E-tile Hard IP User Guide: E-Tile Hard IP for Ethernet and E-Tile CPRI PHY Intel® FPGA IPs

Download PDF
ID 683468
Date 8/04/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About E-tile Hard IP User Guide 2. About the E-Tile Hard IP for Ethernet Intel FPGA IP Core 3. About the E-Tile CPRI PHY Intel® FPGA IP 4. Supported Tools 5. E-tile Hard IP User Guide Archives
2. About the E-Tile Hard IP for Ethernet Intel FPGA IP Core x
2.1. E-Tile Hard IP for Ethernet Intel FPGA IP Supported Features 2.2. E-Tile Hard IP for Ethernet Intel FPGA IP Overview 2.3. IP Core Device Family and Speed Grade Support 2.4. IP Core Verification 2.5. Resource Utilization 2.6. Release Information 2.7. Getting Started 2.8. E-Tile Hard IP for Ethernet Intel FPGA IP Parameters 2.9. Functional Description 2.10. Reset 2.11. Interfaces and Signals 2.12. Register Descriptions 2.13. Document Revision History for the E-tile Hard IP for Ethernet Intel FPGA IP Core
2.3. IP Core Device Family and Speed Grade Support x
2.3.1. E-Tile Hard IP for Ethernet Intel FPGA IP Device Family Support 2.3.2. E-Tile Hard IP for Ethernet Intel FPGA IP Device Speed Grade Support
2.4. IP Core Verification x
2.4.1. Simulation Environment 2.4.2. Compilation Checking 2.4.3. Hardware Testing
2.7. Getting Started x
2.7.1. Installing and Licensing Intel® FPGA IP Cores 2.7.2. Specifying the IP Core Parameters and Options 2.7.3. Generated File Structure 2.7.4. Integrating Your IP Core in Your Design 2.7.5. IP Core Testbenches 2.7.6. Compiling the Full Design
2.7.1. Installing and Licensing Intel® FPGA IP Cores x
2.7.1.1. Intel® FPGA IP Evaluation Mode
2.7.4. Integrating Your IP Core in Your Design x
2.7.4.1. Channel Placement 2.7.4.2. Pin Assignments 2.7.4.3. Clock Requirements 2.7.4.4. External Time-of-Day Module for Variations with 1588 PTP Feature 2.7.4.5. SDC for Multiple E-Tile Instances
2.7.4.1. Channel Placement x
2.7.4.1.1. Guidelines and Restrictions for 24-bonded Channels Variant 2.7.4.1.2. Guidelines and Restrictions for 16-bonded Channels Variant
2.8. E-Tile Hard IP for Ethernet Intel FPGA IP Parameters x
2.8.1. Parameter Editor Parameters 2.8.2. RTL Parameters
2.9. Functional Description x
2.9.1. E-Tile Hard IP for Ethernet Intel FPGA IP MAC 2.9.2. 1588 Precision Time Protocol Interfaces 2.9.3. PCS, OTN, FlexE, and Custom PCS Modes 2.9.4. Auto-Negotiation and Link Training 2.9.5. TX and RX RS-FEC 2.9.6. PMA Direct Mode 2.9.7. Dynamic Reconfiguration 2.9.8. Ethernet Adaptation Flow for 10G/25G and 100G/4x25G Dynamic Reconfiguration Design Example 2.9.9. Ethernet Adaptation Flow with PTP or with External AIB Clocking 2.9.10. Ethernet Adaptation Flow with Non-external AIB Clocking
2.9.1. E-Tile Hard IP for Ethernet Intel FPGA IP MAC x
2.9.1.1. MAC TX Datapath 2.9.1.2. MAC RX Datapath 2.9.1.3. Congestion and Flow Control Using PAUSE or Priority Flow Control (PFC) 2.9.1.4. Pause Control and Generation Interface 2.9.1.5. Pause Control Frame Filtering 2.9.1.6. Link Fault Signaling 2.9.1.7. Order of Ethernet Transmission
