pin Assignments 2.5.2. Adding the Transceiver PLL 2.5.3. Handling Potential Jitter in Intel® Arria® 10 Devices 2.5.4. Adding the External Time-of-Day Module for Variations with 1588 PTP Feature 2.5.5. Placement Settings for the 25G Ethernet Intel FPGA IP Core
4. Functional Description x
4.1. 25G Ethernet Intel FPGA IP Core Functional Description 4.2. User Interface to Ethernet Transmission
4.1. 25G Ethernet Intel FPGA IP Core Functional Description x
4.1.1. 25G Ethernet Intel FPGA IP Core TX MAC Datapath 4.1.2. 25 GbE TX PCS 4.1.3. 25G Ethernet Intel FPGA IP Core RX MAC Datapath 4.1.4. Link Fault Signaling Interface 4.1.5. 25 GbE RX PCS 4.1.6. Flow Control 4.1.7. 1588 Precision Time Protocol Interfaces
4.1.1. 25G Ethernet Intel FPGA IP Core TX MAC Datapath x
4.1.1.1. Frame Padding 4.1.1.2. Preamble Insertion 4.1.1.3. Inter-Packet Gap Generation and Insertion 4.1.1.4. Frame Check Sequence (CRC32) Insertion
4.1.2. 25 GbE TX PCS x
4.1.2.1. TX RSFEC
4.1.3. 25G Ethernet Intel FPGA IP Core RX MAC Datapath x
4.1.3.1. IP Core Preamble Processing 4.1.3.2. IP Core Malformed Packet Handling 4.1.3.3. Length/Type Field Processing 4.1.3.4. RX CRC Checking and Dynamic Forwarding
4.1.3.3. Length/Type Field Processing x
4.1.3.3.1. Length Checking
4.1.5. 25 GbE RX PCS x
4.1.5.1. RX RSFEC
4.1.6. Flow Control x
4.1.6.1. TX Pause/PFC Flow Control Frame Transmission Request 4.1.6.2. XON/XOFF Pause Frames
4.1.7. 1588 Precision Time Protocol Interfaces x
4.1.7.1. Implementing a 1588 System That Includes a 25G Ethernet Intel FPGA IP Core 4.1.7.2. PTP Receive Functionality 4.1.7.3. PTP Transmit Functionality 4.1.7.4. External Time-of-Day Module for 1588 PTP Variations 4.1.7.5. PTP Timestamp and TOD Formats
4.2. User Interface to Ethernet Transmission x
4.2.1. Order of Transmission 4.2.2. Bit Order For TX and RX Datapaths
6. Interfaces and Signal Descriptions x
6.1. TX MAC Interface to User Logic 6.2. RX MAC Interface to User Logic 6.3. Transceivers 6.4. Transceiver Reconfiguration Signals 6.5. Avalon® Memory-Mapped Management Interface 6.6. 1588 PTP Interface Signals 6.7. Miscellaneous Status and Debug Signals 6.8. Reset Signals
7. Control, Status, and Statistics Register Descriptions x
7.1. PHY Registers 7.2. TX MAC Registers 7.3. RX MAC Registers 7.4. Pause/PFC Flow Control Registers 7.5. Statistics Registers 7.6. 1588 PTP Registers 7.7. TX Reed-Solomon FEC Registers 7.8. RX Reed-Solomon FEC Registers
7.5. Statistics Registers x
7.5.1. TX Statistics Registers 7.5.2. RX Statistics Registers
8. Debugging the Link x
8.1. Error Insertion Test and Debugging
1. About the 25G Ethernet Intel FPGA IP
2. Getting Started
3. 25G Ethernet Intel FPGA IP Parameters
4. Functional Description
5. Reset
6. Interfaces and Signal Descriptions
7. Control, Status, and Statistics Register Descriptions
8. Debugging the Link
9. 25G Ethernet Intel® Arria® 10 FPGA IP User Guide Archive
10. Document Revision History for the 25G Ethernet Intel® Arria® 10 FPGA IP User Guide

6.7. Miscellaneous Status and Debug Signals

The miscellaneous status and debug signals are asynchronous.
Table 18.  Miscellaneous Status and Debug Signals

Signal

Direction

Description

tx_lanes_stable Output Asserted when all TX lanes are stable and ready to transmit data.
rx_block_lock Output

Signal is asserted when 64B/66B sync header is found consecutively for at least 64 clock cycles by the RX PCS.

rx_am_lock Output

If you turn on Enable RS-FEC in the parameter editor, this signal is asserted when alignment marker lock status is achieved.

If you turn off Enable RS-FEC in the parameter editor, this signal behaves the same as the rx_block_lock signal.

rx_pcs_ready Output

Signal is asserted when rx_block_lock is asserted.

local_fault_status Output Asserted when the RX MAC detects a local fault. This signal is available if you turn on Enable link fault generation in the parameter editor.
remote_fault_status Output Asserted when the RX MAC detects a remote fault. This signal is available if you turn on Enable link fault generation in the parameter editor.
unidirectional_en Output Asserted if the IP core includes Clause 66 for unidirectional support. This signal is available if you turn on Enable link fault generation in the parameter editor.
link_fault_gen_en Output Asserted if the IP core includes Clause 66 for unidirectional support. This signal is available if you turn on Enable link fault generation in the parameter editor.
Related Information
Level Two Title