ModelSim* - Intel® FPGA Edition Simulation Quick-Start: Intel® Quartus® Prime Standard Edition

Download PDF
ID 683248
Date 12/30/2019
Public
Document Table of Contents
Document Table of Contents x
1. ModelSim* - Intel® FPGA Edition Simulation Quick-Start ( Intel® Quartus® Prime Standard Edition) 2. ModelSim* - Intel® FPGA Edition Simulation Quick-Start Revision History
1. ModelSim* - Intel® FPGA Edition Simulation Quick-Start ( Intel® Quartus® Prime Standard Edition) x
1.1. Open the Example Design 1.2. Specify EDA Tool Settings 1.3. Launch Simulation from the Intel® Quartus® Prime Software 1.4. View Signal Waveforms 1.5. Add Signals to the Simulation 1.6. Rerun Simulation 1.7. Modify the Simulation Testbench 1.8. (Optional) Run Simulation at Command Line
1. ModelSim* - Intel® FPGA Edition Simulation Quick-Start ( Intel® Quartus® Prime Standard Edition)
2. ModelSim* - Intel® FPGA Edition Simulation Quick-Start Revision History

1.7. Modify the Simulation Testbench

The testbench_1.v example testbench tests only a specific set of conditions and test cases. You can manually edit the testbench_1.v file in the ModelSim* - Intel® FPGA Edition simulator to test other cases and conditions:
  1. Open the testbench_1.v file in the ModelSim* - Intel® FPGA Edition simulator.
  2. Right-click in the testbench_1.v file to confirm that the file is not set to Read Only.
  3. Enter and save any additional testbench parameters in the testbench_1.v file.
  4. To generate the waveforms for a testbench that you modify, click Simulate > Restart.
  5. Click Simulate > Run > Run -all.
Level Two Title