2.9.1.1. MAC TX Datapath x
2.9.1.1.1. TX Preamble, Start, and SFD Insertion 2.9.1.1.2. Source Address Insertion 2.9.1.1.3. Length/Type Field Processing 2.9.1.1.4. Frame Padding 2.9.1.1.5. Frame Check Sequence (CRC-32) Insertion 2.9.1.1.6. Inter-Packet Gap Generation and Insertion
2.9.1.2. MAC RX Datapath x
2.9.1.2.1. RX Preamble Processing 2.9.1.2.2. RX Strict SFD Checking 2.9.1.2.3. RX FCS Checking 2.9.1.2.4. RX Malformed Packet Handling 2.9.1.2.5. Removing PAD Bytes and FCS Bytes from RX Frames 2.9.1.2.6. RX Undersized Frames, Oversized Frames, and Frames with Length Errors 2.9.1.2.7. Inter-Packet Gap
2.9.1.3. Congestion and Flow Control Using PAUSE or Priority Flow Control (PFC) x
2.9.1.3.1. Conditions Triggering XOFF Frame Transmission 2.9.1.3.2. Conditions Triggering XON Frame Transmission
2.9.1.6. Link Fault Signaling x
2.9.1.6.1. Determining Link Fault Condition
2.9.2. 1588 Precision Time Protocol Interfaces x
2.9.2.1. Implementing a 1588 System That Includes a E-Tile Hard IP for Ethernet Intel FPGA IP 2.9.2.2. PTP Timestamp Accuracy 2.9.2.3. PTP Transmit Functionality 2.9.2.4. PTP Receive Functionality 2.9.2.5. External Time-of-Day Module for 1588 PTP Variations 2.9.2.6. PTP Timestamp and TOD Formats 2.9.2.7. 10G/25G TX and RX Unit Interval Adjustment 2.9.2.8. 10G/25G TX and RX PTP Extra Latency 2.9.2.9. 100G PTP TX User Flow 2.9.2.10. 100G PTP RX User Flow 2.9.2.11. 100G RX Virtual Lane Offset Calculation for No FEC Variants 2.9.2.12. 100G UI Adjustment 2.9.2.13. Minimum and Maximum Reference Time (TAM) Interval for UI Measurement (Hardware) 2.9.2.14. PTP System Considerations 2.9.2.15. Logic Lock Regions Requirements for PTP Accuracy Advanced Mode
2.9.3. PCS, OTN, FlexE, and Custom PCS Modes x
2.9.3.1. PCS Only Mode 2.9.3.2. OTN Mode 2.9.3.3. FlexE Mode 2.9.3.4. Custom PCS Mode
2.10. Reset x
2.10.1. Reset Sequence
2.10.1. Reset Sequence x
2.10.1.1. Reset Sequence with External AIB Clocking
2.11. Interfaces and Signals x
2.11.1. TX MAC Interface to User Logic 2.11.2. RX MAC Interface to User Logic 2.11.3. TX PCS Interface to User Logic 2.11.4. RX PCS Interface to User Logic 2.11.5. FlexE and OTN Mode TX Interface 2.11.6. FlexE and OTN Mode RX Interface 2.11.7. TX Custom PCS Interface to User Logic 2.11.8. RX Custom PCS Interface to User Logic 2.11.9. PMA Direct Interface 2.11.10. Custom Rate Interface 2.11.11. Deterministic Latency Interface 2.11.12. 1588 PTP Interface 2.11.13. Ethernet Link and Transceiver Signals 2.11.14. Reconfiguration Interfaces and Signals 2.11.15. Miscellaneous Status and Debug Signals 2.11.16. Reset Signals 2.11.17. Clocks
2.11.14. Reconfiguration Interfaces and Signals x
2.11.14.1. Ethernet Reconfiguration Interfaces 2.11.14.2. Transceiver Reconfiguration Interfaces 2.11.14.3. RS-FEC Reconfiguration Interfaces 2.11.14.4. PTP Reconfiguration Interfaces
2.11.17. Clocks x
