Visible to Intel only — GUID: diz1473845740711
Ixiasoft
2.7. Hardware Setup
To run the hardware test for parallel loopback designs, connect an SDI video generator to the receiver input pin.
- Connect an external video analyzer to the TX instance to verify full functionality.
- To validate if the RX core locks to the signal and receives the video data correctly, use the on-board LEDs that display the RX status.
To run the hardware test for serial loopback designs, connect the transmitter output pin directly to the receiver input pin.
- To validate if the RX core locks to the signal and receives the video data correctly, use the on-board LEDs that display the RX status.
- You may also connect an SDI signal analyzer to the transmitter output pin to view the generated image.
SW1.1 ON/OFF | Function |
---|---|
ON | D9, D7, and D4 indicate the receiver video standard:
|
OFF |
|