Visible to Intel only — GUID: uxa1510885220395
Ixiasoft
1. CvP Initialization in Intel® Cyclone® 10 GX
2. Design Considerations for CvP Initialization in Intel® Cyclone® 10 GX
3. Understanding the Design Steps for CvP Initialization in Intel® Cyclone® 10 GX
4. CvP Driver and Registers
A. Document Revision History for Intel® Cyclone® 10 GX CvP Initialization over PCI Express User Guide
4.3.1. Intel® -defined Vendor Specific Capability Header Register
4.3.2. Intel® -defined Vendor Specific Header Register
4.3.3. Intel® Marker Register
4.3.4. CvP Status Register
4.3.5. CvP Mode Control Register
4.3.6. CvP Data Registers
4.3.7. CvP Programming Control Register
4.3.8. Uncorrectable Internal Error Status Register
4.3.9. Uncorrectable Internal Error Mask Register
4.3.10. Correctable Internal Error Status Register
4.3.11. Correctable Internal Error Mask Register
Visible to Intel only — GUID: uxa1510885220395
Ixiasoft
3.5. Bringing up the Hardware
Before testing the design in hardware, you must install Jungo WinDriver in your DUT system. You can also install RW Utilities or other system verification tools to monitor the link status of the Endpoint and to observe traffic on the link. You can download these utilities for free from many web sites.
The test setup includes the following components:
- Intel® Cyclone® 10 GX FPGA Development Kit
- Intel® FPGA Download Cable
- A DUT PC with PCI Express slot to plug in the Intel® Cyclone® 10 GX FPGA Development Kit
- A host PC running the Intel® Quartus® Prime software to program the periphery image, .sof or .pof file.