2.11.17.1. Asynchronous Adapter Clock in 10G/25G Mode 2.11.17.2. Asynchronous Adapter Clock in 100G Mode 2.11.17.3. Clock Network Use Cases
2.11.17.3. Clock Network Use Cases x
2.11.17.3.1. Single 25G Ethernet Channel (with FEC) 2.11.17.3.2. Single 10G Ethernet Channel (without FEC) 2.11.17.3.3. Four 25G Ethernet Channels (with FEC) within a Single FEC Block 2.11.17.3.4. Ethernet 25G x 4 (FEC Off) 2.11.17.3.5. 10G/25G Ethernet Channel with Basic PTP Accuracy Mode 2.11.17.3.6. 10G/25G Ethernet Channel with Advanced PTP Accuracy Mode 2.11.17.3.7. 100G Ethernet with Aggregated FEC 2.11.17.3.8. 100G Ethernet with PTP 2.11.17.3.9. Single 25G Synchronous Ethernet Channel 2.11.17.3.10. Multiple 25G Synchronous Ethernet Channels
2.12. Register Descriptions x
2.12.1. Auto Negotiation and Link Training Registers 2.12.2. PHY Registers 2.12.3. TX MAC Registers 2.12.4. RX MAC Registers 2.12.5. Pause and Priority- Based Flow Control Registers 2.12.6. TX Statistics Counter Registers 2.12.7. RX Statistics Counter Registers 2.12.8. 1588 PTP Registers 2.12.9. RS-FEC Registers 2.12.10. PMA Registers
2.12.1. Auto Negotiation and Link Training Registers x
2.12.1.1. ANLT Sequencer Config 2.12.1.2. ANLT Sequencer Status 2.12.1.3. Auto Negotiation Config Register 1 2.12.1.4. Auto Negotiation Config Register 2 2.12.1.5. Auto Negotiation Status Register 2.12.1.6. Auto Negotiation Config Register 3 2.12.1.7. Auto Negotiation Config Register 4 2.12.1.8. Auto Negotiation Config Register 5 2.12.1.9. Auto Negotiation Config Register 6 2.12.1.10. Auto Negotiation Status Register 1 2.12.1.11. Auto Negotiation Status Register 2 2.12.1.12. Auto Negotiation Status Register 3 2.12.1.13. Auto Negotiation Status Register 4 2.12.1.14. Auto Negotiation Status Register 5 2.12.1.15. AN Channel Override 2.12.1.16. Consortium Next Page Override 2.12.1.17. Consortium Next Page Link Partner Status 2.12.1.18. Link Training Config Register 1 2.12.1.19. Link Training Status Register 1 2.12.1.20. Link Training Config Register for Lane 0 2.12.1.21. Link Training Config Register for Lane 1 2.12.1.22. Link Training Config Register for Lane 2 2.12.1.23. Link Training Config Register for Lane 3
2.12.2. PHY Registers x
2.12.2.1. PHY Module Revision ID 2.12.2.2. PHY Scratch Register 2.12.2.3. Loopback Mode 2.12.2.4. PHY Configuration 2.12.2.5. Reset Sequencer RS-FEC Disable 2.12.2.6. RX CDR PLL Locked 2.12.2.7. TX Datapath Ready 2.12.2.8. Frame Errors Detected 2.12.2.9. Clear Frame Errors 2.12.2.10. RX PCS Status for AN/LT 2.12.2.11. PCS Error Injection 2.12.2.12. Alignment Marker Lock 2.12.2.13. Change in RX PCS Deskew Status 2.12.2.14. BER Count 2.12.2.15. Transfer Ready (AIB reset) Status for EHIP, ELANE, and PTP Channels 2.12.2.16. EHIP, ELANE, and RS-FEC Reset Status 2.12.2.17. PCS Virtual Lane 0 2.12.2.18. PCS Virtual Lane 1 2.12.2.19. PCS Virtual Lane 2 2.12.2.20. PCS Virtual Lane 3 2.12.2.21. Recovered Clock Frequency in KHz 2.12.2.22. TX