25G Ethernet Intel® Arria® 10 FPGA IP User Guide

Download PDF
ID 683639
Date 3/29/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About the 25G Ethernet Intel FPGA IP 2. Getting Started 3. 25G Ethernet Intel FPGA IP Parameters 4. Functional Description 5. Reset 6. Interfaces and Signal Descriptions 7. Control, Status, and Statistics Register Descriptions 8. Debugging the Link 9. 25G Ethernet Intel® Arria® 10 FPGA IP User Guide Archive 10. Document Revision History for the 25G Ethernet Intel® Arria® 10 FPGA IP User Guide
1. About the 25G Ethernet Intel FPGA IP x
1.1. Release Information 1.2. 25G Ethernet Intel FPGA IP Supported Features 1.3. 25G Ethernet Intel FPGA IP Core Device Family and Speed Grade Support 1.4. IP Core Verification 1.5. Performance and Resource Utilization
1.3. 25G Ethernet Intel FPGA IP Core Device Family and Speed Grade Support x
1.3.1. Device Family Support 1.3.2. 25G Ethernet Intel FPGA IP Core Device Speed Grade Support
1.4. IP Core Verification x
1.4.1. Simulation Environment 1.4.2. Compilation Checking 1.4.3. Hardware Testing
2. Getting Started x
2.1. Installing and Licensing Intel® FPGA IP Cores 2.2. Specifying the 25G Ethernet Intel FPGA IP Core Parameters and Options 2.3. Simulating the IP Core 2.4. Generated File Structure 2.5. Integrating Your IP Core in Your Design 2.6. Compiling the Full Design and Programming the FPGA
2.1. Installing and Licensing Intel® FPGA IP Cores x
2.1.1. Intel® FPGA IP Evaluation Mode
2.5. Integrating Your IP Core in Your Design x
2.5.1. Pin Assignments 2.5.2. Adding the Transceiver PLL 2.5.3. Handling Potential Jitter in Intel® Arria® 10 Devices 2.5.4. Adding the External Time-of-Day Module for Variations with 1588 PTP Feature 2.5.5. Placement Settings for the 25G Ethernet Intel FPGA IP Core
4. Functional Description x
4.1. 25G Ethernet Intel FPGA IP Core Functional Description 4.2. User Interface to Ethernet Transmission
4.1. 25G Ethernet Intel FPGA IP Core Functional Description x
4.1.1. 25G Ethernet Intel FPGA IP Core TX MAC Datapath 4.1.2. 25 GbE TX PCS 4.1.3. 25G Ethernet Intel FPGA IP Core RX MAC Datapath 4.1.4. Link Fault Signaling Interface 4.1.5. 25 GbE RX PCS 4.1.6. Flow Control 4.1.7. 1588 Precision Time Protocol Interfaces
4.1.1. 25G Ethernet Intel FPGA IP Core TX MAC Datapath x
4.1.1.1. Frame Padding 4.1.1.2. Preamble Insertion 4.1.1.3. Inter-Packet Gap Generation and Insertion 4.1.1.4. Frame Check Sequence (CRC32) Insertion
4.1.2. 25 GbE TX PCS x
4.1.2.1. TX RSFEC
4.1.3. 25G Ethernet Intel FPGA IP Core RX MAC Datapath x
4.1.3.1. IP Core Preamble Processing 4.1.3.2. IP Core Malformed Packet Handling 4.1.3.3. Length/Type Field Processing 4.1.3.4. RX CRC Checking and Dynamic Forwarding
4.1.3.3. Length/Type Field Processing x
4.1.3.3.1. Length Checking
4.1.5. 25 GbE RX PCS x
4.1.5.1. RX RSFEC
4.1.6. Flow Control x
4.1.6.1. TX Pause/PFC Flow Control Frame Transmission Request 4.1.6.2. XON/XOFF Pause Frames
4.1.7. 1588 Precision Time Protocol Interfaces x
4.1.7.1. Implementing a 1588 System That Includes a 25G Ethernet Intel FPGA IP Core 4.1.7.2. PTP Receive Functionality 4.1.7.3. PTP Transmit Functionality 4.1.7.4. External Time-of-Day Module for 1588 PTP Variations 4.1.7.5. PTP Timestamp and TOD Formats
4.2. User Interface to Ethernet Transmission x
4.2.1. Order of Transmission 4.2.2. Bit Order For TX and RX Datapaths
6. Interfaces and Signal Descriptions x
6.1. TX MAC Interface to User Logic 6.2. RX MAC Interface to User Logic 6.3. Transceivers 6.4. Transceiver Reconfiguration Signals 6.5. Avalon® Memory-Mapped Management Interface 6.6. 1588 PTP Interface Signals 6.7. Miscellaneous Status and Debug Signals 6.8. Reset Signals
7. Control, Status, and Statistics Register Descriptions x
7.1. PHY Registers 7.2. TX MAC Registers 7.3. RX MAC Registers 7.4. Pause/PFC Flow Control Registers 7.5. Statistics Registers 7.6. 1588 PTP Registers 7.7. TX Reed-Solomon FEC Registers 7.8. RX Reed-Solomon FEC Registers
7.5. Statistics Registers x
7.5.1. TX Statistics Registers 7.5.2. RX Statistics Registers
8. Debugging the Link x
8.1. Error Insertion Test and Debugging
1. About the 25G Ethernet Intel FPGA IP
2. Getting Started
3. 25G Ethernet Intel FPGA IP Parameters
4. Functional Description
5. Reset
6. Interfaces and Signal Descriptions
7. Control, Status, and Statistics Register Descriptions
8. Debugging the Link
9. 25G Ethernet Intel® Arria® 10 FPGA IP User Guide Archive
10. Document Revision History for the 25G Ethernet Intel® Arria® 10 FPGA IP User Guide

6.5. Avalon® Memory-Mapped Management Interface

You access control and status registers using an Avalon® memory-mapped management interface. The interface responds regardless of the link status. It also responds when the IP core is in a reset state driven by any reset signal or soft reset other than the csr_rst_n signal. Asserting the csr_rst_n signal resets all control, status, and statistics registers; while this reset is in process, the Avalon® memory-mapped management interface does not respond.
Table 16.   Avalon® Memory-Mapped Management Interface
Note: All status_* signals are synchronous to clk_status signal.

Signal

Direction

Description

clk_status Input The clock that drives the control and status registers. The frequency of this clock is 100 MHz.
reset_status Input Connect this signal to 1'b0. This signal remains visible as a top-level signal for backward compatibility.
status_addr[15:0] Input

Drives the Avalon® memory-mapped register address.

status_read Input

When asserted, specifies a read request.

status_write Input When asserted, specifies a write request.
status_readdata[31:0] Output Drives read data. Valid when status_readdata_valid is asserted.
status_readdata_valid Output When asserted, indicates that status_read_data[31:0] is valid.
status_writedata[31:0] Input Drives the write data. The packet can end at any byte position. The empty bytes are the low-order bytes.
status_waitrequest Output Indicates that the control and status interface is not ready to complete the transaction. status_waitrequest is only used for read transactions.
Related Information
Level Two Title