Intel® FPGA Power and Thermal Calculator User Guide

ID 683445
Date 10/04/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.9. Intel® FPGA PTC - PLL Page

Each row in the PLL page of the Intel® FPGA Power and Thermal Calculator ( Intel® FPGA PTC) represents one or more PLLs in the device.

Supported PLL types are family dependent, as outlined in the PLL Page Information table, below.

Figure 16. PLL Page of the Intel® FPGA PTC

Table 10.  PLL Summary Information
Column Header Description
Total thermal power (W) Reports the total thermal power (in W).
fPLL utilization Reports the percentage of fPLL utilization. (This field is available for Intel® Stratix® 10 devices only.)
IO PLL utilization Reports the percentage of I/O PLL utilization.
ATX PLL utilization Reports the percentage of ATX PLL utilization. (This field is available for Intel® Stratix® 10 devices only.)
CMU/CDR PLL utilization Reports the percentage of CMU/CDR PLL utilization. (This field is available for Intel® Stratix® 10 devices only.)
Power rails Indicated the voltage (mV), dynamic current (A), and standby current (A), for various power rails.

Table 11.  PLL Page Information
Column Heading Description
Module Specify a name for the PLL in this column. This is an optional value.
PLL Type Specifies the type of PLL, which may include the following:
  • Fabric-feeding IOPLLs
  • I/O bank IOPLLs
  • fPLLs
  • CMU PLLs
  • I/O PLLs
  • ATX PLLs
(The availability of some PLL types depends on the selected device.)
Bank ID The I/O bank ID for this row. A bank location can be assigned to PLLs to change how the PLLs are placed, affecting thermals and utilization. (This column is available for Intel® Agilex™ devices only.)
# PLL Blocks Enter the number of PLL blocks with the same combination of parameters.
XCVR Die ID

Specify the transceiver die on which PLLs on this row are located. This field is not applicable for I/O PLLs, nor fabric-feeding I/O PLLs.

# Counters Enter the number of counters of the PLL.
VCCR_GXB and VCCT_GXB Voltage Specify the voltage of the VCCR_GXB and VCCT_GXB rails. This field is not applicable for I/O PLLs, nor fabric-feeding I/O PLLs.
Output Freq (MHz) Specify the output frequency for CMU and ATX PLLs.
VCO Freq (MHz) Specify the internal VCO operating frequency for PLLs.
Total Power (W) Shows the total estimated power for this row (in W).
User Comments Enter any comments. This is an optional entry.

For more information about the PLLs available in Intel® Agilex™ devices, refer to the Intel® Agilex™ Clocking and PLL User Guide.