Clock Frequency in KHz 2.12.2.23. Configuration Fields for TX PLD 2.12.2.24. Status for TX PLDs 2.12.2.25. Status for Dynamic Deskew Buffer 2.12.2.26. Configuration for RX PLD Block 2.12.2.27. Configuration for RX PCS 2.12.2.28. BIP Counter 0 2.12.2.29. BIP Counter 1 2.12.2.30. BIP Counter 2 2.12.2.31. BIP Counter 3 2.12.2.32. BIP Counter 4 2.12.2.33. BIP Counter 5 2.12.2.34. BIP Counter 6 2.12.2.35. BIP Counter 7 2.12.2.36. BIP Counter 8 2.12.2.37. BIP Counter 9 2.12.2.38. BIP Counter 10 2.12.2.39. BIP Counter 11 2.12.2.40. BIP Counter 12 2.12.2.41. BIP Counter 13 2.12.2.42. BIP Counter 14 2.12.2.43. BIP Counter 15 2.12.2.44. BIP Counter 16 2.12.2.45. BIP Counter 17 2.12.2.46. BIP Counter 18 2.12.2.47. BIP Counter 19 2.12.2.48. Timer Window for Hi-BER Checks 2.12.2.49. Hi-BER Frame Errors 2.12.2.50. Error Block Count 2.12.2.51. Deskew Depth 0 2.12.2.52. Deskew Depth 1 2.12.2.53. Deskew Depth 2 2.12.2.54. Deskew Depth 3 2.12.2.55. RX PCS Test Error Count
2.12.3. TX MAC Registers x
2.12.3.1. TX MAC Module Revision ID 2.12.3.2. TX MAC Scratch Register 2.12.3.3. Link Fault Configuration 2.12.3.4. IPG Words to remove per Alignment Marker Period 2.12.3.5. Maximum TX Frame Size 2.12.3.6. TX MAC Configuration 2.12.3.7. EHIP TX MAC Feature Configuration 2.12.3.8. TX MAC Source Address Lower Bytes 2.12.3.9. TX MAC Source Address Higher Bytes
2.12.4. RX MAC Registers x
2.12.4.1. RX MAC Module Revision ID 2.12.4.2. RX MAC Scratch Register 2.12.4.3. Maximum RX Frame Size 2.12.4.4. RX CRC Forwarding 2.12.4.5. Link Fault Status 2.12.4.6. RX MAC Configuration 2.12.4.7. EHIP RX MAC Feature Configuration
2.12.5. Pause and Priority- Based Flow Control Registers x
2.12.5.1. TXSFC Module Revision ID 2.12.5.2. TX SFC Scratch Register 2.12.5.3. Enable TX Pause Ports 2.12.5.4. TX Pause Request 2.12.5.5. Enable Automatic TX Pause Retransmission 2.12.5.6. Retransmit Holdoff Quanta 2.12.5.7. Retransmit Pause Quanta 2.12.5.8. Enable TX XOFF 2.12.5.9. Enable Uniform Holdoff 2.12.5.10. Set Uniform Holdoff 2.12.5.11. Lower 4 bytes of the Destination address for Flow Control 2.12.5.12. Higher 2 bytes of the Destination address for Flow Control 2.12.5.13. Lower 4 bytes of the Source address for Flow Control frames 2.12.5.14. Higher 2 bytes of the Source address for Flow Control frames 2.12.5.15. TX Flow Control Feature Configuration 2.12.5.16. Pause Quanta 0 2.12.5.17. Pause Quanta 1 2.12.5.18. Pause Quanta 2 2.12.5.19. Pause Quanta 3 2.12.5.20. Pause Quanta 4 2.12.5.21. Pause Quanta 5 2.12.5.22. Pause Quanta 6 2.12.5.23. Pause Quanta 7 2.12.5.24. PFC Holdoff Quanta 0 2.12.5.25. PFC Holdoff Quanta 1 2.12.5.26. PFC Holdoff Quanta 2 2.12.5.27. PFC Holdoff Quanta 3 2.12.5.28. PFC Holdoff Quanta 4 2.12.5.29. PFC Holdoff Quanta 5 2.12.5.30. PFC Holdoff Quanta 6 2.12.5.31. PFC Holdoff Quanta 7 2.12.5.32. RXSFC Module Revision ID 2.12.5.33. RXSFC Scratch Register 2.12.5.34. Enable RX Pause Frame Processing 2.12.5.35. Forward Flow Control Frames 2.12.5.36. Lower 4 bytes of the Destination address for RX Pause Frames 2.12.5.37. Higher 2 bytes of the Destination address for RX Pause Frames 2.12.5.38. RX Flow Control Feature Configuration
