F-Tile CPRI PHY Intel® FPGA IP Design Example User Guide

Download PDF
ID 683281
Date 12/13/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Quick Start Guide 2. Design Example Description 3. F-Tile CPRI PHY Intel® FPGA IP Design Example User Guide Archives 4. Document Revision History for F-Tile CPRI PHY Intel® FPGA IP Design Example User Guide
1. Quick Start Guide x
1.1. Hardware and Software Requirements 1.2. Generating the Design 1.3. Directory Structure 1.4. Simulating the Design Example Testbench 1.5. Compiling the Compilation-Only Project 1.6. Compiling and Configuring the Design Example in Hardware 1.7. Testing the Hardware Design Example 1.8. Transceiver Toolkit
2. Design Example Description x
2.1. Features 2.2. Design Example Components 2.3. Simulation Design Example 2.4. Hardware Design Example 2.5. Interface Signals 2.6. Design Example Registers
2.2. Design Example Components x
2.2.1. Packet Client 2.2.2. Round Trip Counter 2.2.3. Sources and Probes 2.2.4. Avalon® Memory-Mapped Decoder 2.2.5. JTAG Host 2.2.6. IOPLL 2.2.7. System PLL
1. Quick Start Guide
2. Design Example Description
3. F-Tile CPRI PHY Intel® FPGA IP Design Example User Guide Archives
4. Document Revision History for F-Tile CPRI PHY Intel® FPGA IP Design Example User Guide

1.7. Testing the Hardware Design Example

After you compile the F-Tile CPRI PHY Intel® FPGA IP core design example and configure it on your Intel® Agilex™ device, you can use the System Console to program the IP core and its PHY IP core registers.

To start the System Console and test the hardware design example, follow these steps:

  1. After the hardware design example is configured on the Intel® Agilex™ device, in the Intel® Quartus® Prime Pro Edition software, click Tools > System Debugging Tools > System Console.
  2. In the Tcl Console pane, type cd hwtest to change directory to <design_example_dir>/hardware_test_design/hwtest_sl.
  3. Type source main_script.tcl to open a connection to the JTAG master and start the test.
Level Two Title