2.12.6. TX Statistics Counter Registers x
2.12.6.1. TX Statistics Registers
2.12.7. RX Statistics Counter Registers x
2.12.7.1. RX Statistics Registers
3. About the E-Tile CPRI PHY Intel® FPGA IP x
3.1. Supported Features 3.2. E-Tile CPRI PHY Intel® FPGA IP Overview 3.3. E-Tile CPRI PHY Device Family Support 3.4. Resource Utilization 3.5. Release Information 3.6. E-Tile CPRI PHY Intel FPGA IP Core Device Speed Grade Support 3.7. Getting Started 3.8. Parameter Settings 3.9. Functional Description 3.10. E-Tile CPRI PHY Intel FPGA IP Interface Signals 3.11. Registers 3.12. Document Revision History for the E-tile CPRI PHY Intel FPGA IP
3.7. Getting Started x
3.7.1. Installing and Licensing Intel® FPGA IP Cores 3.7.2. Specifying the IP Core Parameters and Options 3.7.3. Generated File Structure 3.7.4. E-Tile CPRI PHY Intel FPGA IP Channel Placement 3.7.5. IP Core Testbenches 3.7.6. Compiling the Full Design
3.7.1. Installing and Licensing Intel® FPGA IP Cores x
3.7.1.1. Intel® FPGA IP Evaluation Mode
3.7.4. E-Tile CPRI PHY Intel FPGA IP Channel Placement x
3.7.4.1. One 24.33024 Gbps channel with RS-FEC 3.7.4.2. Two 24.33024 Gbps Channel with RS-FEC 3.7.4.3. Three 24.33024 Gbps channels with RS-FEC 3.7.4.4. Four 24.33024 Gbps channels with RS-FEC 3.7.4.5. Restrictions
3.9. Functional Description x
3.9.1. CPRI PHY Functional Blocks 3.9.2. Dynamic Reconfiguration
3.9.1. CPRI PHY Functional Blocks x
3.9.1.1. E-tile Native PHY 3.9.1.2. Soft Reset Sequencer 3.9.1.3. Latency Measurement
3.9.1.3. Latency Measurement x
3.9.1.3.1. Deterministic Latency Calculation
3.10. E-Tile CPRI PHY Intel FPGA IP Interface Signals x
3.10.1. Clock Signals 3.10.2. TX MII Interface 3.10.3. RX MII Interface 3.10.4. TX 8B/10B Interface 3.10.5. RX 8B/10B Interface 3.10.6. Status Interface for 64B/66B Line Rate 3.10.7. Status Interface for 8B/10B Line Rate 3.10.8. Serial I/O Pins 3.10.9. Reconfiguration Interfaces (Avalon-MM)
3.10.9. Reconfiguration Interfaces (Avalon-MM) x
3.10.9.1. CPRI PHY Reconfiguration Interface 3.10.9.2. Transceiver Reconfiguration Interface 3.10.9.3. RS-FEC Reconfiguration Interface
3.11. Registers x
3.11.1. PHY Registers 3.11.2. CPRI PHY Registers 3.11.3. PMA Registers 3.11.4. RS-FEC Registers
3.11.3. PMA Registers x
3.11.3.1. Minimizing PMA Adaptation Time
4. Supported Tools x
4.1. E-Tile Channel Placement Tool 4.2. Ethernet Toolkit Overview 4.3. Document Revision History for the E-tile Channel Placement Tool and the Ethernet Link Inspector
4.2. Ethernet Toolkit Overview x
4.2.1. Features
1. About E-tile Hard IP User Guide
2. About the E-Tile Hard IP for Ethernet Intel FPGA IP Core
3. About the E-Tile CPRI PHY Intel® FPGA IP
4. Supported Tools
5. E-tile Hard IP User Guide Archives

2.12.6.1. TX Statistics Registers

Table 74.  Transmit Side Statistics Registers

Address

Name-

Description

Access

0x800

TX_FRAGMENTS_31_0

Number of transmitted frames less than 64 bytes and reporting a CRC error (lower 32 bits)

RO

0x801

TX_FRAGMENTS_63_32

Number of transmitted frames less than 64 bytes and reporting a CRC error (upper 32 bits)

RO

0x802

TX_JABBERS_31_0

Number of transmitted oversized frames reporting a CRC error (lower 32 bits)

RO

0x803

TX_JABBERS_63_32

Number of transmitted oversized frames reporting a CRC error (upper 32 bits)

RO

0x804

TX_FCSERR_31_0

Number of transmitted packets with FCS errors. (lower 32 bits)

RO

0x805

TX_FCSERR_63_32

Number of transmitted packets with FCS errors. (upper 32 bits)

RO

0x806

TX_CRCERR_OKPKT_31_0

Number of frames of any size that are malformed but are neither undersized or oversized with a CRC error (lower 32 bits)

RO

0x807

TX_CRCERR_OKPKT_63_32

Number of frames of any size that are malformed but are neither undersized or oversized with a CRC error (upper 32 bits)

RO

0x808

TX_MCAST_DATA_ERR_31_0

Number of errored multicast frames transmitted, excluding control frames (lower 32 bits)

RO

0x809

TX_MCAST_DATA_ERR_63_32

Number of errored multicast frames transmitted, excluding control frames (upper 32 bits)

RO

0x80A

TX_BCAST_DATA_ERR_31_0

Number of errored broadcast frames transmitted, excluding control frames (lower 32 bits)

RO

0x80B

TX_BCAST_DATA_ERR_63_32

Number of errored broadcast frames transmitted, excluding control frames (upper 32 bits)

RO

0x80C

TX_UCAST_DATA_ERR_31_0

Number of errored unicast frames transmitted, excluding control frames (lower 32 bits)

RO

0x80D

TX_UCAST_DATA_ERR_63_32

Number of errored unicast frames transmitted, excluding control frames (upper 32 bits)

RO

0x80E

TX_MCAST_CTRL_ERR_31_0

Number of errored multicast control frames transmitted (lower 32 bits)

RO

0x80F

TX_MCAST_CTRL_ERR_63_32

Number of errored multicast control frames transmitted (upper 32 bits)

RO

0x810

TX_BCAST_CTRL_ERR_31_0

Number of errored broadcast control frames transmitted (lower 32 bits)

RO

0x811

TX_BCAST_CTRL_ERR_63_32

Number of errored broadcast control frames transmitted (upper 32 bits)

RO

0x812

TX_UCAST_CTRL_ERR_31_0

Number of errored unicast control frames transmitted (lower 32 bits)

RO

0x813

TX_UCAST_CTRL_ERR_63_32

Number of errored unicast control frames transmitted (upper 32 bits)

RO

0x814

TX_PAUSE_ERR_31_0

Number of errored pause frames transmitted (lower 32 bits)

RO

0x815

TX_PAUSE_ERR_63_32

Number of errored pause frames transmitted (upper 32 bits)

RO

0x816

TX_64B_31_0

Number of 64-byte transmitted frames (lower 32 bits), including the CRC field but excluding the preamble and SFD bytes

RO

0x817

TX_64B_63_32

Number of 64-byte transmitted frames (upper 32 bits), including the CRC field but excluding the preamble and SFD bytes

RO

0x818

TX_65to127B_31_0

Number of transmitted frames between 65–127 bytes (lower 32 bits)

RO

0x819

TX_65to127B_63_32

Number of transmitted frames between 65–127 bytes (upper 32 bits)

RO

0x81A

TX_128to255B_31_0

Number of transmitted frames between 128–255 bytes (lower 32 bits)

RO

0x81B

TX_128to255B_63_32

Number of transmitted frames between 128–255 bytes (upper 32 bits)

RO

0x81C

TX_256to511B_31_0

Number of transmitted frames between 256–511 bytes (lower 32 bits)

RO

0x81D

TX_256to511B_63_32

Number of transmitted frames between 256–511 bytes (upper 32 bits)

RO

0x81E

TX_512to1023B_31_0

Number of transmitted frames between 512–1023 bytes (lower 32 bits)

RO

0x81F

TX_512to1023B_63_32

Number of transmitted frames between 512–1023 bytes (upper 32 bits)

RO

0x820

TX_1024to1518B_31_0

Number of transmitted frames between 1024–1518 bytes (lower 32 bits)

RO

0x821

TX_1024to1518B_63_32

Number of transmitted frames between 1024–1518 bytes (upper 32 bits)

RO

0x822

TX_1519toMAXB_31_0

Number of transmitted frames of size between 1519 bytes and the number of bytes specified in the MAX_TX_SIZE_CONFIG register (lower 32 bits)

RO

0x823

TX_1519toMAXB_63_32

Number of transmitted frames of size between 1519 bytes and the number of bytes specified in the MAX_TX_SIZE_CONFIG register (upper 32 bits)

RO

0x824

TX_OVERSIZE_31_0

Number of oversized frames (frames with more bytes than the number specified in the MAX_TX_SIZE_CONFIG register) transmitted (lower 32 bits)

RO

0x825

TX_OVERSIZE_63_32

Number of oversized frames (frames with more bytes than the number specified in the MAX_TX_SIZE_CONFIG register) transmitted (upper 32 bits)

RO

0x826

TX_MCAST_DATA_OK_31_0

Number of valid multicast frames transmitted, excluding control frames (lower 32 bits)

RO

0x827

TX_MCAST_DATA_OK_63_32

Number of valid multicast frames transmitted, excluding control frames (upper 32 bits)

RO

0x828

TX_BCAST_DATA_OK_31_0

Number of valid broadcast frames transmitted, excluding control frames (lower 32 bits)

RO

0x829

TX_BCAST_DATA_OK_63_32

Number of valid broadcast frames transmitted, excluding control frames (upper 32 bits)

RO

0x82A

TX_UCAST_DATA_OK_31_0

Number of valid unicast frames transmitted, excluding control frames (lower 32 bits)

RO

0x82B

TX_UCAST_DATA_OK_63_32

Number of valid unicast frames transmitted, excluding control frames (upper 32 bits)

RO

0x82C

TX_MCAST_CTRL_OK_31_0

Number of valid multicast frames transmitted, excluding data frames (lower 32 bits)

RO

0x82D

TX_MCAST_CTRL_OK_63_32

Number of valid multicast frames transmitted, excluding data frames (upper 32 bits)

RO

0x82E

TX_BCAST_CTRL_OK_31_0

Number of valid broadcast frames transmitted, excluding data frames (lower 32 bits)

RO

0x82F

TX_BCAST_CTRL_OK_63_32

Number of valid broadcast frames transmitted, excluding data frames (upper 32 bits)

RO

0x830

TX_UCAST_CTRL_OK_31_0

Number of valid unicast frames transmitted, excluding data frames (lower 32 bits)

RO

0x831

TX_UCAST_CTRL_OK_63_32

Number of valid unicast frames transmitted, excluding data frames (upper 32 bits)

RO

0x832

TX_PAUSE_31_0

Number of valid pause frames transmitted (lower 32 bits)

RO

0x833

TX_PAUSE_63_32

Number of valid pause frames transmitted (upper 32 bits)

RO

0x834

TX_RNT_31_0

Number of transmitted runt packets (lower 32 bits). The IP core does not transmit frames of length less than nine bytes. The IP core pads frames of length nine bytes to 64 bytes to extend them to 64 bytes. Therefore, this counter does not increment in normal operating conditions.

RO

0x835

TX_RNT_63_32

Number of transmitted runt packets (upper 32 bits). The IP core does not transmit frames of length less than nine bytes. The IP core pads frames of length nine bytes to 64 bytes to extend them to 64 bytes. Therefore, this counter does not increment in normal operating conditions.

RO

0x836 TX_st_31_0

Number of TX frame starts (lower 32 bits)

RO

0x837

 TX_st_63_32

Number of TX frame starts (upper 32 bits)

RO

0x838

 TX_lenerr_31_0

Number of frames where the length of the frame advertised in the L/T field was larger than the frame that was received (lower 32 bits).

Length checking must be enabled

RO

0x839

 TX_lenerr_63_32

Number of frames where the length of the frame advertised in the L/T field was larger than the frame that was received (upper 32 bits).

Length checking must be enabled

RO

0x83A

 TX_pfc_err_31_0

Number of malformed TX PFC frames with CRC errors (lower 32 bits)

RO

0x83B

 TX_pfc_err_63_32

Number of malformed TX PFC frames with CRC errors (upper 32 bits)

RO

0x83C

 TX_pfc_31_0

Number of TX PFC frames without error (lower 32 bits)

RO

0x83D

 TX_pfc_63_32

Number of TX PFC frames without error (upper 32 bits)

RO

0x840

 txstat_revid

Returns a 4 byte value indicating the revision of this design

RO

0x841

 txstat_scratch

32 bits of scratch register space for testing

RO

0x842 to 0x844 Reserved
0x845

TX_CNTR_CONFIG

Bits[2:0]: Configuration of TX statistics counters:
  • Bit[2] = 1: Freeze stats CSRs so that all TX Stats values read from the registers will be from the same moment:
    • Note that the actual stats collection counters are not frozen, but because they are all 'read' at the time of the freeze, they are cleared.
    • If a shadow request is started while snapshot is active, a new capture will be executed.
    • Likewise, if a shadow request is active while snapshot is asserted, a new capture will be executed.
    • While either a shadow request or a capture is active, tx_shadow_on will be high.
    • Snapshot and shadow requests apply to several of the RX PCS counters as well as MAC statistics.
  • Bit[1] = 1: Reset the parity error bit in cntr_TX_status.

    • Parity error bit will remain in reset until rst_tx_parity is set back to 0

  • Bit[0] = 1: Reset all TX Stats counters
    • TX stats will stay in reset until reset is set back to 0.
    • Reset also applies when snapshot or shadow is active, and will clear the AVMM visible registers.
    • rst_tx_stats does not clear the parity error bit.
Bits[31:3] are Reserved. 		RW
0x846 TX_CNTR_STATUS
  • Bit[1] =1: The CSRs for the TX Statistics are currently frozen, and holding the statistic values from the last time a shadow request was made.

    Shadow on is asserted for either a shadow request or a snapshot

  • Bit[0] = 1: A parity error was detected on at least one of the statistics counters since the last time this bit was cleared
    • Statistics counter values are stored periodically by EHIP for long term storage.
    • Whenever a counter value is stored, a parity value is calculated for the new value.
    • Whenever a stats value is updated, the parity value of the old value is calculated. If it doesn't match the stored value, the sticky parity error bit is asserted.
    • If tx_parity_err is high, it means sometime in the past, a parity error was detected on the stats memory.
Bits[31:2] are Reserved. 		RO
0x847–0x85F

Reserved
0x860 TX_Payload_OctetsOK_31_0 Number of transmitted payload bytes in frames with no FCS, undersized, oversized, or payload length errors.
  • When TX VLAN/SVLAN detection is enabled, VLAN/SVLAN header bytes are also removed from the count
  • For single lane EHIP modules (10G or 25G), packets that start within 4 bytes of a the previous packet's TERM are not counted (malformed).
RO
0x861 TX_Payload_OctetsOK_63_32 RO
0x862 TX_Frame_OctetsOK_31_0 Number of transmitted bytes in frames with no FCS, undersized, oversized, or payload length errors.

For single lane EHIP modules (10G or 25G), packets that start within 4 bytes of a the previous packet's TERM are not counted (malformed).

RO
0x863 TX_Frame_OctetsOK_63_32 RO
0x864 TX_Malformed_CTRL_31_0
Records the number of TX packets that were malformed.
  • A packet is malformed if it is interrupted by an MII Control byte other than TERM and ERROR
  • Packets that have ERROR control bytes but end with a TERM are not considered malformed
  • For single lane EHIP modules (10G or 25G), packets that start within 4 bytes of a the previous packet's TERM are not counted (malformed).
RO
0x865 TX_Malformed_CTRL_63_32 RO
0x866 TX_Dropped_CTRL_31_0 Records the number of TX packets dropped due to errors.
  • The TXMAC automatically pads short frames, except when i_skip_crc is asserted from the packet
  • When CRC is skipped, if the packet is shorter than 21 bytes, it will be counted as a TX dropped packet
RO
0x867 TX_Dropped_CTRL_63_32 RO
0x868 TX_BadLt_CTRL_31_0 Records the number of TX frames that arrived with a Length/Type field that was neither a length nor a type.
  • L/T is considered to be a Length field if the value in the field is 16'd1500 or less
  • L/T is considered to be a Type field if the value in the field is 16'd1536 or more
  • If a packet has a L/T field with value between 16'd1501 and 16'd1535 (inclusive), the L/T field is considered bad, and the counter is incremented
Note: If TX_VLAN/SVLAN detection is turned on, it is the L/T field inside the VLAN/SVLAN header that is evaluated.
RO
0x869 TX_BadLt_CTRL_63_32 RO
Level Two Title